---

yaml
---
r: 355517
b: refs/heads/master
c: 6ed05a2
h: refs/heads/master
i:
  355515: 7e75272
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 45e9d77a22b7b25373c7b8c0ea0b146168025360
+refs/heads/master: 6ed05a2aab3763b58922247543d7079106b254dc

trunk/Documentation/devicetree/bindings/arm/sirf.txt

@@ -1,3 +1,9 @@
-prima2 "cb" evaluation board
+CSR SiRFprimaII and SiRFmarco device tree bindings.
+========================================
+
 Required root node properties:
-    - compatible = "sirf,prima2-cb", "sirf,prima2";
+    - compatible:
+    - "sirf,prima2-cb" : prima2 "cb" evaluation board
+    - "sirf,marco-cb" : marco "cb" evaluation board
+    - "sirf,prima2" : prima2 device based board
+    - "sirf,marco" : marco device based board

trunk/Documentation/devicetree/bindings/arm/vt8500.txt

@@ -12,3 +12,11 @@ compatible = "wm,wm8505";
 Boards with the Wondermedia WM8650 SoC shall have the following properties:
 Required root node property:
 compatible = "wm,wm8650";
+
+Boards with the Wondermedia WM8750 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8750";
+
+Boards with the Wondermedia WM8850 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8850";

trunk/Documentation/devicetree/bindings/clock/imx31-clock.txt

@@ -0,0 +1,91 @@
+* Clock bindings for Freescale i.MX31
+
+Required properties:
+- compatible: Should be "fsl,imx31-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX31
+clocks and IDs.
+
+	Clock		    ID
+	-----------------------
+	dummy	             0
+	ckih                 1
+	ckil                 2
+	mpll                 3
+	spll                 4
+	upll                 5
+	mcu_main             6
+	hsp                  7
+	ahb                  8
+	nfc                  9
+	ipg                  10
+	per_div              11
+	per                  12
+	csi_sel              13
+	fir_sel              14
+	csi_div              15
+	usb_div_pre          16
+	usb_div_post         17
+	fir_div_pre          18
+	fir_div_post         19
+	sdhc1_gate           20
+	sdhc2_gate           21
+	gpt_gate             22
+	epit1_gate           23
+	epit2_gate           24
+	iim_gate             25
+	ata_gate             26
+	sdma_gate            27
+	cspi3_gate           28
+	rng_gate             29
+	uart1_gate           30
+	uart2_gate           31
+	ssi1_gate            32
+	i2c1_gate            33
+	i2c2_gate            34
+	i2c3_gate            35
+	hantro_gate          36
+	mstick1_gate         37
+	mstick2_gate         38
+	csi_gate             39
+	rtc_gate             40
+	wdog_gate            41
+	pwm_gate             42
+	sim_gate             43
+	ect_gate             44
+	usb_gate             45
+	kpp_gate             46
+	ipu_gate             47
+	uart3_gate           48
+	uart4_gate           49
+	uart5_gate           50
+	owire_gate           51
+	ssi2_gate            52
+	cspi1_gate           53
+	cspi2_gate           54
+	gacc_gate            55
+	emi_gate             56
+	rtic_gate            57
+	firi_gate            58
+
+Examples:
+
+clks: ccm@53f80000{
+	compatible = "fsl,imx31-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <0 31 0x04 0 53 0x04>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@43f90000 {
+	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+	reg = <0x43f90000 0x4000>;
+	interrupts = <45>;
+	clocks = <&clks 10>, <&clks 30>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};

trunk/MAINTAINERS

@@ -4209,6 +4209,7 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
+F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>

trunk/arch/arm/Kconfig

@@ -393,6 +393,7 @@ config ARCH_GEMINI
 config ARCH_SIRF
 	bool "CSR SiRF"
 	select ARCH_REQUIRE_GPIOLIB
+	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
@@ -949,22 +950,6 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
-config ARCH_VT8500_SINGLE
-	bool "VIA/WonderMedia 85xx"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select COMMON_CLK
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
-
 endchoice
 
 menu "Multiple platform selection"

trunk/arch/arm/Kconfig.debug

@@ -386,6 +386,20 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
+	config DEBUG_SIRFPRIMA2_UART1
+		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
+		depends on ARCH_PRIMA2
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFprimaII devices.
+
+	config DEBUG_SIRFMARCO_UART1
+		bool "Kernel low-level debugging messages via SiRFmarco UART1"
+		depends on ARCH_MARCO
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFmarco devices.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -412,6 +426,13 @@ choice
 		  of the tiles using the RS1 memory map, including all new A-class
 		  core tiles, FPGA-based SMMs and software models.
 
+	config DEBUG_VT8500_UART0
+		bool "Use UART0 on VIA/Wondermedia SoCs"
+		depends on ARCH_VT8500
+		help
+		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
+		  devices, including VT8500, WM8505, WM8650 and WM8850.
+
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
 		depends on !ARCH_MULTIPLATFORM
@@ -506,6 +527,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
 		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "mach/debug-macro.S"

trunk/arch/arm/boot/dts/Makefile

@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb \
 	kirkwood-openblocks_a6.dtb
+dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
 	msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
@@ -151,7 +152,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 	xenvm-4.2.dtb
 dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 	wm8505-ref.dtb \
-	wm8650-mid.dtb
+	wm8650-mid.dtb \
+	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs

trunk/arch/arm/boot/dts/imx31.dtsi

@@ -45,19 +45,25 @@
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43f90000 0x4000>;
 				interrupts = <45>;
+				clocks = <&clks 10>, <&clks 30>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
 			uart2: serial@43f94000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43f94000 0x4000>;
 				interrupts = <32>;
+				clocks = <&clks 10>, <&clks 31>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
 			uart4: serial@43fb0000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43fb0000 0x4000>;
+				clocks = <&clks 10>, <&clks 49>;
+				clock-names = "ipg", "per";
 				interrupts = <46>;
 				status = "disabled";
 			};
@@ -66,6 +72,8 @@
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43fb4000 0x4000>;
 				interrupts = <47>;
+				clocks = <&clks 10>, <&clks 50>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 		};
@@ -81,8 +89,17 @@
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x5000c000 0x4000>;
 				interrupts = <18>;
+				clocks = <&clks 10>, <&clks 48>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
+
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <0 31 0x04 0 53 0x04>;
+				#clock-cells = <1>;
+			};
 		};
 	};
 };

trunk/arch/arm/boot/dts/marco-evb.dts

@@ -0,0 +1,54 @@
+/*
+ * DTS file for CSR SiRFmarco Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "marco.dtsi"
+
+/ {
+	model = "CSR SiRFmarco Evaluation Board";
+	compatible = "sirf,marco-cb", "sirf,marco";
+
+	memory {
+		reg = <0x40000000 0x60000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart1: uart@cc060000 {
+				status = "okay";
+			};
+			uart2: uart@cc070000 {
+				status = "okay";
+			};
+			i2c0: i2c@cc0e0000 {
+			      status = "okay";
+			      fpga-cpld@4d {
+				      compatible = "sirf,fpga-cpld";
+				      reg = <0x4d>;
+			      };
+			};
+			spi1: spi@cc170000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+				spi@0 {
+					compatible = "spidev";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+			pci-iobg {
+				sd0: sdhci@cd000000 {
+					bus-width = <8>;
+					status = "okay";
+				};
+			};
+		};
+	};
+};