---

yaml
---
r: 264138
b: refs/heads/master
c: 5711932
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e8b364b88cc4001b21c28c1ecf1e1e3ffbe162e6
+refs/heads/master: 57119327df3a824dc9a59973d3db7e5bdd2e75cc

trunk/Documentation/hwmon/coretemp

@@ -35,23 +35,17 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
 All Sysfs entries are named with their core_id (represented here by 'X').
 tempX_input	 - Core temperature (in millidegrees Celsius).
 tempX_max	 - All cooling devices should be turned on (on Core2).
-		   Initialized with IA32_THERM_INTERRUPT. When the CPU
-		   temperature reaches this temperature, an interrupt is
-		   generated and tempX_max_alarm is set.
-tempX_max_hyst   - If the CPU temperature falls below than temperature,
-		   an interrupt is generated and tempX_max_alarm is reset.
-tempX_max_alarm  - Set if the temperature reaches or exceeds tempX_max.
-		   Reset if the temperature drops to or below tempX_max_hyst.
 tempX_crit	 - Maximum junction temperature (in millidegrees Celsius).
 tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
 		   Correct CPU operation is no longer guaranteed.
 tempX_label	 - Contains string "Core X", where X is processor
 		   number. For Package temp, this will be "Physical id Y",
 		   where Y is the package number.
 
-The TjMax temperature is set to 85 degrees C if undocumented model specific
-register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
-(sometimes) documented in processor datasheet.
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
 
 Appendix A. Known TjMax lists (TBD):
 Some information comes from ark.intel.com

trunk/arch/arm/Kconfig

@@ -1283,6 +1283,20 @@ config ARM_ERRATA_364296
 	  processor into full low interrupt latency mode. ARM11MPCore
 	  is not affected.
 
+config ARM_ERRATA_764369
+	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for erratum 764369
+	  affecting Cortex-A9 MPCore with two or more processors (all
+	  current revisions). Under certain timing circumstances, a data
+	  cache line maintenance operation by MVA targeting an Inner
+	  Shareable memory region may fail to proceed up to either the
+	  Point of Coherency or to the Point of Unification of the
+	  system. This workaround adds a DSB instruction before the
+	  relevant cache maintenance functions and sets a specific bit
+	  in the diagnostic control register of the SCU.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

trunk/arch/arm/include/asm/futex.h

@@ -25,17 +25,17 @@
 
 #ifdef CONFIG_SMP
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	smp_mb();						\
 	__asm__ __volatile__(					\
-	"1:	ldrex	%1, [%2]\n"				\
+	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
-	"2:	strex	%1, %0, [%2]\n"				\
-	"	teq	%1, #0\n"				\
+	"2:	strex	%2, %0, [%3]\n"				\
+	"	teq	%2, #0\n"				\
 	"	bne	1b\n"					\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 #include <linux/preempt.h>
 #include <asm/domain.h>
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%2]\n"			\
+	"1:	" T(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%2]\n"			\
+	"2:	" T(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	int cmp = (encoded_op >> 24) & 15;
 	int oparg = (encoded_op << 8) >> 20;
 	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
+	int oldval = 0, ret, tmp;
 
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
@@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mov	%0, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("orr	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("orr	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3", ret, oldval, uaddr, ~oparg);
+		__futex_atomic_op("and	%0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("eor	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("eor	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;

trunk/arch/arm/include/asm/unistd.h

@@ -478,8 +478,8 @@
 /*
  * Unimplemented (or alternatively implemented) syscalls
  */
-#define __IGNORE_fadvise64_64		1
-#define __IGNORE_migrate_pages		1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */

trunk/arch/arm/kernel/smp_scu.c

@@ -13,6 +13,7 @@
 
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 
 #define SCU_CTRL		0x00
 #define SCU_CONFIG		0x04
@@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base)
 {
 	u32 scu_ctrl;
 
+#ifdef CONFIG_ARM_ERRATA_764369
+	/* Cortex-A9 only */
+	if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+		scu_ctrl = __raw_readl(scu_base + 0x30);
+		if (!(scu_ctrl & 1))
+			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+	}
+#endif
+
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)

trunk/arch/arm/kernel/vmlinux.lds.S

@@ -23,8 +23,10 @@
 
 #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
 #define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
 #else
 #define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
 #endif
 
 OUTPUT_ARCH(arm)
@@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4;
 SECTIONS
 {
 	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
 	 * unwind exit sections must be discarded before the rest of the
 	 * unwind sections get included.
 	 */
@@ -47,6 +54,9 @@ SECTIONS
 		*(.ARM.extab.exit.text)
 		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
 		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -58,6 +68,8 @@ SECTIONS
 #ifndef CONFIG_SMP_ON_UP
 		*(.alt.smp.init)
 #endif
+		*(.discard)
+		*(.discard.*)
 	}
 
 #ifdef CONFIG_XIP_KERNEL
@@ -279,9 +291,6 @@ SECTIONS
 
 	STABS_DEBUG
 	.comment 0 : { *(.comment) }
-
-	/* Default discards */
-	DISCARDS
 }
 
 /*

trunk/arch/arm/mach-exynos4/clock.c

@@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 20),
 		},

trunk/arch/arm/mach-s3c2443/clock.c

@@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 		unsigned long clkcon0;
 
 		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
 		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
 		__raw_writel(clkcon0, S3C2443_CLKDIV0);
 	}

trunk/arch/arm/mach-s5pv210/clock.c

@@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 3),
 		},
@@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 4),
 		},

trunk/arch/arm/mm/cache-v7.S

@@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
  USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
 	add	r12, r12, r2
@@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area)
 	add	r1, r0, r1
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
 	add	r0, r0, r2
@@ -247,6 +255,10 @@ v7_dma_inv_range:
 	sub	r3, r2, #1
 	tst	r0, r3
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 
 	tst	r1, r3
@@ -270,6 +282,10 @@ v7_dma_clean_range:
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
 	add	r0, r0, r2
@@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 	add	r0, r0, r2

trunk/arch/arm/mm/dma-mapping.c

@@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 
 	if (addr)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
+	else
+		__dma_free_buffer(page, size);
 
 	return addr;
 }

trunk/arch/arm/plat-s5p/irq-gpioint.c

@@ -114,17 +114,18 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
-	struct s5p_gpioint_bank *bank = NULL;
+	struct s5p_gpioint_bank *b, *bank = NULL;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
 		return -ENOMEM;
 
-	list_for_each_entry(bank, &banks, list) {
-		if (group >= bank->start &&
-		    group < bank->start + bank->nr_groups)
+	list_for_each_entry(b, &banks, list) {
+		if (group >= b->start && group < b->start + b->nr_groups) {
+			bank = b;
 			break;
+		}
 	}
 	if (!bank)
 		return -EINVAL;

trunk/arch/x86/kvm/emulate.c

@@ -3603,7 +3603,7 @@ int x86_decode_insn(struct x86_emulate_ctxt *ctxt, void *insn, int insn_len)
 		break;
 	case Src2CL:
 		ctxt->src2.bytes = 1;
-		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8;
+		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
 		break;
 	case Src2ImmByte:
 		rc = decode_imm(ctxt, &ctxt->src2, 1, true);

trunk/arch/x86/kvm/mmu.c

@@ -400,7 +400,8 @@ static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
 
 	/* xchg acts as a barrier before the setting of the high bits */
 	orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
-	orig.spte_high = ssptep->spte_high = sspte.spte_high;
+	orig.spte_high = ssptep->spte_high;
+	ssptep->spte_high = sspte.spte_high;
 	count_spte_clear(sptep, spte);
 
 	return orig.spte;