m68knommu: make 5249 QSPI platform addressing consistent

If we make all QSPI (SPI protocol) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and code and use a single setup for all.

So modify the ColdFire 5249 QSPI addressing so that:

. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
. move chip select definitions (CS) to appropriate header

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

arch/m68k/include/asm/m5249sim.h

@@ -79,6 +79,17 @@
 #define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
 #define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
 
+/*
+ *	QSPI module.
+ */
+#define	MCFQSPI_BASE		(MCF_MBAR + 0x300)	/* Base address QSPI */
+#define	MCFQSPI_SIZE		0x40			/* Register set size */
+
+#define	MCFQSPI_CS0		29
+#define	MCFQSPI_CS1		24
+#define	MCFQSPI_CS2		21
+#define	MCFQSPI_CS3		22
+
 /*
  *	DMA unit base addresses.
  */

arch/m68k/include/asm/mcfqspi.h

@@ -23,8 +23,6 @@
 
 #if defined(CONFIG_M527x) || defined(CONFIG_M528x)
 #define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
-#elif defined(CONFIG_M5249)
-#define MCFQSPI_IOBASE         (MCF_MBAR + 0x300)
 #elif defined(CONFIG_M532x)
 #define MCFQSPI_IOBASE         0xFC058000
 #endif

arch/m68k/platform/5249/config.c

@@ -48,8 +48,8 @@ static struct platform_device m5249_smc91x = {
 #if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
 static struct resource m5249_qspi_resources[] = {
 	{
-		.start		= MCFQSPI_IOBASE,
-		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.start		= MCFQSPI_BASE,
+		.end		= MCFQSPI_BASE + MCFQSPI_SIZE - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -59,11 +59,6 @@ static struct resource m5249_qspi_resources[] = {
 	},
 };
 
-#define MCFQSPI_CS0    29
-#define MCFQSPI_CS1    24
-#define MCFQSPI_CS2    21
-#define MCFQSPI_CS3    22
-
 static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
 {
 	int status;