Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/…

…davem/net-2.6

Conflicts:

	net/mac80211/rc80211_pid_algo.c

MAINTAINERS

@@ -2039,43 +2039,19 @@ M:	kernel@wantstofly.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 
-INTEL PRO/100 ETHERNET SUPPORT
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
 P:	Auke Kok
 M:	auke-jan.h.kok@intel.com
 P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
 P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
+P:	Bruce Allan
+M:	bruce.w.allan@intel.com
 P:	John Ronciak
 M:	john.ronciak@intel.com
 L:	e1000-devel@lists.sourceforge.net
-W:	http://sourceforge.net/projects/e1000/
-S:	Supported
-
-INTEL PRO/1000 GIGABIT ETHERNET SUPPORT
-P:	Auke Kok
-M:	auke-jan.h.kok@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
-P:	Jeff Kirsher
-M:	jeffrey.t.kirsher@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
-L:	e1000-devel@lists.sourceforge.net
-W:	http://sourceforge.net/projects/e1000/
-S:	Supported
-
-INTEL PRO/10GbE SUPPORT
-P:	Ayyappan Veeraiyan
-M:	ayyappan.veeraiyan@intel.com
-P:	Auke Kok
-M:	auke-jan.h.kok@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
-L:	e1000-devel@lists.sourceforge.net
-W:	http://sourceforge.net/projects/e1000/
+W:	http://e1000.sourceforge.net/
 S:	Supported
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT

drivers/net/Kconfig

@@ -2519,7 +2519,7 @@ config CHELSIO_T3
 
 config EHEA
 	tristate "eHEA Ethernet support"
-	depends on IBMEBUS && INET
+	depends on IBMEBUS && INET && SPARSEMEM
 	select INET_LRO
 	---help---
 	  This driver supports the IBM pSeries eHEA ethernet adapter.

drivers/net/atarilance.c

@@ -336,8 +336,6 @@ struct lance_addr {
 
 /***************************** Prototypes *****************************/
 
-static int addr_accessible( volatile void *regp, int wordflag, int
-                            writeflag );
 static unsigned long lance_probe1( struct net_device *dev, struct lance_addr
                                    *init_rec );
 static int lance_open( struct net_device *dev );
@@ -406,7 +404,8 @@ struct net_device * __init atarilance_probe(int unit)
 
 /* Derived from hwreg_present() in atari/config.c: */
 
-static int __init addr_accessible( volatile void *regp, int wordflag, int writeflag )
+static noinline int __init addr_accessible(volatile void *regp, int wordflag,
+					   int writeflag)
 {
 	int		ret;
 	long	flags;

drivers/net/e100.c

@@ -2782,16 +2782,13 @@ static void __devexit e100_remove(struct pci_dev *pdev)
 	}
 }
 
-#ifdef CONFIG_PM
 static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct nic *nic = netdev_priv(netdev);
 
 	if (netif_running(netdev))
-		napi_disable(&nic->napi);
-	del_timer_sync(&nic->watchdog);
-	netif_carrier_off(nic->netdev);
+		e100_down(nic);
 	netif_device_detach(netdev);
 
 	pci_save_state(pdev);
@@ -2804,14 +2801,13 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
-	free_irq(pdev->irq, netdev);
-
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
 
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int e100_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
@@ -2832,26 +2828,7 @@ static int e100_resume(struct pci_dev *pdev)
 
 static void e100_shutdown(struct pci_dev *pdev)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct nic *nic = netdev_priv(netdev);
-
-	if (netif_running(netdev))
-		napi_disable(&nic->napi);
-	del_timer_sync(&nic->watchdog);
-	netif_carrier_off(nic->netdev);
-
-	if ((nic->flags & wol_magic) | e100_asf(nic)) {
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-		pci_enable_wake(pdev, PCI_D3cold, 1);
-	} else {
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_enable_wake(pdev, PCI_D3cold, 0);
-	}
-
-	free_irq(pdev->irq, netdev);
-
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
+	e100_suspend(pdev, PMSG_SUSPEND);
 }
 
 /* ------------------ PCI Error Recovery infrastructure  -------------- */

drivers/net/ixgbe/ixgbe_main.c

@@ -2133,7 +2133,7 @@ static void ixgbe_watchdog(unsigned long data)
 				(link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
 				 "10 Gbps" :
 				 (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
-				  "1 Gpbs" : "unknown speed")),
+				  "1 Gbps" : "unknown speed")),
 				((FLOW_RX && FLOW_TX) ? "RX/TX" :
 				 (FLOW_RX ? "RX" :
 				 (FLOW_TX ? "TX" : "None"))));

drivers/net/mv643xx_eth.c

@@ -2104,6 +2104,7 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR(	"Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani"
 		" and Dale Farnsworth");
 MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
+MODULE_ALIAS("platform:mv643xx_eth");
 
 /*
  * The second part is the low level driver of the gigE ethernet ports.

drivers/net/pcmcia/axnet_cs.c

@@ -1268,7 +1268,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id)
 		}
 	}
 
-	if (interrupts && ei_debug) 
+	if (interrupts && ei_debug > 3) 
 	{
 		handled = 1;
 		if (nr_serviced >= MAX_SERVICE) 

drivers/net/phy/Kconfig

@@ -67,6 +67,7 @@ config REALTEK_PHY
 
 config FIXED_PHY
 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+	depends on PHYLIB=y
 	---help---
 	  Adds the platform "fixed" MDIO Bus to cover the boards that use
 	  PHYs that are not connected to the real MDIO bus.

drivers/net/phy/davicom.c

@@ -37,6 +37,7 @@
 
 #define MII_DM9161_SCR		0x10
 #define MII_DM9161_SCR_INIT	0x0610
+#define MII_DM9161_SCR_RMII	0x0100
 
 /* DM9161 Interrupt Register */
 #define MII_DM9161_INTR	0x15
@@ -103,17 +104,27 @@ static int dm9161_config_aneg(struct phy_device *phydev)
 
 static int dm9161_config_init(struct phy_device *phydev)
 {
-	int err;
+	int err, temp;
 
 	/* Isolate the PHY */
 	err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
 
 	if (err < 0)
 		return err;
 
-	/* Do not bypass the scrambler/descrambler */
-	err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+	switch (phydev->interface) {
+	case PHY_INTERFACE_MODE_MII:
+		temp = MII_DM9161_SCR_INIT;
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		temp =  MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII;
+		break;
+	default:
+		return -EINVAL;
+	}
 
+	/* Do not bypass the scrambler/descrambler */
+	err = phy_write(phydev, MII_DM9161_SCR, temp);
 	if (err < 0)
 		return err;
 

drivers/net/pppol2tp.c

@@ -455,6 +455,7 @@ static void pppol2tp_recv_dequeue(struct pppol2tp_session *session)
 			       skb_queue_len(&session->reorder_q));
 			__skb_unlink(skb, &session->reorder_q);
 			kfree_skb(skb);
+			sock_put(session->sock);
 			continue;
 		}
 
@@ -1110,6 +1111,8 @@ static void pppol2tp_tunnel_closeall(struct pppol2tp_tunnel *tunnel)
 	for (hash = 0; hash < PPPOL2TP_HASH_SIZE; hash++) {
 again:
 		hlist_for_each_safe(walk, tmp, &tunnel->session_hlist[hash]) {
+			struct sk_buff *skb;
+
 			session = hlist_entry(walk, struct pppol2tp_session, hlist);
 
 			sk = session->sock;
@@ -1138,7 +1141,10 @@ static void pppol2tp_tunnel_closeall(struct pppol2tp_tunnel *tunnel)
 			/* Purge any queued data */
 			skb_queue_purge(&sk->sk_receive_queue);
 			skb_queue_purge(&sk->sk_write_queue);
-			skb_queue_purge(&session->reorder_q);
+			while ((skb = skb_dequeue(&session->reorder_q))) {
+				kfree_skb(skb);
+				sock_put(sk);
+			}
 
 			release_sock(sk);
 			sock_put(sk);

drivers/net/s2io.c

@@ -1088,7 +1088,7 @@ static int s2io_print_pci_mode(struct s2io_nic *nic)
  *  '-1' on failure
  */
 
-int init_tti(struct s2io_nic *nic, int link)
+static int init_tti(struct s2io_nic *nic, int link)
 {
 	struct XENA_dev_config __iomem *bar0 = nic->bar0;
 	register u64 val64 = 0;

drivers/net/tulip/de2104x.c

@@ -910,7 +910,8 @@ static void de_set_media (struct de_private *de)
 	unsigned media = de->media_type;
 	u32 macmode = dr32(MacMode);
 
-	BUG_ON(de_is_running(de));
+	if (de_is_running(de))
+		printk(KERN_WARNING "%s: chip is running while changing media!\n", de->dev->name);
 
 	if (de->de21040)
 		dw32(CSR11, FULL_DUPLEX_MAGIC);

drivers/net/tun.c

@@ -663,7 +663,11 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 	case SIOCSIFHWADDR:
 	{
 		/* try to set the actual net device's hw address */
-		int ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
+		int ret;
+
+		rtnl_lock();
+		ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
+		rtnl_unlock();
 
 		if (ret == 0) {
 			/** Set the character device's hardware address. This is used when

drivers/net/wireless/b43legacy/main.c

@@ -3870,7 +3870,7 @@ static void b43legacy_print_driverinfo(void)
 #ifdef CONFIG_B43LEGACY_DMA
 	feat_dma = "D";
 #endif
-	printk(KERN_INFO "Broadcom 43xx driver loaded "
+	printk(KERN_INFO "Broadcom 43xx-legacy driver loaded "
 	       "[ Features: %s%s%s%s%s, Firmware-ID: "
 	       B43legacy_SUPPORTED_FIRMWARE_ID " ]\n",
 	       feat_pci, feat_leds, feat_rfkill, feat_pio, feat_dma);

drivers/net/wireless/libertas/cmdresp.c

@@ -562,19 +562,17 @@ int lbs_process_rx_command(struct lbs_private *priv)
 	}
 
 	resp = (void *)priv->upld_buf;
-
-	curcmd = le16_to_cpu(resp->command);
-
+	curcmd = le16_to_cpu(priv->cur_cmd->cmdbuf->command);
 	respcmd = le16_to_cpu(resp->command);
 	result = le16_to_cpu(resp->result);
 
 	lbs_deb_cmd("CMD_RESP: response 0x%04x, seq %d, size %d, jiffies %lu\n",
 		     respcmd, le16_to_cpu(resp->seqnum), priv->upld_len, jiffies);
 	lbs_deb_hex(LBS_DEB_CMD, "CMD_RESP", (void *) resp, priv->upld_len);
 
-	if (resp->seqnum != resp->seqnum) {
+	if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) {
 		lbs_pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
-			    le16_to_cpu(resp->seqnum), le16_to_cpu(resp->seqnum));
+			    le16_to_cpu(resp->seqnum), le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		ret = -1;
 		goto done;

drivers/net/wireless/p54common.c

@@ -206,18 +206,23 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 	struct p54_common *priv = dev->priv;
 	struct eeprom_pda_wrap *wrap = NULL;
 	struct pda_entry *entry;
-	int i = 0;
 	unsigned int data_len, entry_len;
 	void *tmp;
 	int err;
+	u8 *end = (u8 *)eeprom + len;
 
 	wrap = (struct eeprom_pda_wrap *) eeprom;
-	entry = (void *)wrap->data + wrap->len;
-	i += 2;
-	i += le16_to_cpu(entry->len)*2;
-	while (i < len) {
+	entry = (void *)wrap->data + le16_to_cpu(wrap->len);
+
+	/* verify that at least the entry length/code fits */
+	while ((u8 *)entry <= end - sizeof(*entry)) {
 		entry_len = le16_to_cpu(entry->len);
 		data_len = ((entry_len - 1) << 1);
+
+		/* abort if entry exceeds whole structure */
+		if ((u8 *)entry + sizeof(*entry) + data_len > end)
+			break;
+
 		switch (le16_to_cpu(entry->code)) {
 		case PDR_MAC_ADDRESS:
 			SET_IEEE80211_PERM_ADDR(dev, entry->data);
@@ -289,7 +294,8 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 			priv->version = *(u8 *)(entry->data + 1);
 			break;
 		case PDR_END:
-			i = len;
+			/* make it overrun */
+			entry_len = len;
 			break;
 		default:
 			printk(KERN_INFO "p54: unknown eeprom code : 0x%x\n",
@@ -298,8 +304,6 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 		}
 
 		entry = (void *)entry + (entry_len + 1)*2;
-		i += 2;
-		i += entry_len*2;
 	}
 
 	if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) {

drivers/net/wireless/p54common.h

@@ -53,10 +53,10 @@ struct pda_entry {
 } __attribute__ ((packed));
 
 struct eeprom_pda_wrap {
-	u32 magic;
-	u16 pad;
-	u16 len;
-	u32 arm_opcode;
+	__le32 magic;
+	__le16 pad;
+	__le16 len;
+	__le32 arm_opcode;
 	u8 data[0];
 } __attribute__ ((packed));
 

drivers/net/wireless/rndis_wlan.c

@@ -260,7 +260,7 @@ struct NDIS_802_11_KEY {
 	__le32 KeyLength;
 	u8 Bssid[6];
 	u8 Padding[6];
-	__le64 KeyRSC;
+	u8 KeyRSC[8];
 	u8 KeyMaterial[32];
 } __attribute__((packed));
 
@@ -1508,7 +1508,7 @@ static int rndis_iw_set_encode_ext(struct net_device *dev,
 	struct usbnet *usbdev = dev->priv;
 	struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
 	struct NDIS_802_11_KEY ndis_key;
-	int i, keyidx, ret;
+	int keyidx, ret;
 	u8 *addr;
 
 	keyidx = wrqu->encoding.flags & IW_ENCODE_INDEX;
@@ -1543,9 +1543,7 @@ static int rndis_iw_set_encode_ext(struct net_device *dev,
 	ndis_key.KeyIndex = cpu_to_le32(keyidx);
 
 	if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
-		for (i = 0; i < 6; i++)
-			ndis_key.KeyRSC |=
-				cpu_to_le64(ext->rx_seq[i] << (i * 8));
+		memcpy(ndis_key.KeyRSC, ext->rx_seq, 6);
 		ndis_key.KeyIndex |= cpu_to_le32(1 << 29);
 	}