---

yaml --- r: 362095 b: refs/heads/master c: 9beb09f h: refs/heads/master i: 362093: fe3a055 362091: e8af753 362087: 6b4a404 362079: d94c42d v: v3
git-mirror · Mar 27, 2013 · 212c7b9 · 212c7b9
1 parent 4d4972a
commit 212c7b9
Show file tree

Hide file tree

Showing 637 changed files with 3,250 additions and 5,756 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 57f0d12ccb58b0d9328be1dc0ea9e7b538b84439
+refs/heads/master: 9beb09f1cadf33145c307c504f844ae24686c872
diff --git a/trunk/CREDITS b/trunk/CREDITS
@@ -1510,14 +1510,6 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
-N: Mark M. Hoffman
-E: mhoffman@lightlink.com
-D: asb100, lm93 and smsc47b397 hardware monitoring drivers
-D: hwmon subsystem core
-D: hwmon subsystem maintainer
-D: i2c-sis96x and i2c-stub SMBus drivers
-S: USA
-
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project

diff --git a/trunk/Documentation/devicetree/bindings/mfd/ab8500.txt b/trunk/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -13,6 +13,9 @@ Required parent device properties:
                                   4 = active high level-sensitive
                                   8 = active low level-sensitive
 
+Optional parent device properties:
+- reg                    : contains the PRCMU mailbox address for the AB8500 i2c port
+
 The AB8500 consists of a large and varied group of sub-devices:
 
 Device                     IRQ Names              Supply Names   Description
@@ -83,8 +86,9 @@ Non-standard child device properties:
    - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
    - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
 
-ab8500 {
+ab8500@5 {
          compatible = "stericsson,ab8500";
+         reg = <5>; /* mailbox 5 is i2c */
          interrupts = <0 40 0x4>;
          interrupt-controller;
          #interrupt-cells = <2>;

diff --git a/trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -11,9 +11,6 @@ Required properties:
 	- "nvidia,tegra20-uart"
 	- "nxp,lpc3220-uart"
 	- "ibm,qpace-nwp-serial"
-	- "altr,16550-FIFO32"
-	- "altr,16550-FIFO64"
-	- "altr,16550-FIFO128"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.

diff --git a/trunk/Documentation/hwmon/lm75 b/trunk/Documentation/hwmon/lm75
@@ -23,7 +23,7 @@ Supported chips:
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/
   * Microchip (TelCom) TCN75
-    Prefix: 'tcn75'
+    Prefix: 'lm75'
     Addresses scanned: none
     Datasheet: Publicly available at the Microchip website
                http://www.microchip.com/

diff --git a/trunk/Documentation/i2c/busses/i2c-diolan-u2c b/trunk/Documentation/i2c/busses/i2c-diolan-u2c
@@ -5,7 +5,7 @@ Supported adapters:
     Documentation:
 	http://www.diolan.com/i2c/u2c12.html
 
-Author: Guenter Roeck <linux@roeck-us.net>
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
 
 Description
 -----------

diff --git a/trunk/Documentation/input/alps.txt b/trunk/Documentation/input/alps.txt
@@ -3,26 +3,10 @@ ALPS Touchpad Protocol
 
 Introduction
 ------------
-Currently the ALPS touchpad driver supports five protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, 4 and 5.
-
-Since roughly mid-2010 several new ALPS touchpads have been released and
-integrated into a variety of laptops and netbooks.  These new touchpads
-have enough behavior differences that the alps_model_data definition
-table, describing the properties of the different versions, is no longer
-adequate.  The design choices were to re-define the alps_model_data
-table, with the risk of regression testing existing devices, or isolate
-the new devices outside of the alps_model_data table.  The latter design
-choice was made.  The new touchpad signatures are named: "Rushmore",
-"Pinnacle", and "Dolphin", which you will see in the alps.c code.
-For the purposes of this document, this group of ALPS touchpads will
-generically be called "new ALPS touchpads".
-
-We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
-(Compatibility ID) definition as a way to uniquely identify the
-different ALPS variants but there did not appear to be a 1:1 mapping.
-In fact, it appeared to be an m:n mapping between the _HID and actual
-hardware type.
+
+Currently the ALPS touchpad driver supports four protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
+protocol versions is contained in the following sections.
 
 Detection
 ---------
@@ -36,13 +20,9 @@ If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
 matched against known models in the alps_model_data_array.
 
-For older touchpads supporting protocol versions 3 and 4, the E7 report
-model signature is always 73-02-64. To differentiate between these
-versions, the response from the "Enter Command Mode" sequence must be
-inspected as described below.
-
-The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
-seem to be better differentiated by the EC Command Mode response.
+With protocol versions 3 and 4, the E7 report model signature is always
+73-02-64. To differentiate between these versions, the response from the
+"Enter Command Mode" sequence must be inspected as described below.
 
 Command Mode
 ------------
@@ -67,14 +47,6 @@ address of the register being read, and the third contains the value of the
 register. Registers are written by writing the value one nibble at a time
 using the same encoding used for addresses.
 
-For the new ALPS touchpads, the EC command is used to enter command
-mode. The response in the new ALPS touchpads is significantly different,
-and more important in determining the behavior.  This code has been
-separated from the original alps_model_data table and put in the
-alps_identify function.  For example, there seem to be two hardware init
-sequences for the "Dolphin" touchpads as determined by the second byte
-of the EC response.
-
 Packet Format
 -------------
 
@@ -215,28 +187,3 @@ There are several things worth noting here.
     well.
 
 So far no v4 devices with tracksticks have been encountered.
-
-ALPS Absolute Mode - Protocol Version 5
----------------------------------------
-This is basically Protocol Version 3 but with different logic for packet
-decode.  It uses the same alps_process_touchpad_packet_v3 call with a
-specialized decode_fields function pointer to correctly interpret the
-packets.  This appears to only be used by the Dolphin devices.
-
-For single-touch, the 6-byte packet format is:
-
- byte 0:    1    1    0    0    1    0    0    0
- byte 1:    0   x6   x5   x4   x3   x2   x1   x0
- byte 2:    0   y6   y5   y4   y3   y2   y1   y0
- byte 3:    0    M    R    L    1    m    r    l
- byte 4:   y10  y9   y8   y7  x10   x9   x8   x7
- byte 5:    0   z6   z5   z4   z3   z2   z1   z0
-
-For mt, the format is:
-
- byte 0:    1    1    1    n3   1   n2   n1   x24
- byte 1:    1   y7   y6    y5  y4   y3   y2    y1
- byte 2:    ?   x2   x1   y12 y11  y10   y9    y8
- byte 3:    0  x23  x22   x21 x20  x19  x18   x17
- byte 4:    0   x9   x8    x7  x6   x5   x4    x3
- byte 5:    0  x16  x15   x14 x13  x12  x11   x10
diff --git a/trunk/Documentation/networking/tuntap.txt b/trunk/Documentation/networking/tuntap.txt
@@ -105,83 +105,6 @@ Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
      Proto [2 bytes]
      Raw protocol(IP, IPv6, etc) frame.
 
-  3.3 Multiqueue tuntap interface:
-
-  From version 3.8, Linux supports multiqueue tuntap which can uses multiple
-  file descriptors (queues) to parallelize packets sending or receiving. The
-  device allocation is the same as before, and if user wants to create multiple
-  queues, TUNSETIFF with the same device name must be called many times with
-  IFF_MULTI_QUEUE flag.
-
-  char *dev should be the name of the device, queues is the number of queues to
-  be created, fds is used to store and return the file descriptors (queues)
-  created to the caller. Each file descriptor were served as the interface of a
-  queue which could be accessed by userspace.
-
-  #include <linux/if.h>
-  #include <linux/if_tun.h>
-
-  int tun_alloc_mq(char *dev, int queues, int *fds)
-  {
-      struct ifreq ifr;
-      int fd, err, i;
-
-      if (!dev)
-          return -1;
-
-      memset(&ifr, 0, sizeof(ifr));
-      /* Flags: IFF_TUN   - TUN device (no Ethernet headers)
-       *        IFF_TAP   - TAP device
-       *
-       *        IFF_NO_PI - Do not provide packet information
-       *        IFF_MULTI_QUEUE - Create a queue of multiqueue device
-       */
-      ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE;
-      strcpy(ifr.ifr_name, dev);
-
-      for (i = 0; i < queues; i++) {
-          if ((fd = open("/dev/net/tun", O_RDWR)) < 0)
-             goto err;
-          err = ioctl(fd, TUNSETIFF, (void *)&ifr);
-          if (err) {
-             close(fd);
-             goto err;
-          }
-          fds[i] = fd;
-      }
-
-      return 0;
-  err:
-      for (--i; i >= 0; i--)
-          close(fds[i]);
-      return err;
-  }
-
-  A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When
-  calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when
-  calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were
-  enabled by default after it was created through TUNSETIFF.
-
-  fd is the file descriptor (queue) that we want to enable or disable, when
-  enable is true we enable it, otherwise we disable it
-
-  #include <linux/if.h>
-  #include <linux/if_tun.h>
-
-  int tun_set_queue(int fd, int enable)
-  {
-      struct ifreq ifr;
-
-      memset(&ifr, 0, sizeof(ifr));
-
-      if (enable)
-         ifr.ifr_flags = IFF_ATTACH_QUEUE;
-      else
-         ifr.ifr_flags = IFF_DETACH_QUEUE;
-
-      return ioctl(fd, TUNSETQUEUE, (void *)&ifr);
-  }
-
 Universal TUN/TAP device driver Frequently Asked Question.
 
 1. What platforms are supported by TUN/TAP driver ?

diff --git a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -912,7 +912,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     models depending on the codec chip.  The list of available models
     is found in HD-Audio-Models.txt
 
-    The model name "generic" is treated as a special case.  When this
+    The model name "genric" is treated as a special case.  When this
     model is given, the driver uses the generic codec parser without
     "codec-patch".  It's sometimes good for testing and debugging.
 

diff --git a/trunk/Documentation/sound/alsa/seq_oss.html b/trunk/Documentation/sound/alsa/seq_oss.html
@@ -285,7 +285,7 @@ <H4>
 <H4>
 7.2.4 Close Callback</H4>
 The <TT>close</TT> callback is called when this device is closed by the
-application. If any private data was allocated in open callback, it must
+applicaion. If any private data was allocated in open callback, it must
 be released in the close callback. The deletion of ALSA port should be
 done here, too. This callback must not be NULL.
 <H4>

diff --git a/trunk/Documentation/trace/ftrace.txt b/trunk/Documentation/trace/ftrace.txt
@@ -1873,7 +1873,7 @@ feature:
 
 	status\input  |     0      |     1      |    else    |
 	--------------+------------+------------+------------+
-	not allocated |(do nothing)| alloc+swap |(do nothing)|
+	not allocated |(do nothing)| alloc+swap |   EINVAL   |
 	--------------+------------+------------+------------+
 	allocated     |    free    |    swap    |   clear    |
 	--------------+------------+------------+------------+