---

yaml
---
r: 233495
b: refs/heads/master
c: 97b9c3e
h: refs/heads/master
i:
  233493: de10115
  233491: ff23232
  233487: a887e85
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5a5af730536fbf15fc354980cba2a0400afa6b76
+refs/heads/master: 97b9c3e145a1ddb5a9d8115c82a8981b3f13cba2

trunk/Documentation/hwmon/jc42

@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm

trunk/Documentation/hwmon/k10temp

@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver

trunk/MAINTAINERS

@@ -885,7 +885,7 @@ S:	Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@codeaurora.org>
+M:	Daniel Walker <dwalker@fifo99.com>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -2873,7 +2873,6 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/

trunk/arch/s390/boot/compressed/misc.c

@@ -133,11 +133,12 @@ unsigned long decompress_kernel(void)
 	unsigned long output_addr;
 	unsigned char *output;
 
-	check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+	output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
+	check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
 	memset(&_bss, 0, &_ebss - &_bss);
 	free_mem_ptr = (unsigned long)&_end;
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-	output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+	output = (unsigned char *) output_addr;
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*

trunk/arch/s390/include/asm/atomic.h

@@ -36,14 +36,19 @@
 
 static inline int atomic_read(const atomic_t *v)
 {
-	barrier();
-	return v->counter;
+	int c;
+
+	asm volatile(
+		"	l	%0,%1\n"
+		: "=d" (c) : "Q" (v->counter));
+	return c;
 }
 
 static inline void atomic_set(atomic_t *v, int i)
 {
-	v->counter = i;
-	barrier();
+	asm volatile(
+		"	st	%1,%0\n"
+		: "=Q" (v->counter) : "d" (i));
 }
 
 static inline int atomic_add_return(int i, atomic_t *v)
@@ -128,14 +133,19 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 static inline long long atomic64_read(const atomic64_t *v)
 {
-	barrier();
-	return v->counter;
+	long long c;
+
+	asm volatile(
+		"	lg	%0,%1\n"
+		: "=d" (c) : "Q" (v->counter));
+	return c;
 }
 
 static inline void atomic64_set(atomic64_t *v, long long i)
 {
-	v->counter = i;
-	barrier();
+	asm volatile(
+		"	stg	%1,%0\n"
+		: "=Q" (v->counter) : "d" (i));
 }
 
 static inline long long atomic64_add_return(long long i, atomic64_t *v)

trunk/arch/s390/include/asm/cache.h

@@ -13,6 +13,7 @@
 
 #define L1_CACHE_BYTES     256
 #define L1_CACHE_SHIFT     8
+#define NET_SKB_PAD	   32
 
 #define __read_mostly __attribute__((__section__(".data..read_mostly")))
 

trunk/drivers/char/tpm/tpm.c

@@ -577,11 +577,9 @@ void tpm_get_timeouts(struct tpm_chip *chip)
 	if (rc)
 		return;
 
-	if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
-	    be32_to_cpu(tpm_cmd.header.out.length)
-	    != sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
+	if (be32_to_cpu(tpm_cmd.header.out.return_code)
+	    != 3 * sizeof(u32))
 		return;
-
 	duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
 	chip->vendor.duration[TPM_SHORT] =
 	    usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
@@ -941,18 +939,6 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
 
-ssize_t tpm_show_timeouts(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	struct tpm_chip *chip = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%d %d %d\n",
-	               jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
-	               jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
-	               jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
-}
-EXPORT_SYMBOL_GPL(tpm_show_timeouts);
-
 ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {

trunk/drivers/char/tpm/tpm.h

@@ -56,8 +56,6 @@ extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr,
 				char *);
 extern ssize_t tpm_show_temp_deactivated(struct device *,
 					 struct device_attribute *attr, char *);
-extern ssize_t tpm_show_timeouts(struct device *,
-				 struct device_attribute *attr, char *);
 
 struct tpm_chip;
 

trunk/drivers/char/tpm/tpm_tis.c

@@ -376,7 +376,6 @@ static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
 		   NULL);
 static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
 static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
-static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
 
 static struct attribute *tis_attrs[] = {
 	&dev_attr_pubek.attr,
@@ -386,8 +385,7 @@ static struct attribute *tis_attrs[] = {
 	&dev_attr_owned.attr,
 	&dev_attr_temp_deactivated.attr,
 	&dev_attr_caps.attr,
-	&dev_attr_cancel.attr,
-	&dev_attr_timeouts.attr, NULL,
+	&dev_attr_cancel.attr, NULL,
 };
 
 static struct attribute_group tis_attr_grp = {

trunk/drivers/hwmon/Kconfig

@@ -238,13 +238,13 @@ config SENSORS_K8TEMP
 	  will be called k8temp.
 
 config SENSORS_K10TEMP
-	tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+	tristate "AMD Family 10h/11h/12h/14h temperature sensor"
 	depends on X86 && PCI
 	help
 	  If you say yes here you get support for the temperature
 	  sensor(s) inside your CPU. Supported are later revisions of
-	  the AMD Family 10h and all revisions of the AMD Family 11h
-	  microarchitectures.
+	  the AMD Family 10h and all revisions of the AMD Family 11h,
+	  12h (Llano), and 14h (Brazos) microarchitectures.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called k10temp.
@@ -455,13 +455,14 @@ config SENSORS_JZ4740
 	  called jz4740-hwmon.
 
 config SENSORS_JC42
-	tristate "JEDEC JC42.4 compliant temperature sensors"
+	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 	depends on I2C
 	help
-	  If you say yes here you get support for Jedec JC42.4 compliant
-	  temperature sensors. Support will include, but not be limited to,
-	  ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
-	  MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+	  If you say yes here, you get support for JEDEC JC42.4 compliant
+	  temperature sensors, which are used on many DDR3 memory modules for
+	  mobile devices and servers.  Support will include, but not be limited
+	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
@@ -574,7 +575,7 @@ config SENSORS_LM85
 	help
 	  If you say yes here you get support for National Semiconductor LM85
 	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
-	  EMC6D101 and EMC6D102.
+	  EMC6D101, EMC6D102, and EMC6D103.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm85.

trunk/drivers/hwmon/jc42.c

@@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = {
 
 /* Configuration register defines */
 #define JC42_CFG_CRIT_ONLY	(1 << 2)
+#define JC42_CFG_TCRIT_LOCK	(1 << 6)
+#define JC42_CFG_EVENT_LOCK	(1 << 7)
 #define JC42_CFG_SHUTDOWN	(1 << 8)
 #define JC42_CFG_HYST_SHIFT	9
 #define JC42_CFG_HYST_MASK	0x03
@@ -332,7 +334,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct jc42_data *data = i2c_get_clientdata(client);
-	long val;
+	unsigned long val;
 	int diff, hyst;
 	int err;
 	int ret = count;
@@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev,
 
 static DEVICE_ATTR(temp1_input, S_IRUGO,
 		   show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
 		   show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
 		   show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
 		   show_temp_max, set_temp_max);
 
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
 		   show_temp_crit_hyst, set_temp_crit_hyst);
 static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
 		   show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = {
 	NULL
 };
 
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+				  struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct jc42_data *data = i2c_get_clientdata(client);
+	unsigned int config = data->config;
+	bool readonly;
+
+	if (attr == &dev_attr_temp1_crit.attr)
+		readonly = config & JC42_CFG_TCRIT_LOCK;
+	else if (attr == &dev_attr_temp1_min.attr ||
+		 attr == &dev_attr_temp1_max.attr)
+		readonly = config & JC42_CFG_EVENT_LOCK;
+	else if (attr == &dev_attr_temp1_crit_hyst.attr)
+		readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+	else
+		readonly = true;
+
+	return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
 static const struct attribute_group jc42_group = {
 	.attrs = jc42_attributes,
+	.is_visible = jc42_attribute_mode,
 };
 
 /* Return 0 if detection is successful, -ENODEV otherwise */

trunk/drivers/hwmon/k10temp.c

@@ -1,5 +1,5 @@
 /*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
  *
  * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
  *
@@ -25,7 +25,7 @@
 #include <linux/pci.h>
 #include <asm/processor.h>
 
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_LICENSE("GPL");
 
@@ -208,6 +208,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev)
 static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, k10temp_id_table);