---

yaml
---
r: 174323
b: refs/heads/master
c: ebfaf1f
h: refs/heads/master
i:
  174321: 87e7e2b
  174319: 81b4457
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d07ca4ad2f67ebb1bf48a2308a7a0cd81ef8f70a
+refs/heads/master: ebfaf1fbb6010204e973e329034d0004d6521503

trunk/drivers/hwmon/adt7475.c

@@ -80,6 +80,8 @@
 
 #define REG_TEMP_OFFSET_BASE	0x70
 
+#define REG_CONFIG2		0x73
+
 #define REG_EXTEND1		0x76
 #define REG_EXTEND2		0x77
 
@@ -92,11 +94,15 @@
 #define REG_VTT_MIN		0x84	/* ADT7490 only */
 #define REG_VTT_MAX		0x86	/* ADT7490 only */
 
+#define CONFIG2_ATTN		0x20
+
 #define CONFIG3_SMBALERT	0x01
 #define CONFIG3_THERM		0x02
 
 #define CONFIG4_PINFUNC		0x03
 #define CONFIG4_MAXDUTY		0x08
+#define CONFIG4_ATTN_IN10	0x30
+#define CONFIG4_ATTN_IN43	0xC0
 
 #define CONFIG5_TWOSCOMP	0x01
 #define CONFIG5_TEMPOFFSET	0x02
@@ -157,6 +163,7 @@ struct adt7475_data {
 	u8 config4;
 	u8 config5;
 	u8 has_voltage;
+	u8 bypass_attn;		/* Bypass voltage attenuator */
 	u8 has_pwm2:1;
 	u8 has_fan4:1;
 	u32 alarms;
@@ -233,19 +240,24 @@ static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = {
 	{ 45, 45 },	/* Vtt */
 };
 
-static inline int reg2volt(int channel, u16 reg)
+static inline int reg2volt(int channel, u16 reg, u8 bypass_attn)
 {
 	const int *r = adt7473_in_scaling[channel];
 
+	if (bypass_attn & (1 << channel))
+		return DIV_ROUND_CLOSEST(reg * 2250, 1024);
 	return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024);
 }
 
-static inline u16 volt2reg(int channel, long volt)
+static inline u16 volt2reg(int channel, long volt, u8 bypass_attn)
 {
 	const int *r = adt7473_in_scaling[channel];
 	long reg;
 
-	reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
+	if (bypass_attn & (1 << channel))
+		reg = (volt * 1024) / 2250;
+	else
+		reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
 	return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2);
 }
 
@@ -305,7 +317,8 @@ static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
 			       (data->alarms >> sattr->index) & 1);
 	default:
 		val = data->voltage[sattr->nr][sattr->index];
-		return sprintf(buf, "%d\n", reg2volt(sattr->index, val));
+		return sprintf(buf, "%d\n",
+			       reg2volt(sattr->index, val, data->bypass_attn));
 	}
 }
 
@@ -324,7 +337,8 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
 
 	mutex_lock(&data->lock);
 
-	data->voltage[sattr->nr][sattr->index] = volt2reg(sattr->index, val);
+	data->voltage[sattr->nr][sattr->index] =
+				volt2reg(sattr->index, val, data->bypass_attn);
 
 	if (sattr->index < ADT7475_VOLTAGE_COUNT) {
 		if (sattr->nr == MIN)
@@ -1159,7 +1173,7 @@ static int adt7475_probe(struct i2c_client *client,
 
 	struct adt7475_data *data;
 	int i, ret = 0, revision;
-	u8 config3;
+	u8 config2, config3;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
@@ -1205,6 +1219,16 @@ static int adt7475_probe(struct i2c_client *client,
 			data->has_voltage |= (1 << 0);		/* in0 */
 	}
 
+	/* Voltage attenuators can be bypassed, globally or individually */
+	config2 = adt7475_read(REG_CONFIG2);
+	if (config2 & CONFIG2_ATTN) {
+		data->bypass_attn = (0x3 << 3) | 0x3;
+	} else {
+		data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
+				    ((data->config4 & CONFIG4_ATTN_IN43) >> 3);
+	}
+	data->bypass_attn &= data->has_voltage;
+
 	/* Call adt7475_read_pwm for all pwm's as this will reprogram any
 	   pwm's which are disabled to manual mode with 0% duty cycle */
 	for (i = 0; i < ADT7475_PWM_COUNT; i++)
@@ -1251,6 +1275,12 @@ static int adt7475_probe(struct i2c_client *client,
 			 (data->has_voltage & (1 << 0)) ? " in0" : "",
 			 data->has_fan4 ? " fan4" : "",
 			 data->has_pwm2 ? " pwm2" : "");
+	if (data->bypass_attn)
+		dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n",
+			 (data->bypass_attn & (1 << 0)) ? " in0" : "",
+			 (data->bypass_attn & (1 << 1)) ? " in1" : "",
+			 (data->bypass_attn & (1 << 3)) ? " in3" : "",
+			 (data->bypass_attn & (1 << 4)) ? " in4" : "");
 
 	return 0;