---

yaml
---
r: 231114
b: refs/heads/master
c: 2743536
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d7cd5c73cec2dfa9f259a2adcf802c9f8fcc125f
+refs/heads/master: 274353674dd0337bdeeaee08a9f2047777b07ab0

trunk/arch/arm/mach-omap2/board-igep0030.c

@@ -103,7 +103,7 @@ static struct platform_device igep3_onenand_device = {
 	},
 };
 
-void __init igep3_flash_init(void)
+static void __init igep3_flash_init(void)
 {
 	u8 cs = 0;
 	u8 onenandcs = GPMC_CS_NUM + 1;
@@ -137,7 +137,7 @@ void __init igep3_flash_init(void)
 }
 
 #else
-void __init igep3_flash_init(void) {}
+static void __init igep3_flash_init(void) {}
 #endif
 
 static struct regulator_consumer_supply igep3_vmmc1_supply = {

trunk/arch/arm/mach-omap2/board-omap4panda.c

@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
@@ -95,7 +96,16 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 static void __init omap4_ehci_init(void)
 {
 	int ret;
+	struct clk *phy_ref_clk;
 
+	/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+	phy_ref_clk = clk_get(NULL, "auxclk3_ck");
+	if (IS_ERR(phy_ref_clk)) {
+		pr_err("Cannot request auxclk3\n");
+		goto error1;
+	}
+	clk_set_rate(phy_ref_clk, 19200000);
+	clk_enable(phy_ref_clk);
 
 	/* disable the power to the usb hub prior to init */
 	ret = gpio_request(GPIO_HUB_POWER, "hub_power");

trunk/arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -190,7 +190,7 @@ static struct platform_device omap_vwlan_device = {
 	},
 };
 
-struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
+static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
 	.irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
 	/* ZOOM ref clock is 26 MHz */
 	.board_ref_clock = 1,
@@ -242,7 +242,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
 }
 
 /* EXTMUTE callback function */
-void zoom2_set_hs_extmute(int mute)
+static void zoom2_set_hs_extmute(int mute)
 {
 	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
 }

trunk/arch/arm/mach-omap2/clockdomain.h

@@ -103,9 +103,7 @@ struct clockdomain {
 		const char *name;
 		struct powerdomain *ptr;
 	} pwrdm;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	const u16 clktrctrl_mask;
-#endif
 	const u8 flags;
 	const u8 dep_bit;
 	const u8 prcm_partition;

trunk/arch/arm/mach-omap2/devices.c

@@ -978,7 +978,7 @@ static int __init omap2_init_devices(void)
 arch_initcall(omap2_init_devices);
 
 #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-struct omap_device_pm_latency omap_wdt_latency[] = {
+static struct omap_device_pm_latency omap_wdt_latency[] = {
 	[0] = {
 		.deactivate_func = omap_device_idle_hwmods,
 		.activate_func   = omap_device_enable_hwmods,

trunk/arch/arm/mach-omap2/mux.c

@@ -893,7 +893,7 @@ static struct omap_mux * __init omap_mux_list_add(
 		return NULL;
 
 	m = &entry->mux;
-	memcpy(m, src, sizeof(struct omap_mux_entry));
+	entry->mux = *src;
 
 #ifdef CONFIG_OMAP_MUX
 	if (omap_mux_copy_names(src, m)) {

trunk/arch/arm/mach-omap2/mux34xx.c

@@ -703,7 +703,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
  * Signals different on CBC package compared to the superset
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
-struct omap_mux __initdata omap3_cbc_subset[] = {
+static struct omap_mux __initdata omap3_cbc_subset[] = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -721,7 +721,7 @@ struct omap_mux __initdata omap3_cbc_subset[] = {
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)	\
 		&& defined(CONFIG_OMAP_PACKAGE_CBC)
-struct omap_ball __initdata omap3_cbc_ball[] = {
+static struct omap_ball __initdata omap3_cbc_ball[] = {
 	_OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
 	_OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
 	_OMAP3_BALLENTRY(CAM_D10, "d25", NULL),

trunk/arch/arm/mach-omap2/mux44xx.c

@@ -544,7 +544,7 @@ static struct omap_mux __initdata omap4_core_muxmodes[] = {
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
 		&& defined(CONFIG_OMAP_PACKAGE_CBL)
-struct omap_ball __initdata omap4_core_cbl_ball[] = {
+static struct omap_ball __initdata omap4_core_cbl_ball[] = {
 	_OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL),
 	_OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL),
 	_OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL),
@@ -1262,7 +1262,7 @@ static struct omap_mux __initdata omap4_es2_core_muxmodes[] = {
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
 		&& defined(CONFIG_OMAP_PACKAGE_CBS)
-struct omap_ball __initdata omap4_core_cbs_ball[] = {
+static struct omap_ball __initdata omap4_core_cbs_ball[] = {
 	_OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL),
 	_OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL),
 	_OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL),
@@ -1546,7 +1546,7 @@ static struct omap_mux __initdata omap4_wkup_muxmodes[] = {
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
 		&& defined(CONFIG_OMAP_PACKAGE_CBL)
-struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
+static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
 	_OMAP4_BALLENTRY(SIM_IO, "h4", NULL),
 	_OMAP4_BALLENTRY(SIM_CLK, "j2", NULL),
 	_OMAP4_BALLENTRY(SIM_RESET, "g2", NULL),

trunk/arch/arm/mach-omap2/omap_twl.c

@@ -20,6 +20,8 @@
 
 #include <plat/voltage.h>
 
+#include "pm.h"
+
 #define OMAP3_SRI2C_SLAVE_ADDR		0x12
 #define OMAP3_VDD_MPU_SR_CONTROL_REG	0x00
 #define OMAP3_VDD_CORE_SR_CONTROL_REG	0x01
@@ -60,17 +62,17 @@ static u8 smps_offset;
 
 #define REG_SMPS_OFFSET         0xE0
 
-unsigned long twl4030_vsel_to_uv(const u8 vsel)
+static unsigned long twl4030_vsel_to_uv(const u8 vsel)
 {
 	return (((vsel * 125) + 6000)) * 100;
 }
 
-u8 twl4030_uv_to_vsel(unsigned long uv)
+static u8 twl4030_uv_to_vsel(unsigned long uv)
 {
 	return DIV_ROUND_UP(uv - 600000, 12500);
 }
 
-unsigned long twl6030_vsel_to_uv(const u8 vsel)
+static unsigned long twl6030_vsel_to_uv(const u8 vsel)
 {
 	/*
 	 * In TWL6030 depending on the value of SMPS_OFFSET
@@ -102,7 +104,7 @@ unsigned long twl6030_vsel_to_uv(const u8 vsel)
 		return ((((vsel - 1) * 125) + 6000)) * 100;
 }
 
-u8 twl6030_uv_to_vsel(unsigned long uv)
+static u8 twl6030_uv_to_vsel(unsigned long uv)
 {
 	/*
 	 * In TWL6030 depending on the value of SMPS_OFFSET

trunk/arch/arm/mach-omap2/pm_bus.c

@@ -20,7 +20,7 @@
 #include <plat/omap-pm.h>
 
 #ifdef CONFIG_PM_RUNTIME
-int omap_pm_runtime_suspend(struct device *dev)
+static int omap_pm_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	int r, ret = 0;
@@ -37,7 +37,7 @@ int omap_pm_runtime_suspend(struct device *dev)
 	return ret;
 };
 
-int omap_pm_runtime_resume(struct device *dev)
+static int omap_pm_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	int r;

trunk/arch/arm/mach-omap2/prm2xxx_3xxx.h

@@ -228,7 +228,67 @@
 
 
 #ifndef __ASSEMBLER__
-
+/*
+ * Stub omap2xxx/omap3xxx functions so that common files
+ * continue to build when custom builds are used
+ */
+#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) ||	\
+					defined(CONFIG_ARCH_OMAP3))
+static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+	return 0;
+}
+static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+}
+static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
+		s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+	return 0;
+}
+static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+	return 0;
+}
+static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+	return 0;
+}
+static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+	return 0;
+}
+static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+	return 0;
+}
+static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+	return 0;
+}
+static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+		"not suppose to be used on omap4\n");
+	return 0;
+}
+#else
 /* Power/reset management domain register get/set */
 extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
 extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
@@ -242,6 +302,7 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
 extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
 extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
 
+#endif	/* CONFIG_ARCH_OMAP4 */
 #endif
 
 /*

trunk/arch/arm/mach-omap2/sr_device.c

@@ -27,6 +27,7 @@
 #include <plat/voltage.h>
 
 #include "control.h"
+#include "pm.h"
 
 static bool sr_enable_on_init;
 

trunk/arch/arm/mach-omap2/wd_timer.c

@@ -13,6 +13,8 @@
 
 #include <plat/omap_hwmod.h>
 
+#include "wd_timer.h"
+
 /*
  * In order to avoid any assumptions from bootloader regarding WDT
  * settings, WDT module is reset during init. This enables the watchdog

trunk/arch/arm/mm/Kconfig

@@ -644,7 +644,7 @@ config ARM_THUMBEE
 
 config SWP_EMULATE
 	bool "Emulate SWP/SWPB instructions"
-	depends on CPU_V7
+	depends on CPU_V7 && !CPU_V6
 	select HAVE_PROC_CPU if PROC_FS
 	default y if SMP
 	help

trunk/arch/arm/plat-omap/gpio.c

@@ -718,7 +718,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_24XX:
 	case METHOD_GPIO_44XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
-		break;
+		return 0;
 #endif
 	default:
 		goto bad;
@@ -756,8 +756,10 @@ static int gpio_irq_type(unsigned irq, unsigned type)
 	spin_lock_irqsave(&bank->lock, flags);
 	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
 	if (retval == 0) {
-		irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
-		irq_desc[irq].status |= type;
+		struct irq_desc *d = irq_to_desc(irq);
+
+		d->status &= ~IRQ_TYPE_SENSE_MASK;
+		d->status |= type;
 	}
 	spin_unlock_irqrestore(&bank->lock, flags);
 
@@ -1671,7 +1673,9 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank)
 
 	for (j = bank->virtual_irq_start;
 		     j < bank->virtual_irq_start + bank_width; j++) {
-		lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
+		struct irq_desc *d = irq_to_desc(j);
+
+		lockdep_set_class(&d->lock, &gpio_lock_class);
 		set_irq_chip_data(j, bank);
 		if (bank_is_mpuio(bank))
 			set_irq_chip(j, &mpuio_irq_chip);

trunk/arch/arm/plat-omap/include/plat/voltage.h

@@ -14,6 +14,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
 #define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
 
+#include <linux/err.h>
+
 #define VOLTSCALE_VPFORCEUPDATE		1
 #define VOLTSCALE_VCBYPASS		2
 
@@ -65,9 +67,6 @@ struct voltagedomain {
 	char *name;
 };
 
-/* API to get the voltagedomain pointer */
-struct voltagedomain *omap_voltage_domain_lookup(char *name);
-
 /**
  * struct omap_volt_data - Omap voltage specific data.
  * @voltage_nominal:	The possible voltage value in uV
@@ -131,16 +130,26 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm,
 		struct omap_volt_pmic_info *pmic_info);
 void omap_change_voltscale_method(struct voltagedomain *voltdm,
 		int voltscale_method);
+/* API to get the voltagedomain pointer */
+struct voltagedomain *omap_voltage_domain_lookup(char *name);
+
 int omap_voltage_late_init(void);
 #else
 static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
-		struct omap_volt_pmic_info *pmic_info) {}
+		struct omap_volt_pmic_info *pmic_info)
+{
+	return -EINVAL;
+}
 static inline  void omap_change_voltscale_method(struct voltagedomain *voltdm,
 		int voltscale_method) {}
 static inline int omap_voltage_late_init(void)
 {
 	return -EINVAL;
 }
+static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
+{
+	return ERR_PTR(-EINVAL);
+}
 #endif
 
 #endif