staging: comedi: addi_apci_1516: merge in addi_apci_2016 driver

The low-level hardware support code for these drivers, hwdrv_apci1516.c
and hwdrv_apci2016.c, is identical. Both of these boards are 16 channel
dio boards. The 1516 board has 8 input/8 output channels and the 2016
has 16 output channels.

To ease maintainability, merge the boardinfo and pci device information
from the addi_apci_2016 driver into the addi_apci_1516 driver and modify
the Kconfig and Makefile appropriately.

This allows deleting the addi_apci_2016.c and hwdrv_apci2016.c files.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/Kconfig

@@ -594,10 +594,10 @@ config COMEDI_ADDI_APCI_1500
 	  called addi_apci_1500.
 
 config COMEDI_ADDI_APCI_1516
-	tristate "ADDI-DATA APCI_1516 support"
+	tristate "ADDI-DATA APCI-1516/2016 support"
 	depends on VIRT_TO_BUS
 	---help---
-	  Enable support for ADDI-DATA APCI_1516 cards
+	  Enable support for ADDI-DATA APCI-1516 and APCI-2016 boards.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called addi_apci_1516.
@@ -620,15 +620,6 @@ config COMEDI_ADDI_APCI_16XX
 	  To compile this driver as a module, choose M here: the module will be
 	  called addi_apci_16xx.
 
-config COMEDI_ADDI_APCI_2016
-	tristate "ADDI-DATA APCI_2016 support"
-	depends on VIRT_TO_BUS
-	---help---
-	  Enable support for ADDI-DATA APCI_2016 cards
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called addi_apci_2016.
-
 config COMEDI_ADDI_APCI_2032
 	tristate "ADDI-DATA APCI_2032 support"
 	depends on VIRT_TO_BUS

drivers/staging/comedi/drivers/Makefile

@@ -62,7 +62,6 @@ obj-$(CONFIG_COMEDI_ADDI_APCI_1500)	+= addi_apci_1500.o
 obj-$(CONFIG_COMEDI_ADDI_APCI_1516)	+= addi_apci_1516.o
 obj-$(CONFIG_COMEDI_ADDI_APCI_1564)	+= addi_apci_1564.o
 obj-$(CONFIG_COMEDI_ADDI_APCI_16XX)	+= addi_apci_16xx.o
-obj-$(CONFIG_COMEDI_ADDI_APCI_2016)	+= addi_apci_2016.o
 obj-$(CONFIG_COMEDI_ADDI_APCI_2032)	+= addi_apci_2032.o
 obj-$(CONFIG_COMEDI_ADDI_APCI_2200)	+= addi_apci_2200.o
 obj-$(CONFIG_COMEDI_ADDI_APCI_3120)	+= addi_apci_3120.o

drivers/staging/comedi/drivers/addi_apci_1516.c

@@ -27,6 +27,22 @@ static const struct addi_board apci1516_boardtypes[] = {
 		.timer_config		= i_APCI1516_ConfigWatchdog,
 		.timer_write		= i_APCI1516_StartStopWriteWatchdog,
 		.timer_read		= i_APCI1516_ReadWatchdog,
+	}, {
+		.pc_DriverName		= "apci2016",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1002,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI1516_ADDRESS_RANGE,
+		.i_IorangeBase2		= 32,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrDoChannel		= 16,
+		.i_Timer		= 1,
+		.reset			= i_APCI1516_Reset,
+		.do_bits		= apci1516_do_insn_bits,
+		.timer_config		= i_APCI1516_ConfigWatchdog,
+		.timer_write		= i_APCI1516_StartStopWriteWatchdog,
+		.timer_read		= i_APCI1516_ReadWatchdog,
 	},
 };
 
@@ -53,6 +69,7 @@ static void __devexit apci1516_pci_remove(struct pci_dev *dev)
 
 static DEFINE_PCI_DEVICE_TABLE(apci1516_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1001) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1002) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, apci1516_pci_table);