i2c-pnx.c: Remove duplicated i2c.h

The platforms using i2c-pnx.c both defined a duplicated i2c.h (used nowhere
else). This patch removes those and integrates the contents into the driver
itself.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>

drivers/i2c/busses/i2c-pnx.c

@@ -24,13 +24,56 @@
 #include <linux/clk.h>
 #include <linux/slab.h>
 
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-
 #define I2C_PNX_TIMEOUT		10 /* msec */
 #define I2C_PNX_SPEED_KHZ	100
 #define I2C_PNX_REGION_SIZE	0x100
 
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
 static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
 {
 	while (timeout > 0 &&