---

yaml
---
r: 347503
b: refs/heads/master
c: 37683e4
h: refs/heads/master
i:
  347501: 809d6d9
  347499: 3e744ad
  347495: 50375b5
  347487: 46e1a55
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ea2447f700cab264019b52e2b417d689e052dcfd
+refs/heads/master: 37683e45623a0ccd34761c71aad618cc129fe35c

trunk/CREDITS

@@ -1823,6 +1823,11 @@ S: Kattreinstr 38
 S: D-64295
 S: Germany
 
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de

trunk/Documentation/devicetree/bindings/net/mdio-gpio.txt

@@ -8,9 +8,16 @@ gpios property as described in section VIII.1 in the following order:
 
 MDC, MDIO.
 
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
 Example:
 
-mdio {
+aliases {
+	mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
 	compatible = "virtual,mdio-gpio";
 	#address-cells = <1>;
 	#size-cells = <0>;

trunk/Documentation/networking/vxlan.txt

@@ -32,7 +32,7 @@ no entry is in the forwarding table.
   # ip link delete vxlan0
 
 3. Show vxlan info
-  # ip -d show vxlan0
+  # ip -d link show vxlan0
 
 It is possible to create, destroy and display the vxlan
 forwarding table using the new bridge command.
@@ -41,7 +41,7 @@ forwarding table using the new bridge command.
   # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
 
 2. Delete forwarding table entry
-  # bridge fdb delete 00:17:42:8a:b4:05
+  # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
 
 3. Show forwarding table
   # bridge fdb show dev vxlan0

trunk/MAINTAINERS

@@ -526,17 +526,17 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-M:	Joerg Roedel <joerg.roedel@amd.com>
+M:	Joerg Roedel <joro@8bytes.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S:	Supported
+S:	Maintained
 F:	drivers/iommu/amd_iommu*.[ch]
 F:	include/linux/amd-iommu.h
 
 AMD MICROCODE UPDATE SUPPORT
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	amd64-microcode@amd64.org
-S:	Supported
+S:	Maintained
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
@@ -841,6 +841,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/IGEP MACHINE SUPPORT
+M:	Enric Balletbo i Serra <eballetbo@gmail.com>
+M:	Javier Martinez Canillas <javier@dowhile0.org>
+L:	linux-omap@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-omap2/board-igep0020.c
+
 ARM/INCOME PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2708,10 +2716,10 @@ F:	include/linux/edac.h
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
-M:	Borislav Petkov <borislav.petkov@amd.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
@@ -3753,7 +3761,7 @@ S:	Maintained
 F:	drivers/platform/x86/ideapad-laptop.c
 
 IDE/ATAPI DRIVERS
-M:	Borislav Petkov <petkovbb@gmail.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
@@ -4280,8 +4288,8 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Avi Kivity <avi@redhat.com>
 M:	Marcelo Tosatti <mtosatti@redhat.com>
+M:	Gleb Natapov <gleb@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -5413,7 +5421,7 @@ S:	Maintained
 F:	sound/drivers/opl4/
 
 OPROFILE
-M:	Robert Richter <robert.richter@amd.com>
+M:	Robert Richter <rric@kernel.org>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/include/asm/oprofile*.h
@@ -8198,7 +8206,7 @@ F:	drivers/platform/x86
 
 X86 MCE INFRASTRUCTURE
 M:	Tony Luck <tony.luck@intel.com>
-M:	Borislav Petkov <bp@amd64.org>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

trunk/arch/alpha/kernel/osf_sys.c

@@ -445,7 +445,7 @@ struct procfs_args {
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -465,7 +465,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
 }
 
 static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -485,7 +485,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
 }
 
 static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;
 

trunk/arch/arm/mach-davinci/dm644x.c

@@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
 		break;
 	case VPBE_ENC_CUSTOM_TIMINGS:
 		if (pclock <= 27000000) {
-			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-			     DM644X_VPSS_DACCLKEN;
+			v |= DM644X_VPSS_DACCLKEN;
 			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
 		} else {
 			/*

trunk/arch/arm/mach-exynos/dma.c

@@ -275,6 +275,9 @@ static int __init exynos_dma_init(void)
 		exynos_pdma1_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4210_pdma1_peri);
 		exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+		if (samsung_rev() == EXYNOS4210_REV_0)
+			exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
 	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		exynos_pdma0_pdata.nr_valid_peri =
 			ARRAY_SIZE(exynos4212_pdma0_peri);

trunk/arch/arm/mach-exynos/include/mach/map.h

@@ -90,6 +90,7 @@
 
 #define EXYNOS4_PA_MDMA0		0x10810000
 #define EXYNOS4_PA_MDMA1		0x12850000
+#define EXYNOS4_PA_S_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
 #define EXYNOS5_PA_MDMA0		0x10800000

trunk/arch/arm/mach-omap2/board-igep0020.c

@@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void)
 	} else
 		return;
 
+	/* Make sure that the GPIO pins are muxed correctly */
+	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
 	err = gpio_request_array(igep_wlan_bt_gpios,
 				 ARRAY_SIZE(igep_wlan_bt_gpios));
 	if (err) {

trunk/arch/arm/mach-omap2/common-board-devices.c

@@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
-	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-	if (err) {
-		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-		return;
-	}
+	/*
+	 * If a board defines get_pendown_state() function, request the pendown
+	 * GPIO and set the GPIO debounce time.
+	 * If a board does not define the get_pendown_state() function, then
+	 * the ads7846 driver will setup the pendown GPIO itself.
+	 */
+	if (board_pdata && board_pdata->get_pendown_state) {
+		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+		if (err) {
+			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+			return;
+		}
 
-	if (gpio_debounce)
-		gpio_set_debounce(gpio_pendown, gpio_debounce);
+		if (gpio_debounce)
+			gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+		gpio_export(gpio_pendown, 0);
+	}
 
 	spi_bi->bus_num	= bus_num;
 	spi_bi->irq	= gpio_to_irq(gpio_pendown);
 
+	ads7846_config.gpio_pendown = gpio_pendown;
+
 	if (board_pdata) {
 		board_pdata->gpio_pendown = gpio_pendown;
+		board_pdata->gpio_pendown_debounce = gpio_debounce;
 		spi_bi->platform_data = board_pdata;
-		if (board_pdata->get_pendown_state)
-			gpio_export(gpio_pendown, 0);
-	} else {
-		ads7846_config.gpio_pendown = gpio_pendown;
 	}
 
-	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-		gpio_free(gpio_pendown);
-
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else

trunk/arch/arm/mach-omap2/twl-common.c

@@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type,
 {
 	/* PMIC part*/
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+	omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
 	omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
 
 	/* Register additional devices on i2c1 bus if needed */

trunk/arch/arm/plat-omap/i2c.c

@@ -26,12 +26,14 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
 #include <plat/i2c.h>
+#include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 
 #define OMAP_I2C_SIZE		0x3f
@@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id)
 
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;
@@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id)
 	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
 	pdata->flags = dev_attr->flags;
 
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 * Only omap3 has support for constraints
+	 */
+	if (cpu_is_omap34xx())
+		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
 			NULL, 0, 0);

trunk/arch/m68k/include/asm/signal.h

@@ -41,15 +41,15 @@ struct k_sigaction {
 static inline void sigaddset(sigset_t *set, int _sig)
 {
 	asm ("bfset %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
 
 static inline void sigdelset(sigset_t *set, int _sig)
 {
 	asm ("bfclr %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -65,7 +65,7 @@ static inline int __gen_sigismember(sigset_t *set, int _sig)
 	int ret;
 	asm ("bfextu %1{%2,#1},%0"
 		: "=d" (ret)
-		: "od" (*set), "id" ((_sig-1) ^ 31)
+		: "o" (*set), "id" ((_sig-1) ^ 31)
 		: "cc");
 	return ret;
 }

trunk/arch/mips/kernel/setup.c

@@ -79,7 +79,7 @@ static struct resource data_resource = { .name = "Kernel data", };
 void __init add_memory_region(phys_t start, phys_t size, long type)
 {
 	int x = boot_mem_map.nr_map;
-	struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
+	int i;
 
 	/* Sanity check */
 	if (start + size < start) {
@@ -88,15 +88,29 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 	}
 
 	/*
-	 * Try to merge with previous entry if any.  This is far less than
-	 * perfect but is sufficient for most real world cases.
+	 * Try to merge with existing entry, if any.
 	 */
-	if (x && prev->addr + prev->size == start && prev->type == type) {
-		prev->size += size;
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+		unsigned long top;
+
+		if (entry->type != type)
+			continue;
+
+		if (start + size < entry->addr)
+			continue;			/* no overlap */
+
+		if (entry->addr + entry->size < start)
+			continue;			/* no overlap */
+
+		top = max(entry->addr + entry->size, start + size);
+		entry->addr = min(entry->addr, start);
+		entry->size = top - entry->addr;
+
 		return;
 	}
 
-	if (x == BOOT_MEM_MAP_MAX) {
+	if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
 		pr_err("Ooops! Too many entries in the memory map!\n");
 		return;
 	}