---

yaml
---
r: 149247
b: refs/heads/master
c: 87c4122
h: refs/heads/master
i:
  149245: 04747c3
  149243: c71b512
  149239: 6859509
  149231: ba8166d
  149215: 5c45b93
  149183: f6ae78e
  149119: 2ac15d8
  148991: 8c49d47
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ecc558acaba9ca1c6e2e7b54a1edb73ee391ae17
+refs/heads/master: 87c4122f1714f96faa1b1c9449f762b9c56f77e4

trunk/arch/arm/mach-s3c6410/Kconfig

@@ -77,3 +77,12 @@ config SMDK6410_WM1190_EV1
 	  module into the kernel.  The presence of the module will be
 	  detected at runtime so the the resulting kernel can be used
 	  with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP

trunk/arch/arm/mach-s3c6410/Makefile

@@ -21,3 +21,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 # machine support
 
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o

trunk/arch/arm/mach-s3c6410/mach-ncp.c

@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+struct map_desc ncp_iodesc[] = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END