Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa

* git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (124 commits)
  [ALSA] version 1.0.11rc4
  [PATCH] Intruduce DMA_28BIT_MASK
  [ALSA] hda-codec - Add support for ASUS P4GPL-X
  [ALSA] hda-codec - Add support for HP nx9420 laptop
  [ALSA] Fix memory leaks in error path of control.c
  [ALSA] AMD Au1x00: AC'97 controller is memory mapped
  [ALSA] AMD Au1x00: fix DMA init/cleanup
  [ALSA] hda-codec - Fix generic auto-configurator
  [ALSA] hda-codec - Fix BIOS auto-configuration
  [ALSA] Fixes typos in Audiophile-USB.txt
  [ALSA] ice1712 - typo fixes for dxr_enable module option
  [ALSA] AMD Au1x00: make driver build after cleanup
  [ALSA] ice1712 - Fix wrong value types for enum items
  [ALSA] fix resource leak in usbmixer
  [ALSA] Fix gus_pcm dereference before NULL
  [ALSA] Fix seq_clientmgr dereferences before NULL check
  [ALSA] hda-codec - Fix for Samsung R65 and ASUS A6J
  [ALSA] hda-codec - Add support for VAIO FE550G and SZ110
  [ALSA] usb-audio: add Maya44 mixer control names
  [ALSA] usb-audio: add Casio PL-40R support
  ...

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -513,6 +513,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards and autoprobe.
 
+    The power-management is supported.
+
   Module snd-ens1371
   ------------------
 
@@ -526,6 +528,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards and autoprobe.
 
+    The power-management is supported.
+
   Module snd-es968
   ----------------
 
@@ -671,6 +675,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     model	- force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
+    single_cmd  - Use single immediate commands to communicate with
+		codecs (for debugging only)
 
     This module supports one card and autoprobe.
 
@@ -694,13 +700,34 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  asus		3-jack
 	  uniwill	3-jack
 	  F1734		2-jack
+	  lg		LG laptop (m1 express dual)
 	  test		for testing/debugging purpose, almost all controls can be
 			adjusted.  Appearing only when compiled with
 			$CONFIG_SND_DEBUG=y
+	  auto		auto-config reading BIOS (default)
 
 	ALC260
 	  hp		HP machines
 	  fujitsu	Fujitsu S7020
+	  acer		Acer TravelMate
+	  basic		fixed pin assignment (old default model)
+	  auto		auto-config reading BIOS (default)
+
+	ALC262
+	  fujitsu	Fujitsu Laptop
+	  basic		fixed pin assignment w/o SPDIF
+	  auto		auto-config reading BIOS (default)
+
+	ALC882/883/885
+	  3stack-dig	3-jack with SPDIF I/O
+	  6stck-dig	6-jack digital with SPDIF I/O
+	  auto		auto-config reading BIOS (default)
+
+	ALC861
+	  3stack	3-jack
+	  3stack-dig	3-jack with SPDIF I/O
+	  6stack-dig	6-jack with SPDIF I/O
+	  auto		auto-config reading BIOS (default)
 
 	CMI9880
 	  minimal	3-jack in back
@@ -710,6 +737,28 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  allout	5-jack in back, 2-jack in front, SPDIF out
 	  auto		auto-config reading BIOS (default)
 
+	AD1981
+	  basic		3-jack (default)
+	  hp		HP nx6320
+
+	AD1986A
+	  6stack	6-jack, separate surrounds (default)
+	  3stack	3-stack, shared surrounds
+	  laptop	2-channel only (FSC V2060, Samsung M50)
+	  laptop-eapd	2-channel with EAPD (Samsung R65, ASUS A6J)
+
+	AD1988
+	  6stack	6-jack
+	  6stack-dig	ditto with SPDIF
+	  3stack	3-jack
+	  3stack-dig	ditto with SPDIF
+	  laptop	3-jack with hp-jack automute
+	  laptop-dig	ditto with SPDIF
+	  auto		auto-confgi reading BIOS (default)
+
+	STAC7661(?)
+	  vaio		Setup for VAIO FE550G/SZ110
+
     If the default configuration doesn't work and one of the above
     matches with your device, report it together with the PCI
     subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
@@ -723,6 +772,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	    (Usually SD_LPLIB register is more accurate than the
 	    position buffer.)
 
+    NB: If you get many "azx_get_response timeout" messages at
+    loading, it's likely a problem of interrupts (e.g. ACPI irq
+    routing).  Try to boot with options like "pci=noacpi".  Also, you
+    can try "single_cmd=1" module option.  This will switch the
+    communication method between HDA controller and codecs to the
+    single immediate commands instead of CORB/RIRB.  Basically, the
+    single command mode is provided only for BIOS, and you won't get
+    unsolicited events, too.  But, at least, this works independently
+    from the irq.  Remember this is a last resort, and should be
+    avoided as much as possible...
+
     The power-management is supported.
 
   Module snd-hdsp
@@ -802,6 +862,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   ------------------
 
     Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
+			* MidiMan M Audio Revolution 5.1
 			* MidiMan M Audio Revolution 7.1
 			* AMP Ltd AUDIO2000
 			* TerraTec Aureon 5.1 Sky
@@ -810,6 +871,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 			* TerraTec Phase 22
 			* TerraTec Phase 28
 			* AudioTrak Prodigy 7.1
+			* AudioTrak Prodigy 7.1LT
 			* AudioTrak Prodigy 192
 			* Pontis MS300
 			* Albatron K8X800 Pro II 
@@ -820,9 +882,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 			* Shuttle SN25P
 
     model       - Use the given board model, one of the following:
-		  revo71, amp2000, prodigy71, prodigy192, aureon51,
-		  aureon71, universe, k8x800, phase22, phase28, ms300,
-		  av710
+		  revo51, revo71, amp2000, prodigy71, prodigy71lt,
+		  prodigy192, aureon51, aureon71, universe,
+		  k8x800, phase22, phase28, ms300, av710
 
     This module supports multiple cards and autoprobe.
 
@@ -1353,6 +1415,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     vid             - Vendor ID for the device (optional)
     pid             - Product ID for the device (optional)
+    device_setup    - Device specific magic number (optional)
+                    - Influence depends on the device
+                    - Default: 0x0000 
 
     This module supports multiple devices, autoprobe and hotplugging.