---

yaml
---
r: 296861
b: refs/heads/master
c: cc9a0f6
h: refs/heads/master
i:
  296859: a25baf5
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 801448e0672008acec050fbef3b8a7df7c5edcc1
+refs/heads/master: cc9a0f68d1f8b9bfd9c0c2ada13db64d63f63db3

trunk/drivers/mfd/db8500-prcmu.c

@@ -30,6 +30,7 @@
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
+#include <asm/hardware/gic.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
@@ -850,6 +851,38 @@ int db8500_prcmu_gic_recouple(void)
 	return 0;
 }
 
+#define PRCMU_GIC_NUMBER_REGS 5
+
+/*
+ * This function checks if there are pending irq on the gic. It only
+ * makes sense if the gic has been decoupled before with the
+ * db8500_prcmu_gic_decouple function. Disabling an interrupt only
+ * disables the forwarding of the interrupt to any CPU interface. It
+ * does not prevent the interrupt from changing state, for example
+ * becoming pending, or active and pending if it is already
+ * active. Hence, we have to check the interrupt is pending *and* is
+ * active.
+ */
+bool db8500_prcmu_gic_pending_irq(void)
+{
+	u32 pr; /* Pending register */
+	u32 er; /* Enable register */
+	void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
+	int i;
+
+        /* 5 registers. STI & PPI not skipped */
+	for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) {
+
+		pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4);
+		er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+		if (pr & er)
+			return true; /* There is a pending interrupt */
+	}
+
+	return false;
+}
+
 /* This function should only be called while mb0_transfer.lock is held. */
 static void config_wakeups(void)
 {

trunk/include/linux/mfd/db8500-prcmu.h

@@ -582,6 +582,7 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
 u8 db8500_prcmu_get_power_state_result(void);
 int db8500_prcmu_gic_decouple(void);
 int db8500_prcmu_gic_recouple(void);
+bool db8500_prcmu_gic_pending_irq(void);
 void db8500_prcmu_enable_wakeups(u32 wakeups);
 int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
 int db8500_prcmu_request_clock(u8 clock, bool enable);

trunk/include/linux/mfd/dbx500-prcmu.h

@@ -297,6 +297,14 @@ static inline int prcmu_gic_recouple(void)
 		return db8500_prcmu_gic_recouple();
 }
 
+static inline bool prcmu_gic_pending_irq(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_pending_irq();
+}
+
 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
 	if (cpu_is_u5500())