---

yaml
---
r: 4896
b: refs/heads/master
c: f60f700
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6d283d271674b1127881ebf082266a2c3fe6e0e4
+refs/heads/master: f60f700876cd51de9de69f3a3c865d95e287a24d

trunk/Documentation/dontdiff

@@ -41,6 +41,7 @@ COPYING
 CREDITS
 CVS
 ChangeSet
+Image
 Kerntypes
 MODS.txt
 Module.symvers
@@ -103,6 +104,7 @@ logo_*.c
 logo_*_clut224.c
 logo_*_mono.c
 lxdialog
+mach-types.h
 make_times_h
 map
 maui_boot.h

trunk/Documentation/filesystems/ntfs.txt

@@ -21,7 +21,7 @@ Overview
 ========
 
 Linux-NTFS comes with a number of user-space programs known as ntfsprogs.
-These include mkntfs, a full-featured ntfs file system format utility,
+These include mkntfs, a full-featured ntfs filesystem format utility,
 ntfsundelete used for recovering files that were unintentionally deleted
 from an NTFS volume and ntfsresize which is used to resize an NTFS partition.
 See the web site for more information.
@@ -149,7 +149,14 @@ case_sensitive=<BOOL>	If case_sensitive is specified, treat all file names as
 			name, if it exists.  If case_sensitive, you will need
 			to provide the correct case of the short file name.
 
-errors=opt		What to do when critical file system errors are found.
+disable_sparse=<BOOL>	If disable_sparse is specified, creation of sparse
+			regions, i.e. holes, inside files is disabled for the
+			volume (for the duration of this mount only).  By
+			default, creation of sparse regions is enabled, which
+			is consistent with the behaviour of traditional Unix
+			filesystems.
+
+errors=opt		What to do when critical filesystem errors are found.
 			Following values can be used for "opt":
 			  continue: DEFAULT, try to clean-up as much as
 				    possible, e.g. marking a corrupt inode as
@@ -432,6 +439,24 @@ ChangeLog
 
 Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 
+2.1.23:
+	- Stamp the user space journal, aka transaction log, aka $UsnJrnl, if
+	  it is present and active thus telling Windows and applications using
+	  the transaction log that changes can have happened on the volume
+	  which are not recorded in $UsnJrnl.
+	- Detect the case when Windows has been hibernated (suspended to disk)
+	  and if this is the case do not allow (re)mounting read-write to
+	  prevent data corruption when you boot back into the suspended
+	  Windows session.
+	- Implement extension of resident files using the normal file write
+	  code paths, i.e. most very small files can be extended to be a little
+	  bit bigger but not by much.
+	- Add new mount option "disable_sparse".  (See list of mount options
+	  above for details.)
+	- Improve handling of ntfs volumes with errors and strange boot sectors
+	  in particular.
+	- Fix various bugs including a nasty deadlock that appeared in recent
+	  kernels (around 2.6.11-2.6.12 timeframe).
 2.1.22:
 	- Improve handling of ntfs volumes with errors.
 	- Fix various bugs and race conditions.

trunk/arch/arm/configs/shark_defconfig

@@ -1,22 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:59:14 2005
+# Linux kernel version: 2.6.12-git3
+# Sat Jul 16 15:21:47 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -33,7 +32,10 @@ CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -81,6 +83,7 @@ CONFIG_ARCH_SHARK=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # Processor Type
@@ -103,10 +106,12 @@ CONFIG_CPU_TLB_V4WB=y
 #
 CONFIG_ISA=y
 CONFIG_ISA_DMA=y
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_HOST_VIA82C505=y
 CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -116,7 +121,9 @@ CONFIG_PCI_LEGACY_PROC=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_DISCONTIGMEM is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
@@ -163,6 +170,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -172,8 +180,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Parallel port support
 #
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
@@ -189,7 +197,6 @@ CONFIG_PARPORT_PC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
@@ -229,7 +236,7 @@ CONFIG_BLK_DEV_IDE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD=m
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -261,6 +268,7 @@ CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -290,17 +298,14 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -314,11 +319,8 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=m
@@ -327,6 +329,7 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -344,6 +347,8 @@ CONFIG_SCSI_QLA2XXX=m
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -365,7 +370,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -380,7 +384,7 @@ CONFIG_INET=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
+CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
@@ -439,6 +443,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
 #
@@ -483,9 +488,11 @@ CONFIG_CS89x0=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -569,7 +576,6 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -592,6 +598,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -653,6 +660,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -674,7 +682,7 @@ CONFIG_FB_CYBER2000=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -808,17 +816,17 @@ CONFIG_DNOTIFY=y
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -833,7 +841,6 @@ CONFIG_DEVFS_MOUNT=y
 # CONFIG_DEVFS_DEBUG is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
@@ -857,13 +864,14 @@ CONFIG_RAMFS=y
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -895,12 +903,12 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Native Language Support
 #
-CONFIG_NLS=y
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_850=m
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -921,7 +929,7 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -945,11 +953,22 @@ CONFIG_NLS_ISO8859_1=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options