---

yaml --- r: 20201 b: refs/heads/master c: 0825c5d h: refs/heads/master i: 20199: 553ad97 v: v3
git-mirror · Feb 10, 2006 · 1a9a140 · 1a9a140
1 parent dac8395
commit 1a9a140
Show file tree

Hide file tree

Showing 54 changed files with 405 additions and 613 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e19816808346cc1619733532a267a11dce8f8a12
+refs/heads/master: 0825c5d0f717816916f0e5ef9d89be51b3c52786
diff --git a/trunk/Documentation/powerpc/booting-without-of.txt b/trunk/Documentation/powerpc/booting-without-of.txt
@@ -44,7 +44,6 @@
                            compiler and the textural representation of
                            the tree that can be "compiled" by dtc.
 
-
    November 21, 2005: Rev 0.5
 			 - Additions/generalizations for 32-bit
 			 - Changed to reflect the new arch/powerpc
@@ -1307,6 +1306,65 @@ platforms are moved over to use the flattened-device-tree model.
 	};
 
 
+   f) Freescale SOC USB controllers
+
+   The device node for a USB controller that is part of a Freescale
+   SOC is as described in the document "Open Firmware Recommended
+   Practice : Universal Serial Bus" with the following modifications
+   and additions :  
+
+   Required properties :
+    - compatible : Should be "fsl-usb2-mph" for multi port host usb
+      controllers, or "fsl-usb2-dr" for dual role usb controllers
+    - phy_type : For multi port host usb controllers, should be one of
+      "ulpi", or "serial". For dual role usb controllers, should be
+      one of "ulpi", "utmi", "utmi_wide", or "serial".
+    - reg : Offset and length of the register set for the device
+    - port0 : boolean; if defined, indicates port0 is connected for
+      fsl-usb2-mph compatible controllers.  Either this property or
+      "port1" (or both) must be defined for "fsl-usb2-mph" compatible 
+      controllers.
+    - port1 : boolean; if defined, indicates port1 is connected for
+      fsl-usb2-mph compatible controllers.  Either this property or
+      "port0" (or both) must be defined for "fsl-usb2-mph" compatible 
+      controllers.
+
+   Recommended properties :
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of interrupt
+      controller you have.
+    - interrupt-parent : the phandle for the interrupt controller that
+      services interrupts for this device.
+
+   Example multi port host usb controller device node : 
+	usb@22000 {
+	        device_type = "usb";
+		compatible = "fsl-usb2-mph";
+		reg = <22000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <27 1>;
+		phy_type = "ulpi";
+		port0;
+		port1;
+	};
+
+   Example dual role usb controller device node : 
+	usb@23000 {
+		device_type = "usb";
+		compatible = "fsl-usb2-dr";
+		reg = <23000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <26 1>;
+		phy = "ulpi";
+	};
+
+
    More devices will be defined as this spec matures.
 
 

diff --git a/trunk/arch/i386/kernel/smpboot.c b/trunk/arch/i386/kernel/smpboot.c
@@ -87,11 +87,7 @@ EXPORT_SYMBOL(cpu_online_map);
 cpumask_t cpu_callin_map;
 cpumask_t cpu_callout_map;
 EXPORT_SYMBOL(cpu_callout_map);
-#ifdef CONFIG_HOTPLUG_CPU
-cpumask_t cpu_possible_map = CPU_MASK_ALL;
-#else
 cpumask_t cpu_possible_map;
-#endif
 EXPORT_SYMBOL(cpu_possible_map);
 static cpumask_t smp_commenced_mask;
 

diff --git a/trunk/arch/i386/mach-voyager/voyager_smp.c b/trunk/arch/i386/mach-voyager/voyager_smp.c
@@ -240,7 +240,7 @@ static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
 cpumask_t cpu_callin_map = CPU_MASK_NONE;
 cpumask_t cpu_callout_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_callout_map);
-cpumask_t cpu_possible_map = CPU_MASK_ALL;
+cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 /* The per processor IRQ masks (these are usually kept in sync) */

diff --git a/trunk/arch/ia64/ia32/ia32_signal.c b/trunk/arch/ia64/ia32/ia32_signal.c
@@ -515,6 +515,7 @@ sys32_signal (int sig, unsigned int handler)
 
 	sigact_set_handler(&new_sa, handler, 0);
 	new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK;
+	sigemptyset(&new_sa.sa.sa_mask);
 
 	ret = do_sigaction(sig, &new_sa, &old_sa);
 

diff --git a/trunk/arch/ia64/kernel/entry.S b/trunk/arch/ia64/kernel/entry.S
@@ -1601,5 +1601,21 @@ sys_call_table:
 	data8 sys_inotify_add_watch
 	data8 sys_inotify_rm_watch
 	data8 sys_migrate_pages			// 1280
+	data8 sys_openat
+	data8 sys_mkdirat
+	data8 sys_mknodat
+	data8 sys_fchownat
+	data8 sys_futimesat			// 1285
+	data8 sys_newfstatat
+	data8 sys_unlinkat
+	data8 sys_renameat
+	data8 sys_linkat
+	data8 sys_symlinkat			// 1290
+	data8 sys_readlinkat
+	data8 sys_fchmodat
+	data8 sys_faccessat
+	data8 sys_ni_syscall			// reserved for pselect
+	data8 sys_ni_syscall			// 1295 reserved for ppoll
+	data8 sys_unshare
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
diff --git a/trunk/arch/ia64/kernel/fsys.S b/trunk/arch/ia64/kernel/fsys.S
@@ -878,31 +878,8 @@ fsyscall_table:
 	data8 0				// timer_delete
 	data8 0				// clock_settime
 	data8 fsys_clock_gettime	// clock_gettime
-	data8 0				// clock_getres		// 1255
-	data8 0				// clock_nanosleep
-	data8 0				// fstatfs64
-	data8 0				// statfs64
-	data8 0
-	data8 0							// 1260
-	data8 0
-	data8 0				// mq_open
-	data8 0				// mq_unlink
-	data8 0				// mq_timedsend
-	data8 0				// mq_timedreceive	// 1265
-	data8 0				// mq_notify
-	data8 0				// mq_getsetattr
-	data8 0				// kexec_load
-	data8 0
-	data8 0							// 1270
-	data8 0
-	data8 0
-	data8 0
-	data8 0
-	data8 0							// 1275
-	data8 0
-	data8 0
-	data8 0
-	data8 0
-	data8 0							// 1280
+	#define __NR_syscall_last	1255
+
+	.space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
 
 	.org fsyscall_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
diff --git a/trunk/arch/ia64/kernel/mca_drv.c b/trunk/arch/ia64/kernel/mca_drv.c
@@ -437,6 +437,9 @@ recover_from_read_error(slidx_table_t *slidx,
 	 *    the process not have any locks of kernel.
 	 */
 
+	/* Is minstate valid? */
+	if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate))
+		return 0;
 	psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr);
 
 	/*

diff --git a/trunk/arch/ia64/sn/kernel/io_init.c b/trunk/arch/ia64/sn/kernel/io_init.c
@@ -617,15 +617,15 @@ void sn_bus_store_sysdata(struct pci_dev *dev)
 void sn_bus_free_sysdata(void)
 {
 	struct sysdata_el *element;
-	struct list_head *list;
+	struct list_head *list, *safe;
 
-sn_sysdata_free_start:
-	list_for_each(list, &sn_sysdata_list) {
+	list_for_each_safe(list, safe, &sn_sysdata_list) {
 		element = list_entry(list, struct sysdata_el, entry);
 		list_del(&element->entry);
+		list_del(&(((struct pcidev_info *)
+			     (element->sysdata))->pdi_list));
 		kfree(element->sysdata);
 		kfree(element);
-		goto sn_sysdata_free_start;
 	}
 	return;
 }

diff --git a/trunk/arch/ia64/sn/kernel/irq.c b/trunk/arch/ia64/sn/kernel/irq.c
@@ -299,7 +299,9 @@ void sn_irq_unfixup(struct pci_dev *pci_dev)
 		return;
 
 	sn_irq_info = SN_PCIDEV_INFO(pci_dev)->pdi_sn_irq_info;
-	if (!sn_irq_info || !sn_irq_info->irq_irq) {
+	if (!sn_irq_info)
+		return;
+	if (!sn_irq_info->irq_irq) {
 		kfree(sn_irq_info);
 		return;
 	}

diff --git a/trunk/arch/powerpc/Kconfig b/trunk/arch/powerpc/Kconfig
@@ -83,6 +83,12 @@ config GENERIC_TBSYNC
 	default y if PPC32 && SMP
 	default n
 
+config DEFAULT_UIMAGE
+	bool
+	help
+	  Used to allow a board to specify it wants a uImage built by default
+	default n
+
 menu "Processor support"
 choice
 	prompt "Processor Type"

diff --git a/trunk/arch/powerpc/Makefile b/trunk/arch/powerpc/Makefile
@@ -142,6 +142,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 # Default to zImage, override when needed
 defaultimage-y			:= zImage
 defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
+defaultimage-$(CONFIG_DEFAULT_UIMAGE) := uImage
 KBUILD_IMAGE := $(defaultimage-y)
 all: $(KBUILD_IMAGE)
 
@@ -167,6 +168,8 @@ endef
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
+
+archmrproper:
 	$(Q)rm -rf arch/$(ARCH)/include
 
 archprepare: checkbin

diff --git a/trunk/arch/powerpc/kernel/Makefile b/trunk/arch/powerpc/kernel/Makefile
@@ -12,10 +12,10 @@ endif
 
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
 				   irq.o align.o signal_32.o pmc.o vdso.o \
-				   init_task.o process.o
+				   init_task.o process.o systbl.o
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
-				   signal_64.o ptrace32.o systbl.o \
+				   signal_64.o ptrace32.o \
 				   paca.o cpu_setup_power4.o \
 				   firmware.o sysfs.o idle_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
@@ -46,7 +46,7 @@ extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
 obj-y				+= time.o prom.o traps.o setup-common.o udbg.o
-obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o systbl.o
+obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o
 obj-$(CONFIG_PPC64)		+= misc_64.o dma_64.o iommu.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o

diff --git a/trunk/arch/powerpc/kernel/systbl.S b/trunk/arch/powerpc/kernel/systbl.S
@@ -36,8 +36,6 @@
 #ifdef CONFIG_PPC64
 #define sys_sigpending	sys_ni_syscall
 #define sys_old_getrlimit sys_ni_syscall
-#else
-#define ppc_rtas	sys_ni_syscall
 #endif
 
 _GLOBAL(sys_call_table)
@@ -323,3 +321,4 @@ SYSCALL(spu_run)
 SYSCALL(spu_create)
 COMPAT_SYS(pselect6)
 COMPAT_SYS(ppoll)
+SYSCALL(unshare)