---

yaml
---
r: 275924
b: refs/heads/master
c: de7badf
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0f751e641a71157aa584c2a2e22fda52b52b8a56
+refs/heads/master: de7badf1adc7cc95269ac4b435da23c169018a3e

trunk/Documentation/DocBook/uio-howto.tmpl

@@ -520,6 +520,11 @@ Here's a description of the fields of <varname>struct uio_mem</varname>:
 </para>
 
 <itemizedlist>
+<listitem><para>
+<varname>const char *name</varname>: Optional. Set this to help identify
+the memory region, it will show up in the corresponding sysfs node.
+</para></listitem>
+
 <listitem><para>
 <varname>int memtype</varname>: Required if the mapping is used. Set this to
 <varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
@@ -553,7 +558,7 @@ instead to remember such an address.
 </itemizedlist>
 
 <para>
-Please do not touch the <varname>kobj</varname> element of
+Please do not touch the <varname>map</varname> element of
 <varname>struct uio_mem</varname>! It is used by the UIO framework
 to set up sysfs files for this mapping. Simply leave it alone.
 </para>

trunk/Documentation/i2c/ten-bit-addresses

@@ -1,22 +1,24 @@
 The I2C protocol knows about two kinds of device addresses: normal 7 bit
 addresses, and an extended set of 10 bit addresses. The sets of addresses
 do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
-address 0x10 (though a single device could respond to both of them). You
-select a 10 bit address by adding an extra byte after the address
-byte:
-  S Addr7 Rd/Wr ....
-becomes
-  S 11110 Addr10 Rd/Wr
-S is the start bit, Rd/Wr the read/write bit, and if you count the number
-of bits, you will see the there are 8 after the S bit for 7 bit addresses,
-and 16 after the S bit for 10 bit addresses.
+address 0x10 (though a single device could respond to both of them).
 
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
-several places in the code that will cause SEVERE PROBLEMS with 10 bit
-addresses, even though there is some basic handling and hooks. Also,
-almost no supported adapter handles the 10 bit addresses correctly.
+I2C messages to and from 10-bit address devices have a different format.
+See the I2C specification for the details.
 
-As soon as a real 10 bit address device is spotted 'in the wild', we
-can and will add proper support. Right now, 10 bit address devices
-are defined by the I2C protocol, but we have never seen a single device
-which supports them.
+The current 10 bit address support is minimal. It should work, however
+you can expect some problems along the way:
+* Not all bus drivers support 10-bit addresses. Some don't because the
+  hardware doesn't support them (SMBus doesn't require 10-bit address
+  support for example), some don't because nobody bothered adding the
+  code (or it's there but not working properly.) Software implementation
+  (i2c-algo-bit) is known to work.
+* Some optional features do not support 10-bit addresses. This is the
+  case of automatic detection and instantiation of devices by their,
+  drivers, for example.
+* Many user-space packages (for example i2c-tools) lack support for
+  10-bit addresses.
+
+Note that 10-bit address devices are still pretty rare, so the limitations
+listed above could stay for a long time, maybe even forever if nobody
+needs them to be fixed.

trunk/Documentation/serial/serial-rs485.txt

@@ -97,15 +97,23 @@
 
 	struct serial_rs485 rs485conf;
 
-	/* Set RS485 mode: */
+	/* Enable RS485 mode: */
 	rs485conf.flags |= SER_RS485_ENABLED;
 
+	/* Set logical level for RTS pin equal to 1 when sending: */
+	rs485conf.flags |= SER_RS485_RTS_ON_SEND;
+	/* or, set logical level for RTS pin equal to 0 when sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+	/* Set logical level for RTS pin equal to 1 after sending: */
+	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+	/* or, set logical level for RTS pin equal to 0 after sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
 	/* Set rts delay before send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
 	rs485conf.delay_rts_before_send = ...;
 
 	/* Set rts delay after send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
 	rs485conf.delay_rts_after_send = ...;
 
 	/* Set this flag if you want to receive data even whilst sending data */

trunk/MAINTAINERS

@@ -1789,6 +1789,14 @@ F:	include/net/cfg80211.h
 F:	net/wireless/*
 X:	net/wireless/wext*
 
+CHAR and MISC DRIVERS
+M:	Arnd Bergmann <arnd@arndb.de>
+M:	Greg Kroah-Hartman <greg@kroah.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
+S:	Maintained
+F:	drivers/char/*
+F:	drivers/misc/*
+
 CHECKPATCH
 M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
@@ -3720,7 +3728,7 @@ F:	fs/jbd2/
 F:	include/linux/jbd2.h
 
 JSM Neo PCI based serial card
-M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+M:	Lucas Tavares <lucaskt@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/jsm/

trunk/arch/x86/um/asm/processor.h

@@ -11,7 +11,7 @@
 #endif
 
 #define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_SP)
 #define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP)
 
 #define ARCH_IS_STACKGROW(address) \

trunk/drivers/base/node.c

@@ -127,12 +127,13 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 		       nid, K(node_page_state(nid, NR_WRITEBACK)),
 		       nid, K(node_page_state(nid, NR_FILE_PAGES)),
 		       nid, K(node_page_state(nid, NR_FILE_MAPPED)),
-		       nid, K(node_page_state(nid, NR_ANON_PAGES)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		       nid, K(node_page_state(nid, NR_ANON_PAGES)
 			+ node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
-			HPAGE_PMD_NR
+			HPAGE_PMD_NR),
+#else
+		       nid, K(node_page_state(nid, NR_ANON_PAGES)),
 #endif
-		       ),
 		       nid, K(node_page_state(nid, NR_SHMEM)),
 		       nid, node_page_state(nid, NR_KERNEL_STACK) *
 				THREAD_SIZE / 1024,
@@ -143,13 +144,14 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) +
 				node_page_state(nid, NR_SLAB_UNRECLAIMABLE)),
 		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)),
-		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
 			, nid,
 			K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
-			HPAGE_PMD_NR)
+			HPAGE_PMD_NR));
+#else
+		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)));
 #endif
-		       );
 	n += hugetlb_report_node_meminfo(nid, buf + n);
 	return n;
 }

trunk/drivers/gpu/drm/drm_crtc.c

@@ -1873,6 +1873,10 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
 	}
 
 	if (num_clips && clips_ptr) {
+		if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) {
+			ret = -EINVAL;
+			goto out_err1;
+		}
 		clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL);
 		if (!clips) {
 			ret = -ENOMEM;

trunk/drivers/gpu/drm/i915/i915_debugfs.c

@@ -636,11 +636,16 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data)
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *ring;
+	int ret;
 
 	ring = &dev_priv->ring[(uintptr_t)node->info_ent->data];
 	if (ring->size == 0)
 		return 0;
 
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	seq_printf(m, "Ring %s:\n", ring->name);
 	seq_printf(m, "  Head :    %08x\n", I915_READ_HEAD(ring) & HEAD_ADDR);
 	seq_printf(m, "  Tail :    %08x\n", I915_READ_TAIL(ring) & TAIL_ADDR);
@@ -654,6 +659,8 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data)
 	seq_printf(m, "  Control : %08x\n", I915_READ_CTL(ring));
 	seq_printf(m, "  Start :   %08x\n", I915_READ_START(ring));
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -842,7 +849,16 @@ static int i915_rstdby_delays(struct seq_file *m, void *unused)
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	u16 crstanddelay = I915_READ16(CRSTANDVID);
+	u16 crstanddelay;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	crstanddelay = I915_READ16(CRSTANDVID);
+
+	mutex_unlock(&dev->struct_mutex);
 
 	seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f));
 
@@ -940,14 +956,20 @@ static int i915_delayfreq_table(struct seq_file *m, void *unused)
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 delayfreq;
-	int i;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < 16; i++) {
 		delayfreq = I915_READ(PXVFREQ_BASE + i * 4);
 		seq_printf(m, "P%02dVIDFREQ: 0x%08x (VID: %d)\n", i, delayfreq,
 			   (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT);
 	}
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -962,13 +984,19 @@ static int i915_inttoext_table(struct seq_file *m, void *unused)
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 inttoext;
-	int i;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	for (i = 1; i <= 32; i++) {
 		inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4);
 		seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext);
 	}
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -977,9 +1005,19 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	u32 rgvmodectl = I915_READ(MEMMODECTL);
-	u32 rstdbyctl = I915_READ(RSTDBYCTL);
-	u16 crstandvid = I915_READ16(CRSTANDVID);
+	u32 rgvmodectl, rstdbyctl;
+	u16 crstandvid;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	rgvmodectl = I915_READ(MEMMODECTL);
+	rstdbyctl = I915_READ(RSTDBYCTL);
+	crstandvid = I915_READ16(CRSTANDVID);
+
+	mutex_unlock(&dev->struct_mutex);
 
 	seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
 		   "yes" : "no");
@@ -1167,9 +1205,16 @@ static int i915_gfxec(struct seq_file *m, void *unused)
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4));
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 

trunk/drivers/gpu/drm/i915/i915_drv.c

@@ -68,7 +68,7 @@ module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
 MODULE_PARM_DESC(i915_enable_rc6,
 		"Enable power-saving render C-state 6 (default: true)");
 
-unsigned int i915_enable_fbc __read_mostly = -1;
+int i915_enable_fbc __read_mostly = -1;
 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
 MODULE_PARM_DESC(i915_enable_fbc,
 		"Enable frame buffer compression for power savings "
@@ -80,7 +80,7 @@ MODULE_PARM_DESC(lvds_downclock,
 		"Use panel (LVDS/eDP) downclocking for power savings "
 		"(default: false)");
 
-unsigned int i915_panel_use_ssc __read_mostly = -1;
+int i915_panel_use_ssc __read_mostly = -1;
 module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
 MODULE_PARM_DESC(lvds_use_ssc,
 		"Use Spread Spectrum Clock with panels [LVDS/eDP] "
@@ -107,7 +107,7 @@ static struct drm_driver driver;
 extern int intel_agp_enabled;
 
 #define INTEL_VGA_DEVICE(id, info) {		\
-	.class = PCI_CLASS_DISPLAY_VGA << 8,	\
+	.class = PCI_BASE_CLASS_DISPLAY << 16,	\
 	.class_mask = 0xff0000,			\
 	.vendor = 0x8086,			\
 	.device = id,				\