Merge branch 'for-2.6.36' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/broonie/sound-2.6 into topic/asoc

arch/arm/mach-kirkwood/common.c

@@ -25,6 +25,7 @@
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
+#include <plat/audio.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/mvsdio.h>
@@ -864,6 +865,42 @@ struct sys_timer kirkwood_timer = {
 	.init = kirkwood_timer_init,
 };
 
+/*****************************************************************************
+ * Audio
+ ****************************************************************************/
+static struct resource kirkwood_i2s_resources[] = {
+	[0] = {
+		.start  = AUDIO_PHYS_BASE,
+		.end    = AUDIO_PHYS_BASE + SZ_16K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_KIRKWOOD_I2S,
+		.end    = IRQ_KIRKWOOD_I2S,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
+	.dram        = &kirkwood_mbus_dram_info,
+	.burst       = 128,
+};
+
+static struct platform_device kirkwood_i2s_device = {
+	.name		= "kirkwood-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_i2s_resources),
+	.resource	= kirkwood_i2s_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_i2s_data,
+	},
+};
+
+void __init kirkwood_audio_init(void)
+{
+	kirkwood_clk_ctrl |= CGC_AUDIO;
+	platform_device_register(&kirkwood_i2s_device);
+}
 
 /*****************************************************************************
  * General
@@ -923,6 +960,7 @@ void __init kirkwood_init(void)
 	kirkwood_spi_plat_data.tclk = kirkwood_tclk;
 	kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
 	kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
+	kirkwood_i2s_data.tclk = kirkwood_tclk;
 
 	/*
 	 * Disable propagation of mbus errors to the CPU local bus,

arch/arm/mach-kirkwood/common.h

@@ -17,6 +17,7 @@ struct mv_sata_platform_data;
 struct mvsdio_platform_data;
 struct mtd_partition;
 struct mtd_info;
+struct kirkwood_asoc_platform_data;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -43,6 +44,7 @@ void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_audio_init(void);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -96,6 +96,9 @@
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
+#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
+#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+
 /*
  * Supported devices and revisions.
  */

arch/arm/mach-kirkwood/openrd-setup.c

@@ -15,6 +15,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -60,6 +61,12 @@ static unsigned int openrd_mpp_config[] __initdata = {
 	0
 };
 
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("cs42l51", 0x4a),
+	},
+};
+
 static void __init openrd_init(void)
 {
 	/*
@@ -80,6 +87,12 @@ static void __init openrd_init(void)
 	kirkwood_sdio_init(&openrd_mvsdio_data);
 
 	kirkwood_i2c_init();
+
+	if (machine_is_openrd_client()) {
+		i2c_register_board_info(0, i2c_board_info,
+			ARRAY_SIZE(i2c_board_info));
+		kirkwood_audio_init();
+	}
 }
 
 static int __init openrd_pci_init(void)

arch/arm/plat-orion/include/plat/audio.h

@@ -0,0 +1,11 @@
+#ifndef __PLAT_AUDIO_H
+#define __PLAT_AUDIO_H
+
+#include <linux/mbus.h>
+
+struct kirkwood_asoc_platform_data {
+	u32 tclk;
+	struct mbus_dram_target_info *dram;
+	int burst;
+};
+#endif

include/sound/soc-dapm.h

@@ -273,6 +273,8 @@
 #define SND_SOC_DAPM_POST_PMD	0x8		/* after widget power down */
 #define SND_SOC_DAPM_PRE_REG	0x10	/* before audio path setup */
 #define SND_SOC_DAPM_POST_REG	0x20	/* after audio path setup */
+#define SND_SOC_DAPM_PRE_POST_PMD \
+				(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
 
 /* convenience event type detection */
 #define SND_SOC_DAPM_EVENT_ON(e)	\

include/sound/soc.h

@@ -170,6 +170,21 @@
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = (unsigned long)&xenum }
 
+#define SOC_DOUBLE_R_SX_TLV(xname, xreg_left, xreg_right, xshift,\
+		xmin, xmax, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+		  SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw_2r_sx, \
+	.get = snd_soc_get_volsw_2r_sx, \
+	.put = snd_soc_put_volsw_2r_sx, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg_left, \
+		 .rreg = xreg_right, .shift = xshift, \
+		 .min = xmin, .max = xmax} }
+
+
 /*
  * Simplified versions of above macros, declaring a struct and calculating
  * ARRAY_SIZE internally
@@ -329,6 +344,12 @@ int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_limit_volume(struct snd_soc_codec *codec,
 	const char *name, int max);
+int snd_soc_info_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_get_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_put_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
 
 /**
  * struct snd_soc_jack_pin - Describes a pin to update based on jack detection

sound/soc/Kconfig

@@ -30,7 +30,9 @@ source "sound/soc/blackfin/Kconfig"
 source "sound/soc/davinci/Kconfig"
 source "sound/soc/fsl/Kconfig"
 source "sound/soc/imx/Kconfig"
+source "sound/soc/nuc900/Kconfig"
 source "sound/soc/omap/Kconfig"
+source "sound/soc/kirkwood/Kconfig"
 source "sound/soc/pxa/Kconfig"
 source "sound/soc/s3c24xx/Kconfig"
 source "sound/soc/s6000/Kconfig"

sound/soc/Makefile

@@ -8,7 +8,9 @@ obj-$(CONFIG_SND_SOC)	+= blackfin/
 obj-$(CONFIG_SND_SOC)	+= davinci/
 obj-$(CONFIG_SND_SOC)	+= fsl/
 obj-$(CONFIG_SND_SOC)   += imx/
+obj-$(CONFIG_SND_SOC)	+= nuc900/
 obj-$(CONFIG_SND_SOC)	+= omap/
+obj-$(CONFIG_SND_SOC)	+= kirkwood/
 obj-$(CONFIG_SND_SOC)	+= pxa/
 obj-$(CONFIG_SND_SOC)	+= s3c24xx/
 obj-$(CONFIG_SND_SOC)	+= s6000/

sound/soc/codecs/Kconfig

@@ -22,6 +22,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_AK4642 if I2C
 	select SND_SOC_AK4671 if I2C
 	select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC
+	select SND_SOC_CS42L51 if I2C
 	select SND_SOC_CS4270 if I2C
 	select SND_SOC_MAX9877 if I2C
 	select SND_SOC_DA7210 if I2C
@@ -120,6 +121,9 @@ config SND_SOC_AK4671
 config SND_SOC_CQ0093VC
 	tristate
 
+config SND_SOC_CS42L51
+	tristate
+
 # Cirrus Logic CS4270 Codec
 config SND_SOC_CS4270
 	tristate

sound/soc/codecs/Makefile

@@ -9,6 +9,7 @@ snd-soc-ak4535-objs := ak4535.o
 snd-soc-ak4642-objs := ak4642.o
 snd-soc-ak4671-objs := ak4671.o
 snd-soc-cq93vc-objs := cq93vc.o
+snd-soc-cs42l51-objs := cs42l51.o
 snd-soc-cs4270-objs := cs4270.o
 snd-soc-cx20442-objs := cx20442.o
 snd-soc-da7210-objs := da7210.o
@@ -74,6 +75,7 @@ obj-$(CONFIG_SND_SOC_AK4535)	+= snd-soc-ak4535.o
 obj-$(CONFIG_SND_SOC_AK4642)	+= snd-soc-ak4642.o
 obj-$(CONFIG_SND_SOC_AK4671)	+= snd-soc-ak4671.o
 obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
+obj-$(CONFIG_SND_SOC_CS42L51)	+= snd-soc-cs42l51.o
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
 obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
 obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o

sound/soc/codecs/ad193x.c

@@ -24,6 +24,7 @@
 
 /* codec private data */
 struct ad193x_priv {
+	unsigned int sysclk;
 	struct snd_soc_codec codec;
 	u8 reg_cache[AD193X_NUM_REGS];
 };
@@ -251,15 +252,32 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	return 0;
 }
 
+static int ad193x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec);
+	switch (freq) {
+	case 12288000:
+	case 18432000:
+	case 24576000:
+	case 36864000:
+		ad193x->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
 static int ad193x_hw_params(struct snd_pcm_substream *substream,
 		struct snd_pcm_hw_params *params,
 		struct snd_soc_dai *dai)
 {
-	int word_len = 0, reg = 0;
+	int word_len = 0, reg = 0, master_rate = 0;
 
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
+	struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec);
 
 	/* bit size */
 	switch (params_format(params)) {
@@ -275,6 +293,25 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream,
 		break;
 	}
 
+	switch (ad193x->sysclk) {
+	case 12288000:
+		master_rate = AD193X_PLL_INPUT_256;
+		break;
+	case 18432000:
+		master_rate = AD193X_PLL_INPUT_384;
+		break;
+	case 24576000:
+		master_rate = AD193X_PLL_INPUT_512;
+		break;
+	case 36864000:
+		master_rate = AD193X_PLL_INPUT_768;
+		break;
+	}
+
+	reg = snd_soc_read(codec, AD193X_PLL_CLK_CTRL0);
+	reg = (reg & AD193X_PLL_INPUT_MASK) | master_rate;
+	snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, reg);
+
 	reg = snd_soc_read(codec, AD193X_DAC_CTRL2);
 	reg = (reg & (~AD193X_DAC_WORD_LEN_MASK)) | word_len;
 	snd_soc_write(codec, AD193X_DAC_CTRL2, reg);
@@ -348,6 +385,7 @@ static int ad193x_bus_probe(struct device *dev, void *ctrl_data, int bus_type)
 	/* pll input: mclki/xi */
 	snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, 0x99); /* mclk=24.576Mhz: 0x9D; mclk=12.288Mhz: 0x99 */
 	snd_soc_write(codec, AD193X_PLL_CLK_CTRL1, 0x04);
+	ad193x->sysclk = 12288000;
 
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
@@ -383,6 +421,7 @@ static struct snd_soc_dai_ops ad193x_dai_ops = {
 	.hw_params = ad193x_hw_params,
 	.digital_mute = ad193x_mute,
 	.set_tdm_slot = ad193x_set_tdm_slot,
+	.set_sysclk	= ad193x_set_dai_sysclk,
 	.set_fmt = ad193x_set_dai_fmt,
 };
 

sound/soc/codecs/ad193x.h

@@ -11,6 +11,11 @@
 
 #define AD193X_PLL_CLK_CTRL0    0x800
 #define AD193X_PLL_POWERDOWN           0x01
+#define AD193X_PLL_INPUT_MASK   (~0x6)
+#define AD193X_PLL_INPUT_256    (0 << 1)
+#define AD193X_PLL_INPUT_384    (1 << 1)
+#define AD193X_PLL_INPUT_512    (2 << 1)
+#define AD193X_PLL_INPUT_768    (3 << 1)
 #define AD193X_PLL_CLK_CTRL1    0x801
 #define AD193X_DAC_CTRL0        0x802
 #define AD193X_DAC_POWERDOWN           0x01