---

yaml
---
r: 265575
b: refs/heads/master
c: 224cf5a
h: refs/heads/master
i:
  265573: ad2c20c
  265571: ebbed28
  265567: a7a6e46
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: aab3ac26108642eaa06efa4697dab595c7de2bbd
+refs/heads/master: 224cf5ad14c038b13c119dff29422f178a306f54

trunk/MAINTAINERS

@@ -5066,7 +5066,7 @@ PPP PROTOCOL DRIVERS AND COMPRESSORS
 M:	Paul Mackerras <paulus@samba.org>
 L:	linux-ppp@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ppp_*
+F:	drivers/net/ppp/ppp_*
 
 PPP OVER ATM (RFC 2364)
 M:	Mitchell Blank Jr <mitch@sfgoth.com>
@@ -5077,8 +5077,8 @@ F:	include/linux/atmppp.h
 PPP OVER ETHERNET
 M:	Michal Ostrowski <mostrows@earthlink.net>
 S:	Maintained
-F:	drivers/net/pppoe.c
-F:	drivers/net/pppox.c
+F:	drivers/net/ppp/pppoe.c
+F:	drivers/net/ppp/pppox.c
 
 PPP OVER L2TP
 M:	James Chapman <jchapman@katalix.com>
@@ -5099,7 +5099,7 @@ PPTP DRIVER
 M:	Dmitry Kozlov <xeb@mail.ru>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/pptp.c
+F:	drivers/net/ppp/pptp.c
 W:	http://sourceforge.net/projects/accel-pptp
 
 PREEMPTIBLE KERNEL

trunk/drivers/net/Kconfig

@@ -207,6 +207,8 @@ source "drivers/net/usb/Kconfig"
 
 source "drivers/net/pcmcia/Kconfig"
 
+source "drivers/net/ppp/Kconfig"
+
 source "drivers/net/wan/Kconfig"
 
 source "drivers/atm/Kconfig"
@@ -337,174 +339,6 @@ config PLIP
 	  will be called plip. If unsure, say Y or M, in case you buy
 	  a laptop later.
 
-config PPP
-	tristate "PPP (point-to-point protocol) support"
-	select SLHC
-	---help---
-	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
-	  the same purpose: sending Internet traffic over telephone (and other
-	  serial) lines.  Ask your access provider if they support it, because
-	  otherwise you can't use it; most Internet access providers these
-	  days support PPP rather than SLIP.
-
-	  To use PPP, you need an additional program called pppd as described
-	  in the PPP-HOWTO, available at
-	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
-	  the version of pppd recommended in <file:Documentation/Changes>.
-	  The PPP option enlarges your kernel by about 16 KB.
-
-	  There are actually two versions of PPP: the traditional PPP for
-	  asynchronous lines, such as regular analog phone lines, and
-	  synchronous PPP which can be used over digital ISDN lines for
-	  example.  If you want to use PPP over phone lines or other
-	  asynchronous serial lines, you need to say Y (or M) here and also to
-	  the next option, "PPP support for async serial ports".  For PPP over
-	  synchronous lines, you should say Y (or M) here and to "Support
-	  synchronous PPP", below.
-
-	  If you said Y to "Version information on all symbols" above, then
-	  you cannot compile the PPP driver into the kernel; you can then only
-	  compile it as a module. To compile this driver as a module, choose M
-	  here. The module will be called ppp_generic.
-
-config PPP_MULTILINK
-	bool "PPP multilink support (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
-	help
-	  PPP multilink is a protocol (defined in RFC 1990) which allows you
-	  to combine several (logical or physical) lines into one logical PPP
-	  connection, so that you can utilize your full bandwidth.
-
-	  This has to be supported at the other end as well and you need a
-	  version of the pppd daemon which understands the multilink protocol.
-
-	  If unsure, say N.
-
-config PPP_FILTER
-	bool "PPP filtering"
-	depends on PPP
-	help
-	  Say Y here if you want to be able to filter the packets passing over
-	  PPP interfaces.  This allows you to control which packets count as
-	  activity (i.e. which packets will reset the idle timer or bring up
-	  a demand-dialed link) and which packets are to be dropped entirely.
-	  You need to say Y here if you wish to use the pass-filter and
-	  active-filter options to pppd.
-
-	  If unsure, say N.
-
-config PPP_ASYNC
-	tristate "PPP support for async serial ports"
-	depends on PPP
-	select CRC_CCITT
-	---help---
-	  Say Y (or M) here if you want to be able to use PPP over standard
-	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
-	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
-	  need this option.
-
-	  To compile this driver as a module, choose M here.
-
-	  If unsure, say Y.
-
-config PPP_SYNC_TTY
-	tristate "PPP support for sync tty ports"
-	depends on PPP
-	help
-	  Say Y (or M) here if you want to be able to use PPP over synchronous
-	  (HDLC) tty devices, such as the SyncLink adapter. These devices
-	  are often used for high-speed leased lines like T1/E1.
-
-	  To compile this driver as a module, choose M here.
-
-config PPP_DEFLATE
-	tristate "PPP Deflate compression"
-	depends on PPP
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	---help---
-	  Support for the Deflate compression method for PPP, which uses the
-	  Deflate algorithm (the same algorithm that gzip uses) to compress
-	  each PPP packet before it is sent over the wire.  The machine at the
-	  other end of the PPP link (usually your ISP) has to support the
-	  Deflate compression method as well for this to be useful.  Even if
-	  they don't support it, it is safe to say Y here.
-
-	  To compile this driver as a module, choose M here.
-
-config PPP_BSDCOMP
-	tristate "PPP BSD-Compress compression"
-	depends on PPP
-	---help---
-	  Support for the BSD-Compress compression method for PPP, which uses
-	  the LZW compression method to compress each PPP packet before it is
-	  sent over the wire. The machine at the other end of the PPP link
-	  (usually your ISP) has to support the BSD-Compress compression
-	  method as well for this to be useful. Even if they don't support it,
-	  it is safe to say Y here.
-
-	  The PPP Deflate compression method ("PPP Deflate compression",
-	  above) is preferable to BSD-Compress, because it compresses better
-	  and is patent-free.
-
-	  Note that the BSD compression code will always be compiled as a
-	  module; it is called bsd_comp and will show up in the directory
-	  modules once you have said "make modules". If unsure, say N.
-
-config PPP_MPPE
-	tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
-	select CRYPTO
-	select CRYPTO_SHA1
-	select CRYPTO_ARC4
-	select CRYPTO_ECB
-	---help---
-	  Support for the MPPE Encryption protocol, as employed by the
-	  Microsoft Point-to-Point Tunneling Protocol.
-
-	  See http://pptpclient.sourceforge.net/ for information on
-	  configuring PPTP clients and servers to utilize this method.
-
-config PPPOE
-	tristate "PPP over Ethernet (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP
-	help
-	  Support for PPP over Ethernet.
-
-	  This driver requires the latest version of pppd from the CVS
-	  repository at cvs.samba.org.  Alternatively, see the 
-	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
-	  which contains instruction on how to use this driver (under 
-	  the heading "Kernel mode PPPoE").
-
-config PPTP
-	tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
-	help
-	  Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
-
-	  This driver requires pppd plugin to work in client mode or
-	  modified pptpd (poptop) to work in server mode.
-	  See http://accel-pptp.sourceforge.net/ for information how to
-	  utilize this module.
-
-config PPPOATM
-	tristate "PPP over ATM"
-	depends on ATM && PPP
-	help
-	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
-	  This implementation does not yet comply with section 8 of RFC2364,
-	  which can lead to bad results if the ATM peer loses state and
-	  changes its encapsulation unilaterally.
-
-config PPPOL2TP
-	tristate "PPP over L2TP (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && L2TP && PPP
-	help
-	  Support for PPP-over-L2TP socket family. L2TP is a protocol
-	  used by ISPs and enterprises to tunnel PPP traffic over UDP
-	  tunnels. L2TP is replacing PPTP for VPN uses.
-
 config SLIP
 	tristate "SLIP (serial line) support"
 	---help---

trunk/drivers/net/Makefile

@@ -22,15 +22,6 @@ obj-$(CONFIG_RIONET) += rionet.o
 
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_PPP) += ppp_generic.o
-obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
-obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
-obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
-obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
-obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
-obj-$(CONFIG_PPPOL2TP) += pppox.o
-obj-$(CONFIG_PPTP) += pppox.o pptp.o
 obj-$(CONFIG_SLIP) += slip.o
 obj-$(CONFIG_SLHC) += slhc.o
 
@@ -48,6 +39,15 @@ obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_FDDI) += fddi/
+onj-$(CONFIG_PPP) += ppp/
+obj-$(CONFIG_PPP_ASYNC) += ppp/
+obj-$(CONFIG_PPP_BSDCOMP) += ppp/
+obj-$(CONFIG_PPP_DEFLATE) += ppp/
+obj-$(CONFIG_PPP_MPPE) += ppp/
+obj-$(CONFIG_PPP_SYNC_TTY) += ppp/
+obj-$(CONFIG_PPPOE) += ppp/
+obj-$(CONFIG_PPPOL2TP) += ppp/
+obj-$(CONFIG_PPTP) += ppp/
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
 obj-$(CONFIG_ARCNET) += arcnet/