---

yaml
---
r: 233582
b: refs/heads/master
c: 13d1ea9
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: be715140b5c3baf8ab6708060cfab80bef279d18
+refs/heads/master: 13d1ea9a20ed7d77f98c1622dcf9f3881649f6d7

trunk/arch/cris/kernel/vmlinux.lds.S

@@ -72,11 +72,6 @@ SECTIONS
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	.init.data : { INIT_DATA }
 	.init.setup : { INIT_SETUP(16) }
-#ifdef CONFIG_ETRAX_ARCH_V32
-	__start___param = .;
-	__param : { *(__param) }
-	__stop___param = .;
-#endif
 	.initcall.init : {
 		INIT_CALLS
 	}

trunk/drivers/i2c/busses/i2c-omap.c

@@ -847,11 +847,15 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			dev_err(dev->dev, "Arbitration lost\n");
 			err |= OMAP_I2C_STAT_AL;
 		}
+		/*
+		 * ProDB0017052: Clear ARDY bit twice
+		 */
 		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
 					OMAP_I2C_STAT_AL)) {
 			omap_i2c_ack_stat(dev, stat &
 				(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
-				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR |
+				OMAP_I2C_STAT_ARDY));
 			omap_i2c_complete_cmd(dev, err);
 			return IRQ_HANDLED;
 		}
@@ -1137,12 +1141,41 @@ omap_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_SUSPEND
+static int omap_i2c_suspend(struct device *dev)
+{
+	if (!pm_runtime_suspended(dev))
+		if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
+			dev->bus->pm->runtime_suspend(dev);
+
+	return 0;
+}
+
+static int omap_i2c_resume(struct device *dev)
+{
+	if (!pm_runtime_suspended(dev))
+		if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
+			dev->bus->pm->runtime_resume(dev);
+
+	return 0;
+}
+
+static struct dev_pm_ops omap_i2c_pm_ops = {
+	.suspend = omap_i2c_suspend,
+	.resume = omap_i2c_resume,
+};
+#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
+#else
+#define OMAP_I2C_PM_OPS NULL
+#endif
+
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
 	.remove		= omap_i2c_remove,
 	.driver		= {
 		.name	= "omap_i2c",
 		.owner	= THIS_MODULE,
+		.pm	= OMAP_I2C_PM_OPS,
 	},
 };
 

trunk/drivers/i2c/busses/i2c-stu300.c

@@ -942,7 +942,7 @@ stu300_probe(struct platform_device *pdev)
 	adap->owner = THIS_MODULE;
 	/* DDC class but actually often used for more generic I2C */
 	adap->class = I2C_CLASS_DDC;
-	strncpy(adap->name, "ST Microelectronics DDC I2C adapter",
+	strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
 		sizeof(adap->name));
 	adap->nr = bus_nr;
 	adap->algo = &stu300_algo;

trunk/drivers/usb/core/quirks.c

@@ -48,6 +48,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Samsung Android phone modem - ID conflict with SPH-I500 */
+	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -68,6 +72,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Keytouch QWERTY Panel keyboard */
+	{ USB_DEVICE(0x0926, 0x3333), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
 	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 

trunk/drivers/usb/musb/musb_core.h

@@ -488,6 +488,15 @@ struct musb {
 	unsigned		set_address:1;
 	unsigned		test_mode:1;
 	unsigned		softconnect:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+#endif
+
 	/*
 	 * FIXME: Remove this flag.
 	 *
@@ -501,14 +510,6 @@ struct musb {
 	 */
 	unsigned                double_buffer_not_ok:1 __deprecated;
 
-	u8			address;
-	u8			test_mode_nr;
-	u16			ackpend;		/* ep0 */
-	enum musb_g_ep0_state	ep0_state;
-	struct usb_gadget	g;			/* the gadget */
-	struct usb_gadget_driver *gadget_driver;	/* its driver */
-#endif
-
 	struct musb_hdrc_config	*config;
 
 #ifdef MUSB_CONFIG_PROC_FS

trunk/drivers/usb/musb/omap2430.c

@@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb)
 
 static int omap2430_musb_exit(struct musb *musb)
 {
+	del_timer_sync(&musb_idle_timer);
 
 	omap2430_low_level_exit(musb);
 	otg_put_transceiver(musb->xceiv);

trunk/drivers/usb/serial/sierra.c

@@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
        { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }

trunk/drivers/usb/serial/usb_wwan.c

@@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb)
 		    __func__, status, endpoint);
 	} else {
 		tty = tty_port_tty_get(&port->port);
-		if (urb->actual_length) {
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-		} else
-			dbg("%s: empty read urb received", __func__);
-		tty_kref_put(tty);
+		if (tty) {
+			if (urb->actual_length) {
+				tty_insert_flip_string(tty, data,
+						urb->actual_length);
+				tty_flip_buffer_push(tty);
+			} else
+				dbg("%s: empty read urb received", __func__);
+			tty_kref_put(tty);
+		}
 
 		/* Resubmit urb so we continue receiving */
 		if (status != -ESHUTDOWN) {

trunk/drivers/usb/serial/visor.c

@@ -27,6 +27,7 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
 #include "visor.h"
 
 /*
@@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial,
 
 	dbg("%s", __func__);
 
+	/*
+	 * some Samsung Android phones in modem mode have the same ID
+	 * as SPH-I500, but they are ACM devices, so dont bind to them
+	 */
+	if (id->idVendor == SAMSUNG_VENDOR_ID &&
+		id->idProduct == SAMSUNG_SPH_I500_ID &&
+		serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+		serial->dev->descriptor.bDeviceSubClass ==
+			USB_CDC_SUBCLASS_ACM)
+		return -ENODEV;
+
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
 		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);