---

yaml
---
r: 35145
b: refs/heads/master
c: 71bfe47
h: refs/heads/master
i:
  35143: 356e872
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: fd6746daade513bf7f887625c107878b6aacccfd
+refs/heads/master: 71bfe47f023c55c322607939b786ce0a44627dfc

trunk/Documentation/cpu-freq/user-guide.txt

@@ -153,13 +153,10 @@ scaling_governor,		and by "echoing" the name of another
 				that some governors won't load - they only
 				work on some specific architectures or
 				processors.
-scaling_min_freq and
+scaling_min_freq and 
 scaling_max_freq		show the current "policy limits" (in
 				kHz). By echoing new values into these
 				files, you can change these limits.
-				NOTE: when setting a policy you need to
-				first set scaling_max_freq, then
-				scaling_min_freq.
 
 
 If you have selected the "userspace" governor which allows you to

trunk/Documentation/kobject.txt

@@ -247,7 +247,7 @@ the object-specific fields, which include:
 - default_attrs: Default attributes to be exported via sysfs when the
   object is registered.Note that the last attribute has to be
   initialized to NULL ! You can find a complete implementation
-  in block/genhd.c
+  in drivers/block/genhd.c
 
 
 Instances of struct kobj_type are not registered; only referenced by

trunk/Documentation/networking/ip-sysctl.txt

@@ -294,15 +294,15 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 87380*2 bytes.
 
 tcp_mem - vector of 3 INTEGERs: min, pressure, max
-	min: below this number of pages TCP is not bothered about its
+	low: below this number of pages TCP is not bothered about its
 	memory appetite.
 
 	pressure: when amount of memory allocated by TCP exceeds this number
 	of pages, TCP moderates its memory consumption and enters memory
 	pressure mode, which is exited when memory consumption falls
-	under "min".
+	under "low".
 
-	max: number of pages allowed for queueing by all TCP sockets.
+	high: number of pages allowed for queueing by all TCP sockets.
 
 	Defaults are calculated at boot time from amount of available
 	memory.

trunk/Documentation/powerpc/booting-without-of.txt

@@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model.
     - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
     - compatible : Should be "gianfar"
     - reg : Offset and length of the register set for the device
-    - mac-address : List of bytes representing the ethernet address of
+    - address : List of bytes representing the ethernet address of
       this controller
     - interrupts : <a b> where a is the interrupt number and b is a
       field that represents an encoding of the sense and level
@@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model.
 		model = "TSEC";
 		compatible = "gianfar";
 		reg = <24000 1000>;
-		mac-address = [ 00 E0 0C 00 73 00 ];
+		address = [ 00 E0 0C 00 73 00 ];
 		interrupts = <d 3 e 3 12 3>;
 		interrupt-parent = <40000>;
 		phy-handle = <2452000>
@@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			mac-address = [ 00 E0 0C 00 73 00 ];
+			address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 3 e 3 12 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452000>;
@@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			mac-address = [ 00 E0 0C 00 73 01 ];
+			address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 3 14 3 18 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452001>;
@@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node.
 			model = "FEC";
 			compatible = "gianfar";
 			reg = <26000 1000>;
-			mac-address = [ 00 E0 0C 00 73 02 ];
+			address = [ 00 E0 0C 00 73 02 ];
 			interrupts = <19 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452002>;

trunk/Documentation/sysctl/kernel.txt

@@ -211,8 +211,9 @@ Controls the kernel's behaviour when an oops or BUG is encountered.
 
 0: try to continue operation
 
-1: panic immediatly.  If the `panic' sysctl is also non-zero then the
-   machine will be rebooted.
+1: delay a few seconds (to give klogd time to record the oops output) and
+   then panic.  If the `panic' sysctl is also non-zero then the machine will
+   be rebooted.
 
 ==============================================================
 

trunk/MAINTAINERS

@@ -298,13 +298,6 @@ L:	info-linux@geode.amd.com
 W:	http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
 S:	Supported
 
-AOA (Apple Onboard Audio) ALSA DRIVER
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
-L:	linuxppc-dev@ozlabs.org
-L:	alsa-devel@alsa-project.org
-S:	Maintained
-
 APM DRIVER
 P:	Stephen Rothwell
 M:	sfr@canb.auug.org.au
@@ -2360,12 +2353,6 @@ M:	linux-driver@qlogic.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 
-QLOGIC QLA3XXX NETWORK DRIVER
-P:	Ron Mercer
-M:	linux-driver@qlogic.com
-L:	netdev@vger.kernel.org
-S:	Supported
-
 QNX4 FILESYSTEM
 P:	Anders Larsen
 M:	al@alarsen.net
@@ -2666,22 +2653,6 @@ M:	dbrownell@users.sourceforge.net
 L:	spi-devel-general@lists.sourceforge.net
 S:	Maintained
 
-STABLE BRANCH:
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
-L:	stable@kernel.org
-S:	Maintained
-
-STABLE BRANCH:
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
-L:	stable@kernel.org
-S:	Maintained
-
 TPM DEVICE DRIVER
 P:	Kylene Hall
 M:	kjhall@us.ibm.com

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 18
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc3
 NAME=Crazed Snow-Weasel
 
 # *DOCUMENTATION*
@@ -309,6 +309,9 @@ CPPFLAGS        := -D__KERNEL__ $(LINUXINCLUDE)
 
 CFLAGS          := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
                    -fno-strict-aliasing -fno-common
+# Force gcc to behave correct even for buggy distributions
+CFLAGS          += $(call cc-option, -fno-stack-protector)
+
 AFLAGS          := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -433,13 +436,12 @@ core-y		:= usr/
 endif # KBUILD_EXTMOD
 
 ifeq ($(dot-config),1)
-# Read in config
--include include/config/auto.conf
+# In this section, we need .config
 
-ifeq ($(KBUILD_EXTMOD),)
 # Read in dependencies to all Kconfig* files, make sure to run
 # oldconfig if changes are detected.
 -include include/config/auto.conf.cmd
+-include include/config/auto.conf
 
 # To avoid any implicit rule to kick in, define an empty command
 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
@@ -449,27 +451,16 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 # we execute the config step to be sure to catch updated Kconfig files
 include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+ifeq ($(KBUILD_EXTMOD),)
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
-# external modules needs include/linux/autoconf.h and include/config/auto.conf
-# but do not care if they are up-to-date. Use auto.conf to trigger the test
-PHONY += include/config/auto.conf
-
-include/config/auto.conf:
-	$(Q)test -e include/linux/autoconf.h -a -e $@ || (		\
-	echo;								\
-	echo "  ERROR: Kernel configuration is invalid.";		\
-	echo "         include/linux/autoconf.h or $@ are missing.";	\
-	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
-	echo;								\
-	/bin/false)
-
-endif # KBUILD_EXTMOD
+	$(error kernel configuration not valid - run 'make prepare' in $(srctree) to update it)
+endif
 
 else
 # Dummy target needed, because used as prerequisite
 include/config/auto.conf: ;
-endif # $(dot-config)
+endif
 
 # The all: target is the default when no target is given on the
 # command line.
@@ -483,8 +474,6 @@ else
 CFLAGS		+= -O2
 endif
 
-include $(srctree)/arch/$(ARCH)/Makefile
-
 ifdef CONFIG_FRAME_POINTER
 CFLAGS		+= -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
 else
@@ -499,8 +488,7 @@ ifdef CONFIG_DEBUG_INFO
 CFLAGS		+= -g
 endif
 
-# Force gcc to behave correct even for buggy distributions
-CFLAGS          += $(call cc-option, -fno-stack-protector)
+include $(srctree)/arch/$(ARCH)/Makefile
 
 # arch Makefile may override CC so keep this after arch Makefile is included
 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)

trunk/arch/arm/common/rtctime.c

@@ -68,7 +68,6 @@ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc
 		rtc_time_to_tm(next_time, next);
 	}
 }
-EXPORT_SYMBOL(rtc_next_alarm_time);
 
 static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
 {

trunk/arch/arm/kernel/traps.c

@@ -233,7 +233,7 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	spin_unlock_irq(&die_lock);
 
 	if (panic_on_oops)
-		panic("Fatal exception");
+		panic("Fatal exception: panic_on_oops");
 
 	do_exit(SIGSEGV);
 }

trunk/arch/arm/mach-ixp4xx/common-pci.c

@@ -532,6 +532,8 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 	return -EIO;
 }
 
+EXPORT_SYMBOL(pci_set_dma_mask);
+EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 

trunk/arch/arm/mach-ixp4xx/gtwx5715-setup.c

@@ -107,9 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = {
 	.width		= 2,
 };
 
-static struct resource gtwx5715_flash_resource = {
+static struct gtw5715_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-};
+}
 
 static struct platform_device gtwx5715_flash = {
 	.name		= "IXP4XX-Flash",
@@ -130,6 +130,9 @@ static void __init gtwx5715_init(void)
 {
 	ixp4xx_sys_init();
 
+	if (!flash_resource)
+		printk(KERN_ERR "Could not allocate flash resource\n");
+
 	gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
 

trunk/arch/i386/kernel/cpu/cpufreq/Kconfig

@@ -96,7 +96,6 @@ config X86_POWERNOW_K8_ACPI
 
 config X86_GX_SUSPMOD
 	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
-	depends on PCI
 	help
 	 This add the CPUFreq driver for NatSemi Geode processors which
 	 support suspend modulation.
@@ -203,7 +202,7 @@ config X86_LONGRUN
 config X86_LONGHAUL
 	tristate "VIA Cyrix III Longhaul"
 	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
+	depends on BROKEN
 	help
 	  This adds the CPUFreq driver for VIA Samuel/CyrixIII,
 	  VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T

trunk/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c

@@ -384,7 +384,8 @@ static int acpi_cpufreq_early_init_acpi(void)
 	}
 
 	/* Do initialization in ACPI core */
-	return acpi_processor_preregister_performance(acpi_perf_data);
+	acpi_processor_preregister_performance(acpi_perf_data);
+	return 0;
 }
 
 static int