---

yaml
---
r: 265216
b: refs/heads/master
c: 86387e1
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 93f7848b77bcf1108879defd32612422ae80d785
+refs/heads/master: 86387e1ac4fcaa45ff5578013a78593d1a0ba279

trunk/MAINTAINERS

@@ -4380,9 +4380,8 @@ W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
 S:	Supported
 F:	Documentation/networking/s2io.txt
-F:	drivers/net/s2io*
 F:	Documentation/networking/vxge.txt
-F:	drivers/net/vxge/
+F:	drivers/net/ethernet/neterion/
 
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell

trunk/drivers/net/Kconfig

@@ -1485,40 +1485,6 @@ config ENIC
 	help
 	  This enables the support for the Cisco VIC Ethernet card.
 
-config S2IO
-	tristate "Exar Xframe 10Gb Ethernet Adapter"
-	depends on PCI
-	---help---
-	  This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
-
-	  More specific information on configuring the driver is in 
-	  <file:Documentation/networking/s2io.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called s2io.
-
-config VXGE
-	tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
-	depends on PCI && INET
-	---help---
-	  This driver supports Exar Corp's X3100 Series 10 GbE PCIe
-	  I/O Virtualized Server Adapter.
-
-	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/vxge.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called vxge.
-
-config VXGE_DEBUG_TRACE_ALL
-	bool "Enabling All Debug trace statments in driver"
-	default n
-	depends on VXGE
-	---help---
-	  Say Y here if you want to enabling all the debug trace statements in
-	  the vxge driver. By default only few debug trace statements are
-	  enabled.
-
 config PASEMI_MAC
 	tristate "PA Semi 1/10Gbit MAC"
 	depends on PPC_PASEMI && PCI && INET

trunk/drivers/net/Makefile

@@ -149,8 +149,6 @@ obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_R8169) += r8169.o
 obj-$(CONFIG_IBMVETH) += ibmveth.o
-obj-$(CONFIG_S2IO) += s2io.o
-obj-$(CONFIG_VXGE) += vxge/
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o

trunk/drivers/net/ethernet/Kconfig

@@ -18,6 +18,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/emulex/Kconfig"
+source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"

trunk/drivers/net/ethernet/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
+obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/

trunk/drivers/net/ethernet/neterion/Kconfig

@@ -0,0 +1,54 @@
+#
+# Exar device configuration
+#
+
+config NET_VENDOR_EXAR
+	bool "Exar devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say
+	  Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Exar cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_EXAR
+
+config S2IO
+	tristate "Exar Xframe 10Gb Ethernet Adapter"
+	depends on PCI
+	---help---
+	  This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/s2io.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called s2io.
+
+config VXGE
+	tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
+	depends on PCI && INET
+	---help---
+	  This driver supports Exar Corp's X3100 Series 10 GbE PCIe
+	  I/O Virtualized Server Adapter.
+
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/vxge.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called vxge.
+
+config VXGE_DEBUG_TRACE_ALL
+	bool "Enabling All Debug trace statements in driver"
+	default n
+	depends on VXGE
+	---help---
+	  Say Y here if you want to enabling all the debug trace statements in
+	  the vxge driver. By default only few debug trace statements are
+	  enabled.
+
+endif # NET_VENDOR_EXAR

trunk/drivers/net/ethernet/neterion/Makefile

@@ -0,0 +1,6 @@
+#
+# Makefile for the Exar network device drivers.
+#
+
+obj-$(CONFIG_S2IO) += s2io.o
+obj-$(CONFIG_VXGE) += vxge/