Merge branch 'next/devel-samsung' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/kgene/linux-samsung into next/soc2

From Kukjin Kim:

This includes supporting legacy i2c controller and ARM down clock
support for exynos5 and small changes.

[olof: It contains a dependency on samsung/hdmi for HDMI DT bindings, for some reason.]

* 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Clock settings for SATA and SATA PHY
  ARM: EXYNOS: Add ARM down clock support
  ARM: EXYNOS: Fix i2c suspend/resume for legacy controller
  ARM: EXYNOS: Add aliases for i2c controller
  ARM: EXYNOS: Setup legacy i2c controller interrupts
  ARM: EXYNOS: removing exynos-drm device registration from non-dt platforms
  ARM: EXYNOS: add clocks for exynos5 hdmi
  ARM: dts: add device tree support for exynos5 hdmiddc
  ARM: dts: add device tree support for exynos5 hdmiphy
  ARM: dts: add device tree support for exynos5 mixer
  ARM: dts: add device tree support for exynos5 hdmi
  ARM: EXYNOS: Add dp clock support for EXYNOS5
  ARM: SAMSUNG: call clk_get_rate for debugfs rate files
  ARM: SAMSUNG: add clock_tree debugfs file in clock

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/drm/exynos/hdmi.txt

@@ -0,0 +1,22 @@
+Device-Tree bindings for drm hdmi driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmi".
+- reg: physical base address of the hdmi and length of memory mapped
+	region.
+- interrupts: interrupt number to the cpu.
+- hpd-gpio: following information about the hotplug gpio pin.
+	a) phandle of the gpio controller node.
+	b) pin number within the gpio controller.
+	c) pin function mode.
+	d) optional flags and pull up/down.
+	e) drive strength.
+
+Example:
+
+	hdmi {
+		compatible = "samsung,exynos5-hdmi";
+		reg = <0x14530000 0x100000>;
+		interrupts = <0 95 0>;
+		hpd-gpio = <&gpx3 7 0xf 1 3>;
+	};

Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt

@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiddc driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiddc".
+- reg: I2C address of the hdmiddc device.
+
+Example:
+
+	hdmiddc {
+		compatible = "samsung,exynos5-hdmiddc";
+		reg = <0x50>;
+	};

Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt

@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiphy driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiphy".
+- reg: I2C address of the hdmiphy device.
+
+Example:
+
+	hdmiphy {
+		compatible = "samsung,exynos5-hdmiphy";
+		reg = <0x38>;
+	};

Documentation/devicetree/bindings/drm/exynos/mixer.txt

@@ -0,0 +1,15 @@
+Device-Tree bindings for mixer driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-mixer".
+- reg: physical base address of the mixer and length of memory mapped
+	region.
+- interrupts: interrupt number to the cpu.
+
+Example:
+
+	mixer {
+		compatible = "samsung,exynos5-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+	};

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -56,7 +56,15 @@
 	};
 
 	i2c@12C80000 {
-		status = "disabled";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpa0 6 3 3 0>,
+			<&gpa0 7 3 3 0>;
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos5-hdmiddc";
+			reg = <0x50>;
+		};
 	};
 
 	i2c@12C90000 {
@@ -79,6 +87,16 @@
 		status = "disabled";
 	};
 
+	i2c@12CE0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+
+		hdmiphy@38 {
+			compatible = "samsung,exynos5-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
 	dwmmc_0: dwmmc0@12200000 {
 		num-slots = <1>;
 		supports-highspeed;
@@ -166,4 +184,8 @@
 	spi_2: spi@12d40000 {
 		status = "disabled";
 	};
+
+	hdmi {
+		hpd-gpio = <&gpx3 7 0xf 1 3>;
+	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -31,6 +31,15 @@
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
 		gsc3 = &gsc_3;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+		i2c8 = &i2c_8;
 	};
 
 	gic:interrupt-controller@10481000 {
@@ -92,70 +101,78 @@
 		interrupts = <0 54 0>;
 	};
 
-	i2c@12C60000 {
+	i2c_0: i2c@12C60000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
 		interrupts = <0 56 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 
-	i2c@12C70000 {
+	i2c_1: i2c@12C70000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C70000 0x100>;
 		interrupts = <0 57 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 
-	i2c@12C80000 {
+	i2c_2: i2c@12C80000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C80000 0x100>;
 		interrupts = <0 58 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 
-	i2c@12C90000 {
+	i2c_3: i2c@12C90000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C90000 0x100>;
 		interrupts = <0 59 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 
-	i2c@12CA0000 {
+	i2c_4: i2c@12CA0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CA0000 0x100>;
 		interrupts = <0 60 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 
-	i2c@12CB0000 {
+	i2c_5: i2c@12CB0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CB0000 0x100>;
 		interrupts = <0 61 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 
-	i2c@12CC0000 {
+	i2c_6: i2c@12CC0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CC0000 0x100>;
 		interrupts = <0 62 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 
-	i2c@12CD0000 {
+	i2c_7: i2c@12CD0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CD0000 0x100>;
 		interrupts = <0 63 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
 
+	i2c_8: i2c@12CE0000 {
+		compatible = "samsung,s3c2440-hdmiphy-i2c";
+		reg = <0x12CE0000 0x1000>;
+		interrupts = <0 64 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
 	spi_0: spi@12d20000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d20000 0x100>;
@@ -520,4 +537,16 @@
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
 	};
+
+	hdmi {
+		compatible = "samsung,exynos5-hdmi";
+		reg = <0x14530000 0x100000>;
+		interrupts = <0 95 0>;
+	};
+
+	mixer {
+		compatible = "samsung,exynos5-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+	};
 };

arch/arm/mach-exynos/Makefile

@@ -53,7 +53,6 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 obj-$(CONFIG_EXYNOS_DEV_DMA)		+= dma.o
 obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
-obj-$(CONFIG_EXYNOS_DEV_DRM)		+= dev-drm.o
 obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o
 
 obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o

arch/arm/mach-exynos/clock-exynos5.c

@@ -80,6 +80,8 @@ static struct sleep_save exynos5_clock_save[] = {
 	SAVE_ITEM(EXYNOS5_VPLL_CON0),
 	SAVE_ITEM(EXYNOS5_VPLL_CON1),
 	SAVE_ITEM(EXYNOS5_VPLL_CON2),
+	SAVE_ITEM(EXYNOS5_PWR_CTRL1),
+	SAVE_ITEM(EXYNOS5_PWR_CTRL2),
 };
 #endif
 
@@ -196,6 +198,11 @@ static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
 }
 
+static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk exynos5_clk_mout_apll = {
@@ -651,15 +658,20 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 15),
 	}, {
 		.name		= "sata",
-		.devname	= "ahci",
+		.devname	= "exynos5-sata",
+		.parent         = &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
-		.name		= "sata_phy",
+		.name		= "sata-phy",
+		.devname	= "exynos5-sata-phy",
+		.parent         = &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 24),
 	}, {
-		.name		= "sata_phy_i2c",
+		.name		= "i2c",
+		.devname	= "exynos5-sata-phy-i2c",
+		.parent         = &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 25),
 	}, {
@@ -669,14 +681,24 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "hdmi",
-		.devname	= "exynos4-hdmi",
+		.devname	= "exynos5-hdmi",
 		.enable		= exynos5_clk_ip_disp1_ctrl,
 		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "exynos5-hdmi",
+		.enable		= exynos5_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "mixer",
-		.devname	= "s5p-mixer",
+		.devname	= "exynos5-mixer",
 		.enable		= exynos5_clk_ip_disp1_ctrl,
 		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "dp",
+		.devname	= "exynos-dp",
+		.enable		= exynos5_clk_ip_disp1_ctrl,
+		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "jpeg",
 		.enable		= exynos5_clk_ip_gen_ctrl,
@@ -1224,6 +1246,16 @@ static struct clksrc_clk exynos5_clksrcs[] = {
 		.sources = &exynos5_clkset_aclk,
 		.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
 		.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "sclk_sata",
+			.devname	= "exynos5-sata",
+			.enable		= exynos5_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &exynos5_clkset_aclk,
+		.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 24, .size = 1 },
+		.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS0, .shift = 20, .size = 4 },
 	}, {
 		.clk	= {
 			.name		= "sclk_gscl_wrap",

arch/arm/mach-exynos/cpuidle.c

@@ -21,6 +21,7 @@
 #include <asm/suspend.h>
 #include <asm/unified.h>
 #include <asm/cpuidle.h>
+#include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
 #include <mach/pmu.h>
 
@@ -156,12 +157,47 @@ static int exynos4_enter_lowpower(struct cpuidle_device *dev,
 		return exynos4_enter_core0_aftr(dev, drv, new_index);
 }
 
+static void __init exynos5_core_down_clk(void)
+{
+	unsigned int tmp;
+
+	/*
+	 * Enable arm clock down (in idle) and set arm divider
+	 * ratios in WFI/WFE state.
+	 */
+	tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
+	      PWR_CTRL1_CORE1_DOWN_RATIO | \
+	      PWR_CTRL1_DIV2_DOWN_EN	 | \
+	      PWR_CTRL1_DIV1_DOWN_EN	 | \
+	      PWR_CTRL1_USE_CORE1_WFE	 | \
+	      PWR_CTRL1_USE_CORE0_WFE	 | \
+	      PWR_CTRL1_USE_CORE1_WFI	 | \
+	      PWR_CTRL1_USE_CORE0_WFI;
+	__raw_writel(tmp, EXYNOS5_PWR_CTRL1);
+
+	/*
+	 * Enable arm clock up (on exiting idle). Set arm divider
+	 * ratios when not in idle along with the standby duration
+	 * ratios.
+	 */
+	tmp = PWR_CTRL2_DIV2_UP_EN	 | \
+	      PWR_CTRL2_DIV1_UP_EN	 | \
+	      PWR_CTRL2_DUR_STANDBY2_VAL | \
+	      PWR_CTRL2_DUR_STANDBY1_VAL | \
+	      PWR_CTRL2_CORE2_UP_RATIO	 | \
+	      PWR_CTRL2_CORE1_UP_RATIO;
+	__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
+}
+
 static int __init exynos4_init_cpuidle(void)
 {
 	int i, max_cpuidle_state, cpu_id;
 	struct cpuidle_device *device;
 	struct cpuidle_driver *drv = &exynos4_idle_driver;
 
+	if (soc_is_exynos5250())
+		exynos5_core_down_clk();
+
 	/* Setup cpuidle driver */
 	drv->state_count = (sizeof(exynos4_cpuidle_set) /
 				       sizeof(struct cpuidle_state));