---

yaml --- r: 375495 b: refs/heads/master c: 3086c9f h: refs/heads/master i: 375493: 914314d 375491: 81f37e1 375487: 6d93d6d v: v3
git-mirror · May 6, 2013 · 1bb9a97 · 1bb9a97
1 parent 17dea76
commit 1bb9a97
Show file tree

Hide file tree

Showing 383 changed files with 4,018 additions and 2,603 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0d2d0cc5216db678070efc911ef47f4cb53b4aad
+refs/heads/master: 3086c9f6482101b3c06935cdfb4d4b56adb60097
diff --git a/trunk/Documentation/DocBook/device-drivers.tmpl b/trunk/Documentation/DocBook/device-drivers.tmpl
@@ -227,7 +227,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250.c
+!Edrivers/tty/serial/8250/8250_core.c
   </chapter>
 
   <chapter id="fbdev">

diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -596,16 +596,33 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			is selected automatically. Check
 			Documentation/kdump/kdump.txt for further details.
 
-	crashkernel_low=size[KMG]
-			[KNL, x86] parts under 4G.
-
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for an example.
 
+	crashkernel=size[KMG],high
+			[KNL, x86_64] range could be above 4G. Allow kernel
+			to allocate physical memory region from top, so could
+			be above 4G if system have more than 4G ram installed.
+			Otherwise memory region will be allocated below 4G, if
+			available.
+			It will be ignored if crashkernel=X is specified.
+	crashkernel=size[KMG],low
+			[KNL, x86_64] range under 4G. When crashkernel=X,high
+			is passed, kernel could allocate physical memory region
+			above 4G, that cause second kernel crash on system
+			that require some amount of low memory, e.g. swiotlb
+			requires at least 64M+32K low memory.  Kernel would
+			try to allocate 72M below 4G automatically.
+			This one let user to specify own low range under 4G
+			for second kernel instead.
+			0: to disable low allocation.
+			It will be ignored when crashkernel=X,high is not used
+			or memory reserved is below 4G.
+
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -788,6 +805,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	edd=		[EDD]
 			Format: {"off" | "on" | "skip[mbr]"}
 
+	efi_no_storage_paranoia [EFI; X86]
+			Using this parameter you can use more than 50% of
+			your efi variable storage. Use this parameter only if
+			you are really sure that your UEFI does sane gc and
+			fulfills the spec otherwise your board may brick.
+
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
 

diff --git a/trunk/Documentation/scsi/LICENSE.qla2xxx b/trunk/Documentation/scsi/LICENSE.qla2xxx
@@ -1,4 +1,4 @@
-Copyright (c) 2003-2012 QLogic Corporation
+Copyright (c) 2003-2013 QLogic Corporation
 QLogic Linux FC-FCoE Driver
 
 This program includes a device driver for Linux 3.x.

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -4941,6 +4941,12 @@ W:	logfs.org
 S:	Maintained
 F:	fs/logfs/
 
+LPC32XX MACHINE SUPPORT
+M:	Roland Stigge <stigge@antcom.de>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-lpc32xx/
+
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
 M:	Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
 M:	Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
@@ -6625,7 +6631,7 @@ S:	Supported
 F:	fs/reiserfs/
 
 REGISTER MAP ABSTRACTION
-M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Mark Brown <broonie@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
 S:	Supported
 F:	drivers/base/regmap/
@@ -6951,7 +6957,6 @@ F:	drivers/scsi/st*
 
 SCTP PROTOCOL
 M:	Vlad Yasevich <vyasevich@gmail.com>
-M:	Sridhar Samudrala <sri@us.ibm.com>
 M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
@@ -7374,7 +7379,7 @@ F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 M:	Liam Girdwood <lgirdwood@gmail.com>
-M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Mark Brown <broonie@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
@@ -7463,7 +7468,7 @@ F:	drivers/clk/spear/
 
 SPI SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
-M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Mark Brown <broonie@kernel.org>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
 T:	git git://git.secretlab.ca/git/linux-2.6.git
@@ -8708,7 +8713,7 @@ F:	drivers/scsi/vmw_pvscsi.h
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
 M:	Liam Girdwood <lrg@ti.com>
-M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Mark Brown <broonie@kernel.org>
 W:	http://opensource.wolfsonmicro.com/node/15
 W:	http://www.slimlogic.co.uk/?p=48
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/regulator.git

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*
@@ -513,7 +513,8 @@ ifeq ($(KBUILD_EXTMOD),)
 # Carefully list dependencies so we do not try to build scripts twice
 # in parallel
 PHONY += scripts
-scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
+	 asm-generic
 	$(Q)$(MAKE) $(build)=$(@)
 
 # Objects we will link into vmlinux / subdirs we need to visit

diff --git a/trunk/arch/alpha/Makefile b/trunk/arch/alpha/Makefile
@@ -12,7 +12,7 @@ NM := $(NM) -B
 
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
-cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4

diff --git a/trunk/arch/alpha/include/asm/floppy.h b/trunk/arch/alpha/include/asm/floppy.h
@@ -26,7 +26,7 @@
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
 #define fd_cacheflush(addr,size) /* nothing */
 #define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
-					    IRQF_DISABLED, "floppy", NULL)
+					    0, "floppy", NULL)
 #define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL)
 
 #ifdef CONFIG_PCI

diff --git a/trunk/arch/alpha/kernel/irq.c b/trunk/arch/alpha/kernel/irq.c
@@ -117,13 +117,6 @@ handle_irq(int irq)
 		return;
 	}
 
-	/*
-	 * From here we must proceed with IPL_MAX. Note that we do not
-	 * explicitly enable interrupts afterwards - some MILO PALcode
-	 * (namely LX164 one) seems to have severe problems with RTI
-	 * at IPL 0.
-	 */
-	local_irq_disable();
 	irq_enter();
 	generic_handle_irq_desc(irq, desc);
 	irq_exit();

diff --git a/trunk/arch/alpha/kernel/irq_alpha.c b/trunk/arch/alpha/kernel/irq_alpha.c
@@ -45,6 +45,14 @@ do_entInt(unsigned long type, unsigned long vector,
 	  unsigned long la_ptr, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
+
+	/*
+	 * Disable interrupts during IRQ handling.
+	 * Note that there is no matching local_irq_enable() due to
+	 * severe problems with RTI at IPL0 and some MILO PALcode
+	 * (namely LX164).
+	 */
+	local_irq_disable();
 	switch (type) {
 	case 0:
 #ifdef CONFIG_SMP
@@ -62,7 +70,6 @@ do_entInt(unsigned long type, unsigned long vector,
 	  {
 		long cpu;
 
-		local_irq_disable();
 		smp_percpu_timer_interrupt(regs);
 		cpu = smp_processor_id();
 		if (cpu != boot_cpuid) {
@@ -222,7 +229,6 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 
 struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
 	.name		= "timer",
 };
 

diff --git a/trunk/arch/alpha/kernel/sys_nautilus.c b/trunk/arch/alpha/kernel/sys_nautilus.c
@@ -188,6 +188,10 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 extern void free_reserved_mem(void *, void *);
 extern void pcibios_claim_one_bus(struct pci_bus *);
 
+static struct resource irongate_io = {
+	.name	= "Irongate PCI IO",
+	.flags	= IORESOURCE_IO,
+};
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -209,6 +213,7 @@ nautilus_init_pci(void)
 
 	irongate = pci_get_bus_and_slot(0, 0);
 	bus->self = irongate;
+	bus->resource[0] = &irongate_io;
 	bus->resource[1] = &irongate_mem;
 
 	pci_bus_size_bridges(bus);

diff --git a/trunk/arch/alpha/kernel/sys_titan.c b/trunk/arch/alpha/kernel/sys_titan.c
@@ -280,15 +280,15 @@ titan_late_init(void)
 	 * all reported to the kernel as machine checks, so the handler
 	 * is a nop so it can be called to count the individual events.
 	 */
-	titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(63+16, titan_intr_nop, 0,
 		    "CChip Error", NULL);
-	titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(62+16, titan_intr_nop, 0,
 		    "PChip 0 H_Error", NULL);
-	titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(61+16, titan_intr_nop, 0,
 		    "PChip 1 H_Error", NULL);
-	titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(60+16, titan_intr_nop, 0,
 		    "PChip 0 C_Error", NULL);
-	titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(59+16, titan_intr_nop, 0,
 		    "PChip 1 C_Error", NULL);
 
 	/* 
@@ -348,9 +348,9 @@ privateer_init_pci(void)
 	 * Hook a couple of extra err interrupts that the
 	 * common titan code won't.
 	 */
-	titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(53+16, titan_intr_nop, 0,
 		    "NMI", NULL);
-	titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(50+16, titan_intr_nop, 0,
 		    "Temperature Warning", NULL);
 
 	/*

diff --git a/trunk/arch/arc/include/asm/irqflags.h b/trunk/arch/arc/include/asm/irqflags.h
@@ -39,7 +39,7 @@ static inline long arch_local_irq_save(void)
 	"	flag.nz %0		\n"
 	: "=r"(temp), "=r"(flags)
 	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
-	: "cc");
+	: "memory", "cc");
 
 	return flags;
 }
@@ -53,7 +53,8 @@ static inline void arch_local_irq_restore(unsigned long flags)
 	__asm__ __volatile__(
 	"	flag %0			\n"
 	:
-	: "r"(flags));
+	: "r"(flags)
+	: "memory");
 }
 
 /*
@@ -73,7 +74,8 @@ static inline void arch_local_irq_disable(void)
 	"	and %0, %0, %1		\n"
 	"	flag %0			\n"
 	: "=&r"(temp)
-	: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK)));
+	: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK))
+	: "memory");
 }
 
 /*
@@ -85,7 +87,9 @@ static inline long arch_local_save_flags(void)
 
 	__asm__ __volatile__(
 	"	lr  %0, [status32]	\n"
-	: "=&r"(temp));
+	: "=&r"(temp)
+	:
+	: "memory");
 
 	return temp;
 }

diff --git a/trunk/arch/arm/boot/dts/imx28-m28evk.dts b/trunk/arch/arm/boot/dts/imx28-m28evk.dts
@@ -152,7 +152,6 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
 				status = "okay";
 
 				sgtl5000: codec@0a {

diff --git a/trunk/arch/arm/boot/dts/imx28-sps1.dts b/trunk/arch/arm/boot/dts/imx28-sps1.dts
@@ -70,7 +70,6 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
 				status = "okay";
 
 				rtc: rtc@51 {

diff --git a/trunk/arch/arm/boot/dts/imx6qdl.dtsi b/trunk/arch/arm/boot/dts/imx6qdl.dtsi
@@ -91,6 +91,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
+			clocks = <&clks 15>;
 		};
 
 		L2: l2-cache@00a02000 {

diff --git a/trunk/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/trunk/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -96,11 +96,11 @@
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp44";
+				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp45";
+				marvell,pins = "mpp47";
 				marvell,function = "gpio";
 			};
 
@@ -157,14 +157,14 @@
 			gpios = <&gpio0 16 0>;
 			linux,default-trigger = "default-on";
 		};
-		health_led1 {
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 0>;
+		};
+		health_led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 0>;
 		};
-		health_led2 {
-			label = "status:white:health_led";
-			gpios = <&gpio1 4 0>;
-		};
 		backup_led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 0>;

diff --git a/trunk/arch/arm/include/asm/glue-cache.h b/trunk/arch/arm/include/asm/glue-cache.h
@@ -19,14 +19,6 @@
 #undef _CACHE
 #undef MULTI_CACHE
 
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v3
-# endif
-#endif
-
 #if defined(CONFIG_CPU_CACHE_V4)
 # ifdef _CACHE
 #  define MULTI_CACHE 1

diff --git a/trunk/arch/arm/include/asm/hardware/iop3xx.h b/trunk/arch/arm/include/asm/hardware/iop3xx.h
@@ -37,7 +37,7 @@ extern int iop3xx_get_init_atu(void);
  * IOP3XX processor registers
  */
 #define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfeffe000
+#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfedfe000
 #define IOP3XX_PERIPHERAL_SIZE		0x00002000
 #define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
 					IOP3XX_PERIPHERAL_SIZE - 1)

diff --git a/trunk/arch/arm/include/asm/pgtable-3level.h b/trunk/arch/arm/include/asm/pgtable-3level.h
@@ -111,7 +111,7 @@
 #define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
 #define L_PTE_S2_MT_WRITEBACK	 (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
 #define L_PTE_S2_RDONLY		 (_AT(pteval_t, 1) << 6)   /* HAP[1]   */
-#define L_PTE_S2_RDWR		 (_AT(pteval_t, 2) << 6)   /* HAP[2:1] */
+#define L_PTE_S2_RDWR		 (_AT(pteval_t, 3) << 6)   /* HAP[2:1] */
 
 /*
  * Hyp-mode PL2 PTE definitions for LPAE.