---

yaml
---
r: 295717
b: refs/heads/master
c: 86ca5b6
h: refs/heads/master
i:
  295715: 0641e99
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: dd713e97f7e08b5742d9252f404cde34b97e1587
+refs/heads/master: 86ca5b6fef2bf1aa77a62f29d844400e4fed8dde

trunk/Documentation/feature-removal-schedule.txt

@@ -510,17 +510,3 @@ Why:	The pci_scan_bus_parented() interface creates a new root bus.  The
 	convert to using pci_scan_root_bus() so they can supply a list of
 	bus resources when the bus is created.
 Who:	Bjorn Helgaas <bhelgaas@google.com>
-
-----------------------------
-
-What:	The CAP9 SoC family will be removed
-When:	3.4
-Files:	arch/arm/mach-at91/at91cap9.c
-	arch/arm/mach-at91/at91cap9_devices.c
-	arch/arm/mach-at91/include/mach/at91cap9.h
-	arch/arm/mach-at91/include/mach/at91cap9_matrix.h
-	arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
-	arch/arm/mach-at91/board-cap9adk.c
-Why:	The code is not actively maintained and platforms are now hard to find.
-Who:	Nicolas Ferre <nicolas.ferre@atmel.com>
-	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

trunk/MAINTAINERS

@@ -269,7 +269,6 @@ S:	Orphan
 F:	drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
@@ -3047,7 +3046,6 @@ F:	drivers/hwspinlock/hwspinlock_*
 F:	include/linux/hwspinlock.h
 
 HARMONY SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
@@ -5000,9 +4998,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-M:	Kyle McMartin <kyle@mcmartin.ca>
-M:	Helge Deller <deller@gmx.de>
 M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/
@@ -5861,7 +5858,7 @@ S:	Maintained
 F:	drivers/mmc/host/sdhci-spear.c
 
 SECURITY SUBSYSTEM
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
 W:	http://security.wiki.kernel.org/
@@ -5874,7 +5871,7 @@ S:	Supported
 
 SELINUX SECURITY MODULE
 M:	Stephen Smalley <sds@tycho.nsa.gov>
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -186,6 +186,9 @@ config GENERIC_ISA_DMA
 config FIQ
 	bool
 
+config NEED_RET_TO_USER
+	bool
+
 config ARCH_MTD_XIP
 	bool
 
@@ -324,7 +327,7 @@ config ARCH_AT91
 	select CLKDEV_LOOKUP
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
-	  AT91SAM9 and AT91CAP9 processors.
+	  AT91SAM9 processors.
 
 config ARCH_BCMRING
 	bool "Broadcom BCMRING"
@@ -479,13 +482,15 @@ config ARCH_IOP13XX
 	select ARCH_SUPPORTS_MSI
 	select VMSPLIT_1G
 	select NEED_MACH_MEMORY_H
+	select NEED_RET_TO_USER
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_RET_TO_USER
 	select PLAT_IOP
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
@@ -497,6 +502,7 @@ config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
 	select CPU_XSCALE
+	select NEED_RET_TO_USER
 	select PLAT_IOP
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
@@ -763,22 +769,21 @@ config ARCH_SA1100
 	help
 	  Support for StrongARM 11x0 based boards.
 
-config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
+config ARCH_S3C24XX
+	bool "Samsung S3C24XX SoCs"
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
-	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
-	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
-	  the Samsung SMDK2410 development board (and derivatives).
-
-	  Note, the S3C2416 and the S3C2450 are so close that they even share
-	  the same SoC ID code. This means that there is no separate machine
-	  directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
+	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
+	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
+	  Samsung SMDK2410 development board (and derivatives).
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
@@ -1066,12 +1071,10 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
-if ARCH_S3C2410
-source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c24xx/Kconfig"
+if ARCH_S3C24XX
 source "arch/arm/mach-s3c2412/Kconfig"
-source "arch/arm/mach-s3c2416/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
 if ARCH_S3C64XX
@@ -1588,7 +1591,7 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
+	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
@@ -2114,7 +2117,7 @@ config CPU_FREQ_S3C
 
 config CPU_FREQ_S3C24XX
 	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
 	select CPU_FREQ_S3C
 	help
 	  This enables the CPUfreq driver for the Samsung S3C24XX family

trunk/arch/arm/Kconfig.debug

@@ -81,47 +81,14 @@ choice
 	prompt "Kernel low-level debugging port"
 	depends on DEBUG_LL
 
-	config DEBUG_LL_UART_NONE
-		bool "No low-level debugging UART"
-		help
-		  Say Y here if your platform doesn't provide a UART option
-		  below. This relies on your platform choosing the right UART
-		  definition internally in order for low-level debugging to
-		  work.
-
-	config DEBUG_ICEDCC
-		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the EmbeddedICE macrocell's DCC channel using
-		  co-processor 14. This is known to work on the ARM9 style ICE
-		  channel and on the XScale with the PEEDI.
-
-		  Note that the system will appear to hang during boot if there
-		  is nothing connected to read from the DCC.
-
 	config AT91_DEBUG_LL_DBGU0
 		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
 		depends on HAVE_AT91_DBGU0
 
 	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+		bool "Kernel low-level debugging on 9263 and 9g45"
 		depends on HAVE_AT91_DBGU1
 
-	config DEBUG_FOOTBRIDGE_COM1
-		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the 8250 at PCI COM1.
-
-	config DEBUG_DC21285_PORT
-		bool "Kernel low-level debugging messages via footbridge serial port"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port in the DC21285 (Footbridge).
-
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_DC21285_PORT
+		bool "Kernel low-level debugging messages via footbridge serial port"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port in the DC21285 (Footbridge).
+
+	config DEBUG_FOOTBRIDGE_COM1
+		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the 8250 at PCI COM1.
+
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
 		depends on ARCH_HIGHBANK
@@ -206,38 +187,42 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6Q.
 
-	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 0 for low-level debug"
+	config DEBUG_MSM_UART1
+		bool "Kernel low-level debugging messages via MSM UART1"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+		  their output to the first serial port on MSM devices.
 
-	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 1 for low-level debug"
+	config DEBUG_MSM_UART2
+		bool "Kernel low-level debugging messages via MSM UART2"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
+		  their output to the second serial port on MSM devices.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+	config DEBUG_MSM_UART3
+		bool "Kernel low-level debugging messages via MSM UART3"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the third serial port on MSM devices.
 
-	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 2 for low-level debug"
+	config DEBUG_MSM8660_UART
+		bool "Kernel low-level debugging messages via MSM 8660 UART"
+		depends on ARCH_MSM8X60
+		select MSM_HAS_DEBUG_UART_HS
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
+		  their output to the serial port on MSM 8660 devices.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+	config DEBUG_MSM8960_UART
+		bool "Kernel low-level debugging messages via MSM 8960 UART"
+		depends on ARCH_MSM8960
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8960 devices.
 
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
@@ -255,42 +240,57 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
-	config DEBUG_MSM_UART1
-		bool "Kernel low-level debugging messages via MSM UART1"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+	config DEBUG_S3C_UART0
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on MSM devices.
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM_UART2
-		bool "Kernel low-level debugging messages via MSM UART2"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART1
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the second serial port on MSM devices.
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM_UART3
-		bool "Kernel low-level debugging messages via MSM UART3"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART2
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the third serial port on MSM devices.
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM8660_UART
-		bool "Kernel low-level debugging messages via MSM 8660 UART"
-		depends on ARCH_MSM8X60
-		select MSM_HAS_DEBUG_UART_HS
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_LL_UART_NONE
+		bool "No low-level debugging UART"
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8660 devices.
+		  Say Y here if your platform doesn't provide a UART option
+		  below. This relies on your platform choosing the right UART
+		  definition internally in order for low-level debugging to
+		  work.
 
-	config DEBUG_MSM8960_UART
-		bool "Kernel low-level debugging messages via MSM 8960 UART"
-		depends on ARCH_MSM8960
-		select MSM_HAS_DEBUG_UART_HS
+	config DEBUG_ICEDCC
+		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8960 devices.
+		  their output to the EmbeddedICE macrocell's DCC channel using
+		  co-processor 14. This is known to work on the ARM9 style ICE
+		  channel and on the XScale with the PEEDI.
+
+		  Note that the system will appear to hang during boot if there
+		  is nothing connected to read from the DCC.
 
 endchoice