Merge nfs containerization work from Trond's tree

The nfs containerization work is a prerequisite for Jeff Layton's reboot
recovery rework.

Documentation/DocBook/device-drivers.tmpl

@@ -102,9 +102,12 @@ X!Iinclude/linux/kobject.h
 !Iinclude/linux/device.h
      </sect1>
      <sect1><title>Device Drivers Base</title>
+!Idrivers/base/init.c
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
+!Edrivers/base/syscore.c
 !Edrivers/base/class.c
+!Idrivers/base/node.c
 !Edrivers/base/firmware_class.c
 !Edrivers/base/transport_class.c
 <!-- Cannot be included, because
@@ -113,13 +116,18 @@ X!Iinclude/linux/kobject.h
      exceed allowed 44 characters maximum
 X!Edrivers/base/attribute_container.c
 -->
-!Edrivers/base/sys.c
+!Edrivers/base/dd.c
 <!--
 X!Edrivers/base/interface.c
 -->
 !Iinclude/linux/platform_device.h
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
      </sect1>
      <sect1><title>Device Drivers Power Management</title>
 !Edrivers/base/power/main.c
@@ -219,7 +227,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/tty/serial/8250/8250.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/filesystems/nfs/idmapper.txt

@@ -4,13 +4,21 @@ ID Mapper
 =========
 Id mapper is used by NFS to translate user and group ids into names, and to
 translate user and group names into ids.  Part of this translation involves
-performing an upcall to userspace to request the information.  Id mapper will
-user request-key to perform this upcall and cache the result.  The program
-/usr/sbin/nfs.idmap should be called by request-key, and will perform the
-translation and initialize a key with the resulting information.
+performing an upcall to userspace to request the information.  There are two
+ways NFS could obtain this information: placing a call to /sbin/request-key
+or by placing a call to the rpc.idmap daemon.
+
+NFS will attempt to call /sbin/request-key first.  If this succeeds, the
+result will be cached using the generic request-key cache.  This call should
+only fail if /etc/request-key.conf is not configured for the id_resolver key
+type, see the "Configuring" section below if you wish to use the request-key
+method.
+
+If the call to /sbin/request-key fails (if /etc/request-key.conf is not
+configured with the id_resolver key type), then the idmapper will ask the
+legacy rpc.idmap daemon for the id mapping.  This result will be stored
+in a custom NFS idmap cache.
 
- NFS_USE_NEW_IDMAPPER must be selected when configuring the kernel to use this
- feature.
 
 ===========
 Configuring

Documentation/filesystems/nfs/pnfs.txt

@@ -53,3 +53,57 @@ lseg maintains an extra reference corresponding to the NFS_LSEG_VALID
 bit which holds it in the pnfs_layout_hdr's list.  When the final lseg
 is removed from the pnfs_layout_hdr's list, the NFS_LAYOUT_DESTROYED
 bit is set, preventing any new lsegs from being added.
+
+layout drivers
+--------------
+
+PNFS utilizes what is called layout drivers. The STD defines 3 basic
+layout types: "files" "objects" and "blocks". For each of these types
+there is a layout-driver with a common function-vectors table which
+are called by the nfs-client pnfs-core to implement the different layout
+types.
+
+Files-layout-driver code is in: fs/nfs/nfs4filelayout.c && nfs4filelayoutdev.c
+Objects-layout-deriver code is in: fs/nfs/objlayout/.. directory
+Blocks-layout-deriver code is in: fs/nfs/blocklayout/.. directory
+
+objects-layout setup
+--------------------
+
+As part of the full STD implementation the objlayoutdriver.ko needs, at times,
+to automatically login to yet undiscovered iscsi/osd devices. For this the
+driver makes up-calles to a user-mode script called *osd_login*
+
+The path_name of the script to use is by default:
+	/sbin/osd_login.
+This name can be overridden by the Kernel module parameter:
+	objlayoutdriver.osd_login_prog
+
+If Kernel does not find the osd_login_prog path it will zero it out
+and will not attempt farther logins. An admin can then write new value
+to the objlayoutdriver.osd_login_prog Kernel parameter to re-enable it.
+
+The /sbin/osd_login is part of the nfs-utils package, and should usually
+be installed on distributions that support this Kernel version.
+
+The API to the login script is as follows:
+	Usage: $0 -u <URI> -o <OSDNAME> -s <SYSTEMID>
+	Options:
+		-u		target uri e.g. iscsi://<ip>:<port>
+				(allways exists)
+				(More protocols can be defined in the future.
+				 The client does not interpret this string it is
+				 passed unchanged as recieved from the Server)
+		-o		osdname of the requested target OSD
+				(Might be empty)
+				(A string which denotes the OSD name, there is a
+				 limit of 64 chars on this string)
+		-s 		systemid of the requested target OSD
+				(Might be empty)
+				(This string, if not empty is always an hex
+				 representation of the 20 bytes osd_system_id)
+
+blocks-layout setup
+-------------------
+
+TODO: Document the setup needs of the blocks layout driver

Documentation/kernel-parameters.txt

@@ -1657,6 +1657,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			of returning the full 64-bit number.
 			The default is to return 64-bit inode numbers.
 
+	nfs.max_session_slots=
+			[NFSv4.1] Sets the maximum number of session slots
+			the client will attempt to negotiate with the server.
+			This limits the number of simultaneous RPC requests
+			that the client can send to the NFSv4.1 server.
+			Note that there is little point in setting this
+			value higher than the max_tcp_slot_table_limit.
+
 	nfs.nfs4_disable_idmapping=
 			[NFSv4] When set to the default of '1', this option
 			ensures that both the RPC level authentication
@@ -1670,6 +1678,21 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			back to using the idmapper.
 			To turn off this behaviour, set the value to '0'.
 
+	nfs.send_implementation_id =
+			[NFSv4.1] Send client implementation identification
+			information in exchange_id requests.
+			If zero, no implementation identification information
+			will be sent.
+			The default is to send the implementation identification
+			information.
+
+
+	objlayoutdriver.osd_login_prog=
+			[NFS] [OBJLAYOUT] sets the pathname to the program which
+			is used to automatically discover and login into new
+			osd-targets. Please see:
+			Documentation/filesystems/pnfs.txt for more explanations
+
 	nmi_debug=	[KNL,AVR32,SH] Specify one or more actions to take
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]

MAINTAINERS

@@ -159,7 +159,7 @@ S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
@@ -1783,9 +1783,9 @@ X:	net/wireless/wext*
 
 CHAR and MISC DRIVERS
 M:	Arnd Bergmann <arnd@arndb.de>
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
-S:	Maintained
+S:	Supported
 F:	drivers/char/*
 F:	drivers/misc/*
 
@@ -2320,7 +2320,7 @@ F:	lib/lru_cache.c
 F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
@@ -6276,15 +6276,15 @@ S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org
-S:	Maintained
+S:	Supported
 
 STAGING SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 L:	devel@driverdev.osuosl.org
-S:	Maintained
+S:	Supported
 F:	drivers/staging/
 
 STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
@@ -6669,8 +6669,8 @@ S:	Maintained
 K:	^Subject:.*(?i)trivial
 
 TTY LAYER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
-S:	Maintained
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/tty/
 F:	drivers/tty/serial/serial_core.c
@@ -6958,7 +6958,7 @@ S:	Maintained
 F:	drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@@ -6973,9 +6973,8 @@ S:	Maintained
 F:	drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
-W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*
 
@@ -7003,7 +7002,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:	drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
@@ -7090,7 +7089,7 @@ F:	fs/hppfs/
 
 USERSPACE I/O (UIO)
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/

arch/microblaze/kernel/setup.c

@@ -26,7 +26,6 @@
 #include <linux/cache.h>
 #include <linux/of_platform.h>
 #include <linux/dma-mapping.h>
-#include <linux/cpu.h>
 #include <asm/cacheflush.h>
 #include <asm/entry.h>
 #include <asm/cpuinfo.h>
@@ -227,23 +226,5 @@ static int __init setup_bus_notifier(void)
 
 	return 0;
 }
-arch_initcall(setup_bus_notifier);
-
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
-static int __init topology_init(void)
-{
-	int i, ret;
-
-	for_each_present_cpu(i) {
-		struct cpu *c = &per_cpu(cpu_devices, i);
 
-		ret = register_cpu(c, i);
-		if (ret)
-			printk(KERN_WARNING "topology_init: register_cpu %d "
-						"failed (%d)\n", i, ret);
-	}
-
-	return 0;
-}
-subsys_initcall(topology_init);
+arch_initcall(setup_bus_notifier);

arch/sparc/Kconfig

@@ -33,6 +33,7 @@ config SPARC
 config SPARC32
 	def_bool !64BIT
 	select GENERIC_ATOMIC64
+	select CLZ_TAB
 
 config SPARC64
 	def_bool 64BIT

arch/sparc/lib/divdi3.S

@@ -17,23 +17,9 @@ along with GNU CC; see the file COPYING.  If not, write to
 the Free Software Foundation, 59 Temple Place - Suite 330,
 Boston, MA 02111-1307, USA.  */
 
-	.data
-	.align 8
-	.globl	__clz_tab
-__clz_tab:
-	.byte	0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5
-	.byte	6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6
-	.byte	7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
-	.byte	7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
-	.byte	8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
-	.byte	8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
-	.byte	8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
-	.byte	8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
-	.size	 __clz_tab,256
-	.global .udiv
-
 	.text
 	.align 4
+	.global .udiv
 	.globl __divdi3
 __divdi3:
 	save %sp,-104,%sp

arch/x86/include/asm/cmpxchg.h

@@ -145,13 +145,13 @@ extern void __add_wrong_size(void)
 
 #ifdef __HAVE_ARCH_CMPXCHG
 #define cmpxchg(ptr, old, new)						\
-	__cmpxchg((ptr), (old), (new), sizeof(*ptr))
+	__cmpxchg(ptr, old, new, sizeof(*(ptr)))
 
 #define sync_cmpxchg(ptr, old, new)					\
-	__sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+	__sync_cmpxchg(ptr, old, new, sizeof(*(ptr)))
 
 #define cmpxchg_local(ptr, old, new)					\
-	__cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
+	__cmpxchg_local(ptr, old, new, sizeof(*(ptr)))
 #endif
 
 /*

arch/x86/kernel/dumpstack.c

@@ -252,7 +252,8 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 	unsigned short ss;
 	unsigned long sp;
 #endif
-	printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
+	printk(KERN_DEFAULT
+	       "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
 #ifdef CONFIG_PREEMPT
 	printk("PREEMPT ");
 #endif

arch/x86/kernel/dumpstack_64.c

@@ -129,7 +129,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 	if (!stack) {
 		if (regs)
 			stack = (unsigned long *)regs->sp;
-		else if (task && task != current)
+		else if (task != current)
 			stack = (unsigned long *)task->thread.sp;
 		else
 			stack = &dummy;
@@ -269,11 +269,11 @@ void show_registers(struct pt_regs *regs)
 		unsigned char c;
 		u8 *ip;
 
-		printk(KERN_EMERG "Stack:\n");
+		printk(KERN_DEFAULT "Stack:\n");
 		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
-				   0, KERN_EMERG);
+				   0, KERN_DEFAULT);
 
-		printk(KERN_EMERG "Code: ");
+		printk(KERN_DEFAULT "Code: ");
 
 		ip = (u8 *)regs->ip - code_prologue;
 		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {