---

yaml --- r: 106915 b: refs/heads/master c: b8d317d h: refs/heads/master i: 106913: 3bec079 106911: d9d666b v: v3
git-mirror · Jul 26, 2008 · 24f4b7d · 24f4b7d
1 parent 7e0e618
commit 24f4b7d
Show file tree

Hide file tree

Showing 2,003 changed files with 23,116 additions and 66,762 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3684a601e4273692b6c80b86e55c728aef675660
+refs/heads/master: b8d317d10cca76cabe6b03ebfeb23cc99118b731
diff --git a/trunk/Documentation/DMA-API.txt b/trunk/Documentation/DMA-API.txt
@@ -298,10 +298,10 @@ recommended that you never use these unless you really know what the
 cache width is.
 
 int
-dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+dma_mapping_error(dma_addr_t dma_addr)
 
 int
-pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
+pci_dma_mapping_error(dma_addr_t dma_addr)
 
 In some circumstances dma_map_single and dma_map_page will fail to create
 a mapping. A driver can check for these errors by testing the returned

diff --git a/trunk/Documentation/Intel-IOMMU.txt b/trunk/Documentation/Intel-IOMMU.txt
@@ -48,7 +48,7 @@ IOVA generation is pretty generic. We used the same technique as vmalloc()
 but these are not global address spaces, but separate for each domain.
 Different DMA engines may support different number of domains.
 
-We also allocate guard pages with each mapping, so we can attempt to catch
+We also allocate gaurd pages with each mapping, so we can attempt to catch
 any overflow that might happen.
 
 
@@ -112,4 +112,4 @@ TBD
 
 - For compatibility testing, could use unity map domain for all devices, just
   provide a 1-1 for all useful memory under a single domain for all devices.
-- API for paravirt ops for abstracting functionality for VMM folks.
+- API for paravirt ops for abstracting functionlity for VMM folks.
diff --git a/trunk/Documentation/SubmittingPatches b/trunk/Documentation/SubmittingPatches
@@ -528,33 +528,7 @@ See more details on the proper patch format in the following
 references.
 
 
-16) Sending "git pull" requests  (from Linus emails)
 
-Please write the git repo address and branch name alone on the same line
-so that I can't even by mistake pull from the wrong branch, and so
-that a triple-click just selects the whole thing.
-
-So the proper format is something along the lines of:
-
-	"Please pull from
-
-		git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
-
-	 to get these changes:"
-
-so that I don't have to hunt-and-peck for the address and inevitably
-get it wrong (actually, I've only gotten it wrong a few times, and
-checking against the diffstat tells me when I get it wrong, but I'm
-just a lot more comfortable when I don't have to "look for" the right
-thing to pull, and double-check that I have the right branch-name).
-
-
-Please use "git diff -M --stat --summary" to generate the diffstat:
-the -M enables rename detection, and the summary enables a summary of
-new/deleted or renamed files.
-
-With rename detection, the statistics are rather different [...]
-because git will notice that a fair number of the changes are renames.
 
 -----------------------------------
 SECTION 2 - HINTS, TIPS, AND TRICKS

diff --git a/trunk/Documentation/accounting/taskstats-struct.txt b/trunk/Documentation/accounting/taskstats-struct.txt
@@ -6,7 +6,7 @@ This document contains an explanation of the struct taskstats fields.
 There are three different groups of fields in the struct taskstats:
 
 1) Common and basic accounting fields
-    If CONFIG_TASKSTATS is set, the taskstats interface is enabled and
+    If CONFIG_TASKSTATS is set, the taskstats inteface is enabled and
     the common fields and basic accounting fields are collected for
     delivery at do_exit() of a task.
 2) Delay accounting fields

diff --git a/trunk/Documentation/arm/Interrupts b/trunk/Documentation/arm/Interrupts
@@ -138,8 +138,14 @@ So, what's changed?
 
                 Set active the IRQ edge(s)/level.  This replaces the
                 SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
-                function.  Type should be one of IRQ_TYPE_xxx defined in
-		<linux/irq.h>
+                function.  Type should be one of the following:
+
+                #define IRQT_NOEDGE     (0)
+                #define IRQT_RISING     (__IRQT_RISEDGE)
+                #define IRQT_FALLING    (__IRQT_FALEDGE)
+                #define IRQT_BOTHEDGE   (__IRQT_RISEDGE|__IRQT_FALEDGE)
+                #define IRQT_LOW        (__IRQT_LOWLVL)
+                #define IRQT_HIGH       (__IRQT_HIGHLVL)
 
 3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.
 

diff --git a/trunk/Documentation/cpu-freq/governors.txt b/trunk/Documentation/cpu-freq/governors.txt
@@ -122,7 +122,7 @@ around '10000' or more.
 show_sampling_rate_(min|max): the minimum and maximum sampling rates
 available that you may set 'sampling_rate' to.
 
-up_threshold: defines what the average CPU usage between the samplings
+up_threshold: defines what the average CPU usaged between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
 to its default value of '80' it means that between the checking

diff --git a/trunk/Documentation/edac.txt b/trunk/Documentation/edac.txt
@@ -327,7 +327,7 @@ Sdram memory scrubbing rate:
 	'sdram_scrub_rate'
 
 	Read/Write attribute file that controls memory scrubbing. The scrubbing
-	rate is set by writing a minimum bandwidth in bytes/sec to the attribute
+	rate is set by writing a minimum bandwith in bytes/sec to the attribute
 	file. The rate will be translated to an internal value that gives at
 	least the specified rate.
 

diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
@@ -47,30 +47,6 @@ Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
-What:	old tuner-3036 i2c driver
-When:	2.6.28
-Why:	This driver is for VERY old i2c-over-parallel port teletext receiver
-	boxes. Rather then spending effort on converting this driver to V4L2,
-	and since it is extremely unlikely that anyone still uses one of these
-	devices, it was decided to drop it.
-Who:	Hans Verkuil <hverkuil@xs4all.nl>
-	Mauro Carvalho Chehab <mchehab@infradead.org>
-
- ---------------------------
-
-What:   V4L2 dpc7146 driver
-When:   2.6.28
-Why:    Old driver for the dpc7146 demonstration board that is no longer
-	relevant. The last time this was tested on actual hardware was
-	probably around 2002. Since this is a driver for a demonstration
-	board the decision was made to remove it rather than spending a
-	lot of effort continually updating this driver to stay in sync
-	with the latest internal V4L2 or I2C API.
-Who:    Hans Verkuil <hverkuil@xs4all.nl>
-	Mauro Carvalho Chehab <mchehab@infradead.org>
-
----------------------------
-
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c

diff --git a/trunk/Documentation/filesystems/omfs.txt b/trunk/Documentation/filesystems/omfs.txt
diff --git a/trunk/Documentation/filesystems/proc.txt b/trunk/Documentation/filesystems/proc.txt
@@ -931,7 +931,7 @@ group_prealloc  max_to_scan  mb_groups  mb_history  min_to_scan  order2_req
 stats  stream_req
 
 mb_groups:
-This file gives the details of multiblock allocator buddy cache of free blocks
+This file gives the details of mutiblock allocator buddy cache of free blocks
 
 mb_history:
 Multiblock allocation history.
@@ -1474,7 +1474,7 @@ used because pages_free(1355) is smaller than watermark + protection[2]
 normal page requirement. If requirement is DMA zone(index=0), protection[0]
 (=0) is used.
 
-zone[i]'s protection[j] is calculated by following expression.
+zone[i]'s protection[j] is calculated by following exprssion.
 
 (i < j):
   zone[i]->protection[j]

diff --git a/trunk/Documentation/filesystems/relay.txt b/trunk/Documentation/filesystems/relay.txt
@@ -294,16 +294,6 @@ user-defined data with a channel, and is immediately available
 (including in create_buf_file()) via chan->private_data or
 buf->chan->private_data.
 
-Buffer-only channels
---------------------
-
-These channels have no files associated and can be created with
-relay_open(NULL, NULL, ...). Such channels are useful in scenarios such
-as when doing early tracing in the kernel, before the VFS is up. In these
-cases, one may open a buffer-only channel and then call
-relay_late_setup_files() when the kernel is ready to handle files,
-to expose the buffered data to the userspace.
-
 Channel 'modes'
 ---------------
 

diff --git a/trunk/Documentation/filesystems/vfs.txt b/trunk/Documentation/filesystems/vfs.txt
@@ -143,7 +143,7 @@ struct file_system_type {
 
 The get_sb() method has the following arguments:
 
-  struct file_system_type *fs_type: describes the filesystem, partly initialized
+  struct file_system_type *fs_type: decribes the filesystem, partly initialized
   	by the specific filesystem code
 
   int flags: mount flags
@@ -895,9 +895,9 @@ struct dentry_operations {
 	iput() yourself
 
   d_dname: called when the pathname of a dentry should be generated.
-	Useful for some pseudo filesystems (sockfs, pipefs, ...) to delay
+	Usefull for some pseudo filesystems (sockfs, pipefs, ...) to delay
 	pathname generation. (Instead of doing it when dentry is created,
-	it's done only when the path is needed.). Real filesystems probably
+	its done only when the path is needed.). Real filesystems probably
 	dont want to use it, because their dentries are present in global
 	dcache hash, so their hash should be an invariant. As no lock is
 	held, d_dname() should not try to modify the dentry itself, unless