---

yaml
---
r: 92982
b: refs/heads/master
c: dd0e101
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 00c6b2d5d7b2414bd46c620d6a8c37fa7a716f29
+refs/heads/master: dd0e101d630b0d7ed6c9e1ccf7af7fc91818330e

trunk/Documentation/HOWTO

@@ -249,9 +249,11 @@ process is as follows:
     release a new -rc kernel every week.
   - Process continues until the kernel is considered "ready", the
     process should last around 6 weeks.
-  - A list of known regressions present in each -rc release is
-    tracked at the following URI:
-    http://kernelnewbies.org/known_regressions
+  - Known regressions in each release are periodically posted to the 
+    linux-kernel mailing list.  The goal is to reduce the length of 
+    that list to zero before declaring the kernel to be "ready," but, in
+    the real world, a small number of regressions often remain at 
+    release time.
 
 It is worth mentioning what Andrew Morton wrote on the linux-kernel
 mailing list about kernel releases:
@@ -261,7 +263,7 @@ mailing list about kernel releases:
 
 2.6.x.y -stable kernel tree
 ---------------------------
-Kernels with 4 digit versions are -stable kernels. They contain
+Kernels with 4-part versions are -stable kernels. They contain
 relatively small and critical fixes for security problems or significant
 regressions discovered in a given 2.6.x kernel.
 
@@ -273,7 +275,10 @@ If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
 kernel is the current stable kernel.
 
 2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
-released almost every other week.
+released as needs dictate.  The normal release period is approximately 
+two weeks, but it can be longer if there are no pressing problems.  A
+security-related problem, instead, can cause a release to happen almost
+instantly.
 
 The file Documentation/stable_kernel_rules.txt in the kernel tree
 documents what kinds of changes are acceptable for the -stable tree, and
@@ -298,7 +303,9 @@ a while Andrew or the subsystem maintainer pushes it on to Linus for
 inclusion in mainline.
 
 It is heavily encouraged that all new patches get tested in the -mm tree
-before they are sent to Linus for inclusion in the main kernel tree.
+before they are sent to Linus for inclusion in the main kernel tree.  Code
+which does not make an appearance in -mm before the opening of the merge
+window will prove hard to merge into the mainline.
 
 These kernels are not appropriate for use on systems that are supposed
 to be stable and they are more risky to run than any of the other
@@ -354,11 +361,12 @@ Here is a list of some of the different kernel trees available:
     - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
 	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 
+    - x86, Ingo Molnar <mingo@elte.hu>
+	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+
   quilt trees:
-    - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
+    - USB, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
 	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
-    - x86-64, partly i386, Andi Kleen <ak@suse.de>
-        ftp.firstfloor.org:/pub/ak/x86_64/quilt/
 
   Other kernel trees can be found listed at http://git.kernel.org/ and in
   the MAINTAINERS file.
@@ -392,8 +400,8 @@ If you want to be advised of the future bug reports, you can subscribe to the
 bugme-new mailing list (only new bug reports are mailed here) or to the
 bugme-janitor mailing list (every change in the bugzilla is mailed here)
 
-	http://lists.osdl.org/mailman/listinfo/bugme-new
-	http://lists.osdl.org/mailman/listinfo/bugme-janitors
+	http://lists.linux-foundation.org/mailman/listinfo/bugme-new
+	http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
 
 
 

trunk/Documentation/filesystems/nfs-rdma.txt

@@ -5,7 +5,7 @@
 ################################################################################
 
  Author: NetApp and Open Grid Computing
- Date: February 25, 2008
+ Date: April 15, 2008
 
 Table of Contents
 ~~~~~~~~~~~~~~~~~
@@ -197,12 +197,16 @@ NFS/RDMA Setup
   - On the server system, configure the /etc/exports file and
     start the NFS/RDMA server.
 
-    Exports entries with the following format have been tested:
+    Exports entries with the following formats have been tested:
 
-    /vol0   10.97.103.47(rw,async) 192.168.0.47(rw,async,insecure,no_root_squash)
+    /vol0   192.168.0.47(fsid=0,rw,async,insecure,no_root_squash)
+    /vol0   192.168.0.0/255.255.255.0(fsid=0,rw,async,insecure,no_root_squash)
 
-    Here the first IP address is the client's Ethernet address and the second
-    IP address is the clients IPoIB address.
+    The IP address(es) is(are) the client's IPoIB address for an InfiniBand HCA or the
+    cleint's iWARP address(es) for an RNIC.
+
+    NOTE: The "insecure" option must be used because the NFS/RDMA client does not
+    use a reserved port.
 
  Each time a machine boots:
 

trunk/Documentation/filesystems/seq_file.txt

@@ -122,8 +122,7 @@ stop() is the place to free it.
 	}
 
 Finally, the show() function should format the object currently pointed to
-by the iterator for output. It should return zero, or an error code if
-something goes wrong. The example module's show() function is:
+by the iterator for output.  The example module's show() function is:
 
 	static int ct_seq_show(struct seq_file *s, void *v)
 	{
@@ -132,6 +131,12 @@ something goes wrong. The example module's show() function is:
 	        return 0;
 	}
 
+If all is well, the show() function should return zero.  A negative error
+code in the usual manner indicates that something went wrong; it will be
+passed back to user space.  This function can also return SEQ_SKIP, which
+causes the current item to be skipped; if the show() function has already
+generated output before returning SEQ_SKIP, that output will be dropped.
+
 We will look at seq_printf() in a moment. But first, the definition of the
 seq_file iterator is finished by creating a seq_operations structure with
 the four functions we have just defined:
@@ -182,12 +187,18 @@ The first two output a single character and a string, just like one would
 expect. seq_escape() is like seq_puts(), except that any character in s
 which is in the string esc will be represented in octal form in the output.
 
-There is also a function for printing filenames:
+There is also a pair of functions for printing filenames:
 
 	int seq_path(struct seq_file *m, struct path *path, char *esc);
+	int seq_path_root(struct seq_file *m, struct path *path,
+			  struct path *root, char *esc)
 
 Here, path indicates the file of interest, and esc is a set of characters
-which should be escaped in the output.
+which should be escaped in the output.  A call to seq_path() will output
+the path relative to the current process's filesystem root.  If a different
+root is desired, it can be used with seq_path_root().  Note that, if it
+turns out that path cannot be reached from root, the value of root will be
+changed in seq_file_root() to a root which *does* work.
 
 
 Making it all work

trunk/fs/lockd/svclock.c

@@ -632,7 +632,7 @@ nlmsvc_update_deferred_block(struct nlm_block *block, struct file_lock *conf,
 		block->b_flags |= B_TIMED_OUT;
 	if (conf) {
 		if (block->b_fl)
-			locks_copy_lock(block->b_fl, conf);
+			__locks_copy_lock(block->b_fl, conf);
 	}
 }
 

trunk/fs/lockd/svcsubs.c

@@ -18,6 +18,8 @@
 #include <linux/lockd/lockd.h>
 #include <linux/lockd/share.h>
 #include <linux/lockd/sm_inter.h>
+#include <linux/module.h>
+#include <linux/mount.h>
 
 #define NLMDBG_FACILITY		NLMDBG_SVCSUBS
 
@@ -194,6 +196,12 @@ nlm_traverse_locks(struct nlm_host *host, struct nlm_file *file,
 	return 0;
 }
 
+static int
+nlmsvc_always_match(void *dummy1, struct nlm_host *dummy2)
+{
+	return 1;
+}
+
 /*
  * Inspect a single file
  */
@@ -230,7 +238,8 @@ nlm_file_inuse(struct nlm_file *file)
  * Loop over all files in the file table.
  */
 static int
-nlm_traverse_files(struct nlm_host *host, nlm_host_match_fn_t match)
+nlm_traverse_files(void *data, nlm_host_match_fn_t match,
+		int (*is_failover_file)(void *data, struct nlm_file *file))
 {
 	struct hlist_node *pos, *next;
 	struct nlm_file	*file;
@@ -239,12 +248,14 @@ nlm_traverse_files(struct nlm_host *host, nlm_host_match_fn_t match)
 	mutex_lock(&nlm_file_mutex);
 	for (i = 0; i < FILE_NRHASH; i++) {
 		hlist_for_each_entry_safe(file, pos, next, &nlm_files[i], f_list) {
+			if (is_failover_file && !is_failover_file(data, file))
+				continue;
 			file->f_count++;
 			mutex_unlock(&nlm_file_mutex);
 
 			/* Traverse locks, blocks and shares of this file
 			 * and update file->f_locks count */
-			if (nlm_inspect_file(host, file, match))
+			if (nlm_inspect_file(data, file, match))
 				ret = 1;
 
 			mutex_lock(&nlm_file_mutex);
@@ -303,21 +314,27 @@ nlm_release_file(struct nlm_file *file)
  *	Used by nlmsvc_invalidate_all
  */
 static int
-nlmsvc_mark_host(struct nlm_host *host, struct nlm_host *dummy)
+nlmsvc_mark_host(void *data, struct nlm_host *dummy)
 {
+	struct nlm_host *host = data;
+
 	host->h_inuse = 1;
 	return 0;
 }
 
 static int
-nlmsvc_same_host(struct nlm_host *host, struct nlm_host *other)
+nlmsvc_same_host(void *data, struct nlm_host *other)
 {
+	struct nlm_host *host = data;
+
 	return host == other;
 }
 
 static int
-nlmsvc_is_client(struct nlm_host *host, struct nlm_host *dummy)
+nlmsvc_is_client(void *data, struct nlm_host *dummy)
 {
+	struct nlm_host *host = data;
+
 	if (host->h_server) {
 		/* we are destroying locks even though the client
 		 * hasn't asked us too, so don't unmonitor the
@@ -337,7 +354,7 @@ void
 nlmsvc_mark_resources(void)
 {
 	dprintk("lockd: nlmsvc_mark_resources\n");
-	nlm_traverse_files(NULL, nlmsvc_mark_host);
+	nlm_traverse_files(NULL, nlmsvc_mark_host, NULL);
 }
 
 /*
@@ -348,7 +365,7 @@ nlmsvc_free_host_resources(struct nlm_host *host)
 {
 	dprintk("lockd: nlmsvc_free_host_resources\n");
 
-	if (nlm_traverse_files(host, nlmsvc_same_host)) {
+	if (nlm_traverse_files(host, nlmsvc_same_host, NULL)) {
 		printk(KERN_WARNING
 			"lockd: couldn't remove all locks held by %s\n",
 			host->h_name);
@@ -368,5 +385,41 @@ nlmsvc_invalidate_all(void)
 	 * turn, which is about as inefficient as it gets.
 	 * Now we just do it once in nlm_traverse_files.
 	 */
-	nlm_traverse_files(NULL, nlmsvc_is_client);
+	nlm_traverse_files(NULL, nlmsvc_is_client, NULL);
+}
+
+static int
+nlmsvc_match_sb(void *datap, struct nlm_file *file)
+{
+	struct super_block *sb = datap;
+
+	return sb == file->f_file->f_path.mnt->mnt_sb;
+}
+
+int
+nlmsvc_unlock_all_by_sb(struct super_block *sb)
+{
+	int ret;
+
+	ret = nlm_traverse_files(sb, nlmsvc_always_match, nlmsvc_match_sb);
+	return ret ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(nlmsvc_unlock_all_by_sb);
+
+static int
+nlmsvc_match_ip(void *datap, struct nlm_host *host)
+{
+	__be32 *server_addr = datap;
+
+	return host->h_saddr.sin_addr.s_addr == *server_addr;
+}
+
+int
+nlmsvc_unlock_all_by_ip(__be32 server_addr)
+{
+	int ret;
+	ret = nlm_traverse_files(&server_addr, nlmsvc_match_ip, NULL);
+	return ret ? -EIO : 0;
+
 }
+EXPORT_SYMBOL_GPL(nlmsvc_unlock_all_by_ip);

trunk/fs/locks.c

@@ -224,7 +224,7 @@ static void locks_copy_private(struct file_lock *new, struct file_lock *fl)
 /*
  * Initialize a new lock from an existing file_lock structure.
  */
-static void __locks_copy_lock(struct file_lock *new, const struct file_lock *fl)
+void __locks_copy_lock(struct file_lock *new, const struct file_lock *fl)
 {
 	new->fl_owner = fl->fl_owner;
 	new->fl_pid = fl->fl_pid;
@@ -833,7 +833,7 @@ static int __posix_lock_file(struct inode *inode, struct file_lock *request, str
 			if (!posix_locks_conflict(request, fl))
 				continue;
 			if (conflock)
-				locks_copy_lock(conflock, fl);
+				__locks_copy_lock(conflock, fl);
 			error = -EAGAIN;
 			if (!(request->fl_flags & FL_SLEEP))
 				goto out;
@@ -1367,18 +1367,20 @@ int generic_setlease(struct file *filp, long arg, struct file_lock **flp)
 
 	lease = *flp;
 
-	error = -EAGAIN;
-	if ((arg == F_RDLCK) && (atomic_read(&inode->i_writecount) > 0))
-		goto out;
-	if ((arg == F_WRLCK)
-	    && ((atomic_read(&dentry->d_count) > 1)
-		|| (atomic_read(&inode->i_count) > 1)))
-		goto out;
+	if (arg != F_UNLCK) {
+		error = -ENOMEM;
+		new_fl = locks_alloc_lock();
+		if (new_fl == NULL)
+			goto out;
 
-	error = -ENOMEM;
-	new_fl = locks_alloc_lock();
-	if (new_fl == NULL)
-		goto out;
+		error = -EAGAIN;
+		if ((arg == F_RDLCK) && (atomic_read(&inode->i_writecount) > 0))
+			goto out;
+		if ((arg == F_WRLCK)
+		    && ((atomic_read(&dentry->d_count) > 1)
+			|| (atomic_read(&inode->i_count) > 1)))
+			goto out;
+	}
 
 	/*
 	 * At this point, we know that if there is an exclusive
@@ -1404,6 +1406,7 @@ int generic_setlease(struct file *filp, long arg, struct file_lock **flp)
 			rdlease_count++;
 	}
 
+	error = -EAGAIN;
 	if ((arg == F_RDLCK && (wrlease_count > 0)) ||
 	    (arg == F_WRLCK && ((rdlease_count + wrlease_count) > 0)))
 		goto out;
@@ -1490,8 +1493,7 @@ EXPORT_SYMBOL_GPL(vfs_setlease);
 int fcntl_setlease(unsigned int fd, struct file *filp, long arg)
 {
 	struct file_lock fl, *flp = &fl;
-	struct dentry *dentry = filp->f_path.dentry;
-	struct inode *inode = dentry->d_inode;
+	struct inode *inode = filp->f_path.dentry->d_inode;
 	int error;
 
 	locks_init_lock(&fl);

trunk/fs/nfsd/nfs4state.c

@@ -2712,9 +2712,6 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 	* Note: locks.c uses the BKL to protect the inode's lock list.
 	*/
 
-	/* XXX?: Just to divert the locks_release_private at the start of
-	 * locks_copy_lock: */
-	locks_init_lock(&conflock);
 	err = vfs_lock_file(filp, cmd, &file_lock, &conflock);
 	switch (-err) {
 	case 0: /* success! */

trunk/fs/nfsd/nfs4xdr.c

@@ -376,20 +376,6 @@ nfsd4_decode_fattr(struct nfsd4_compoundargs *argp, u32 *bmval, struct iattr *ia
 			goto xdr_error;
 		}
 	}
-	if (bmval[1] & FATTR4_WORD1_TIME_METADATA) {
-		/* We require the high 32 bits of 'seconds' to be 0, and we ignore
-		   all 32 bits of 'nseconds'. */
-		READ_BUF(12);
-		len += 12;
-		READ32(dummy32);
-		if (dummy32)
-			return nfserr_inval;
-		READ32(iattr->ia_ctime.tv_sec);
-		READ32(iattr->ia_ctime.tv_nsec);
-		if (iattr->ia_ctime.tv_nsec >= (u32)1000000000)
-			return nfserr_inval;
-		iattr->ia_valid |= ATTR_CTIME;
-	}
 	if (bmval[1] & FATTR4_WORD1_TIME_MODIFY_SET) {
 		READ_BUF(4);
 		len += 4;