Pull kconfig into release branch

arch/i386/kernel/acpi/Makefile

@@ -2,7 +2,7 @@ obj-$(CONFIG_ACPI)		+= boot.o
 ifneq ($(CONFIG_PCI),)
 obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
 endif
-obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
+obj-$(CONFIG_ACPI)		+= sleep.o wakeup.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y				+= cstate.o processor.o

arch/i386/kernel/setup.c

@@ -422,7 +422,7 @@ void __init setup_bootmem_allocator(void)
 	 */
 	reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
 #endif
-#ifdef CONFIG_ACPI_SLEEP
+#ifdef CONFIG_ACPI
 	/*
 	 * Reserve low memory region for sleep support.
 	 */

arch/i386/mm/init.c

@@ -432,7 +432,7 @@ static void __init pagetable_init (void)
 	paravirt_pagetable_setup_done(pgd_base);
 }
 
-#if defined(CONFIG_SOFTWARE_SUSPEND) || defined(CONFIG_ACPI_SLEEP)
+#if defined(CONFIG_SOFTWARE_SUSPEND) || defined(CONFIG_ACPI)
 /*
  * Swap suspend & friends need this for resume because things like the intel-agp
  * driver might have split up a kernel 4MB mapping.

arch/ia64/kernel/acpi.c

@@ -67,6 +67,8 @@ EXPORT_SYMBOL(pm_power_off);
 unsigned int acpi_cpei_override;
 unsigned int acpi_cpei_phys_cpuid;
 
+unsigned long acpi_wakeup_address = 0;
+
 const char __init *
 acpi_get_sysname(void)
 {
@@ -986,4 +988,21 @@ int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
 
 EXPORT_SYMBOL(acpi_unregister_ioapic);
 
+/*
+ * acpi_save_state_mem() - save kernel state
+ *
+ * TBD when when IA64 starts to support suspend...
+ */
+int acpi_save_state_mem(void) { return 0; } 
+
+/*
+ * acpi_restore_state()
+ */
+void acpi_restore_state_mem(void) {}
+
+/*
+ * do_suspend_lowlevel()
+ */
+void do_suspend_lowlevel(void) {}
+
 #endif				/* CONFIG_ACPI */

arch/x86_64/kernel/acpi/Makefile

@@ -1,6 +1,6 @@
 obj-y			:= boot.o
 boot-y			:= ../../../i386/kernel/acpi/boot.o
-obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
+obj-y			+= sleep.o wakeup.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y			+= processor.o

arch/x86_64/kernel/acpi/sleep.c

@@ -51,8 +51,6 @@
                               Low-Level Sleep Support
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_SLEEP
-
 /* address in low memory of the wakeup routine. */
 unsigned long acpi_wakeup_address = 0;
 unsigned long acpi_realmode_flags;
@@ -117,8 +115,6 @@ static int __init acpi_sleep_setup(char *str)
 
 __setup("acpi_sleep=", acpi_sleep_setup);
 
-#endif				/*CONFIG_ACPI_SLEEP */
-
 void acpi_pci_link_exit(void)
 {
 }

arch/x86_64/kernel/head.S

@@ -120,7 +120,7 @@ ident_complete:
 	addq	%rbp, trampoline_level4_pgt + 0(%rip)
 	addq	%rbp, trampoline_level4_pgt + (511*8)(%rip)
 #endif
-#ifdef CONFIG_ACPI_SLEEP
+#ifdef CONFIG_ACPI
 	addq	%rbp, wakeup_level4_pgt + 0(%rip)
 	addq	%rbp, wakeup_level4_pgt + (511*8)(%rip)
 #endif

arch/x86_64/kernel/setup.c

@@ -333,7 +333,7 @@ void __init setup_arch(char **cmdline_p)
 	reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE);
 #endif
 
-#ifdef CONFIG_ACPI_SLEEP
+#ifdef CONFIG_ACPI
        /*
         * Reserve low memory region for sleep support.
         */

drivers/acpi/Kconfig

@@ -11,6 +11,9 @@ menuconfig ACPI
 	depends on PCI
 	depends on PM
 	select PNP
+	# for sleep
+	select HOTPLUG_CPU if X86 && SMP
+	select SUSPEND_SMP if X86 && SMP
 	default y
 	---help---
 	  Advanced Configuration and Power Interface (ACPI) support for 
@@ -42,51 +45,26 @@ menuconfig ACPI
 
 if ACPI
 
-config ACPI_SLEEP
-	bool "Sleep States"
-	depends on X86 && (!SMP || SUSPEND_SMP)
-	default y
-	---help---
-	  This option adds support for ACPI suspend states. 
-
-	  With this option, you will be able to put the system "to sleep". 
-	  Sleep states are low power states for the system and devices. All
-	  of the system operating state is saved to either memory or disk
-	  (depending on the state), to allow the system to resume operation
-	  quickly at your request.
-
-	  Although this option sounds really nifty, barely any of the device
-	  drivers have been converted to the new driver model and hence few
-	  have proper power management support. 
-
-	  This option is not recommended for anyone except those doing driver
-	  power management development.
-
-config ACPI_SLEEP_PROC_FS
-	bool
-	depends on ACPI_SLEEP && PROC_FS
-	default y
-
-config ACPI_SLEEP_PROC_SLEEP
-	bool "/proc/acpi/sleep (deprecated)"
-	depends on ACPI_SLEEP_PROC_FS
-	default n
-	---help---
-	  Create /proc/acpi/sleep
-	  Deprecated by /sys/power/state
-
 config ACPI_PROCFS
-	bool "Procfs interface (deprecated)"
-	default y
+	bool "Deprecated /proc/acpi files"
+	depends on PROC_FS
 	---help---
-	  The Procfs interface for ACPI is made optional for backward compatibility.
-	  As the same functions are duplicated in the sysfs interface
-	  and this proc interface will be removed some time later,
-	  it's marked as deprecated.
-	  ( /proc/acpi/debug_layer && debug_level are deprecated by
-	    /sys/module/acpi/parameters/debug_layer && debug_level.
-	    /proc/acpi/info is deprecated by
-	    /sys/module/acpi/parameters/acpica_version )
+	  For backwards compatibility, this option allows
+	  depricated /proc/acpi/ files to exist, even when
+	  they have been replaced by functions in /sys.
+	  The deprecated files (and their replacements) include:
+
+	  /proc/acpi/sleep (/sys/power/state)
+	  /proc/acpi/info (/sys/modules/acpi/parameters/acpica_version)
+	  /proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
+	  /proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
+	  /proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
+	  /proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
+
+	  This option has no effect on /proc/acpi/ files
+	  and functions which do not yet exist in /sys.
+
+	  Say N to delete /proc/acpi/ files that have moved to /sys/
 
 config ACPI_AC
 	tristate "AC Adapter"

drivers/acpi/sleep/Makefile

@@ -1,5 +1,5 @@
 obj-y					:= poweroff.o wakeup.o
-obj-$(CONFIG_ACPI_SLEEP)		+= main.o
-obj-$(CONFIG_ACPI_SLEEP_PROC_FS)	+= proc.o
+obj-y					+= main.o
+obj-$(CONFIG_X86)			+= proc.o
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/sleep/main.c

@@ -136,10 +136,12 @@ static int acpi_pm_finish(suspend_state_t pm_state)
 	/* reset firmware waking vector */
 	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 
+#ifdef CONFIG_X86
 	if (init_8259A_after_S1) {
 		printk("Broken toshiba laptop -> kicking interrupts\n");
 		init_8259A(0);
 	}
+#endif
 	return 0;
 }
 

drivers/acpi/sleep/poweroff.c

@@ -18,7 +18,6 @@
 
 int acpi_sleep_prepare(u32 acpi_state)
 {
-#ifdef CONFIG_ACPI_SLEEP
 	/* do we have a wakeup address for S2 and S3? */
 	if (acpi_state == ACPI_STATE_S3) {
 		if (!acpi_wakeup_address) {
@@ -31,7 +30,6 @@ int acpi_sleep_prepare(u32 acpi_state)
 	}
 	ACPI_FLUSH_CPU_CACHE();
 	acpi_enable_wakeup_device_prep(acpi_state);
-#endif
 	acpi_gpe_sleep_prepare(acpi_state);
 	acpi_enter_sleep_state_prep(acpi_state);
 	return 0;

drivers/acpi/sleep/proc.c

@@ -14,8 +14,16 @@
 #include "sleep.h"
 
 #define _COMPONENT		ACPI_SYSTEM_COMPONENT
+
+/*
+ * this file provides support for:
+ * /proc/acpi/sleep
+ * /proc/acpi/alarm
+ * /proc/acpi/wakeup
+ */
+
 ACPI_MODULE_NAME("sleep")
-#ifdef	CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset)
 {
 	int i;
@@ -68,7 +76,7 @@ acpi_system_write_sleep(struct file *file,
       Done:
 	return error ? error : count;
 }
-#endif				/* CONFIG_ACPI_SLEEP_PROC_SLEEP */
+#endif				/* CONFIG_ACPI_PROCFS */
 
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
 /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
@@ -463,15 +471,15 @@ static const struct file_operations acpi_system_wakeup_device_fops = {
 	.release = single_release,
 };
 
-#ifdef	CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 static const struct file_operations acpi_system_sleep_fops = {
 	.open = acpi_system_sleep_open_fs,
 	.read = seq_read,
 	.write = acpi_system_write_sleep,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
-#endif				/* CONFIG_ACPI_SLEEP_PROC_SLEEP */
+#endif				/* CONFIG_ACPI_PROCFS */
 
 #ifdef	HAVE_ACPI_LEGACY_ALARM
 static const struct file_operations acpi_system_alarm_fops = {
@@ -498,14 +506,14 @@ static int __init acpi_sleep_proc_init(void)
 	if (acpi_disabled)
 		return 0;
 
-#ifdef	CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 	/* 'sleep' [R/W] */
 	entry =
 	    create_proc_entry("sleep", S_IFREG | S_IRUGO | S_IWUSR,
 			      acpi_root_dir);
 	if (entry)
 		entry->proc_fops = &acpi_system_sleep_fops;
-#endif
+#endif				/* CONFIG_ACPI_PROCFS */
 
 #ifdef	HAVE_ACPI_LEGACY_ALARM
 	/* 'alarm' [R/W] */

drivers/acpi/sleep/wakeup.c

@@ -17,7 +17,6 @@ ACPI_MODULE_NAME("wakeup_devices")
 extern struct list_head acpi_wakeup_device_list;
 extern spinlock_t acpi_device_lock;
 
-#ifdef CONFIG_ACPI_SLEEP
 /**
  * acpi_enable_wakeup_device_prep - prepare wakeup devices
  *	@sleep_state:	ACPI state
@@ -180,7 +179,6 @@ static int __init acpi_wakeup_device_init(void)
 }
 
 late_initcall(acpi_wakeup_device_init);
-#endif
 
 /*
  * Disable all wakeup GPEs before entering requested sleep state.

include/acpi/acpi_drivers.h

@@ -142,10 +142,6 @@ static inline void unregister_hotplug_dock_device(acpi_handle handle)
 /*--------------------------------------------------------------------------
                                   Suspend/Resume
   -------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_SLEEP
 extern int acpi_sleep_init(void);
-#else
-#define acpi_sleep_init() do {} while (0)
-#endif
 
 #endif /*__ACPI_DRIVERS_H__*/

include/asm-i386/acpi.h

@@ -121,19 +121,6 @@ static inline void acpi_disable_pci(void)
 }
 extern int acpi_irq_balance_set(char *str);
 
-#else	/* !CONFIG_ACPI */
-
-#define acpi_lapic 0
-#define acpi_ioapic 0
-static inline void acpi_noirq_set(void) { }
-static inline void acpi_disable_pci(void) { }
-static inline void disable_acpi(void) { }
-
-#endif	/* !CONFIG_ACPI */
-
-
-#ifdef CONFIG_ACPI_SLEEP
-
 /* routines for saving/restoring kernel state */
 extern int acpi_save_state_mem(void);
 extern void acpi_restore_state_mem(void);
@@ -143,7 +130,15 @@ extern unsigned long acpi_wakeup_address;
 /* early initialization routine */
 extern void acpi_reserve_bootmem(void);
 
-#endif /*CONFIG_ACPI_SLEEP*/
+#else	/* !CONFIG_ACPI */
+
+#define acpi_lapic 0
+#define acpi_ioapic 0
+static inline void acpi_noirq_set(void) { }
+static inline void acpi_disable_pci(void) { }
+static inline void disable_acpi(void) { }
+
+#endif	/* !CONFIG_ACPI */
 
 #define ARCH_HAS_POWER_INIT	1
 

include/asm-i386/suspend.h

@@ -21,7 +21,7 @@ struct saved_context {
 	unsigned long return_address;
 } __attribute__((packed));
 
-#ifdef CONFIG_ACPI_SLEEP
+#ifdef CONFIG_ACPI
 extern unsigned long saved_eip;
 extern unsigned long saved_esp;
 extern unsigned long saved_ebp;

include/asm-ia64/acpi.h

@@ -100,6 +100,11 @@ const char *acpi_get_sysname (void);
 int acpi_request_vector (u32 int_type);
 int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
 
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+extern unsigned long acpi_wakeup_address;
+
 /*
  * Record the cpei override flag and current logical cpu. This is
  * useful for CPU removal.