---

yaml
---
r: 119450
b: refs/heads/master
c: af38d90
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a730b327ca70f0e4d933202e3979e96613c3585f
+refs/heads/master: af38d90d6a5e135b546a3f86222ba2ad895ba4ae

trunk/arch/arm/plat-omap/gpio.c

@@ -101,6 +101,7 @@
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c
 #define OMAP24XX_GPIO_IRQENABLE1	0x001c
+#define OMAP24XX_GPIO_WAKE_EN		0x0020
 #define OMAP24XX_GPIO_CTRL		0x0030
 #define OMAP24XX_GPIO_OE		0x0034
 #define OMAP24XX_GPIO_DATAIN		0x0038
@@ -1551,7 +1552,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
-			wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
@@ -1574,7 +1575,7 @@ static int omap_gpio_resume(struct sys_device *dev)
 {
 	int i;
 
-	if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
 		return 0;
 
 	for (i = 0; i < gpio_bank_count; i++) {

trunk/arch/arm/plat-omap/include/mach/pm.h

@@ -128,7 +128,7 @@ void clk_deny_idle(struct clk *clk);
  * clk_allow_idle - Counters previous clk_deny_idle
  * @clk: clock signal handle
  */
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
 
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);

trunk/drivers/usb/gadget/pxa25x_udc.c

@@ -141,7 +141,11 @@ static int is_vbus_present(void)
 
 	if (mach->gpio_vbus) {
 		int value = gpio_get_value(mach->gpio_vbus);
-		return mach->gpio_vbus_inverted ? !value : value;
+
+		if (mach->gpio_vbus_inverted)
+			return !value;
+		else
+			return !!value;
 	}
 	if (mach->udc_is_connected)
 		return mach->udc_is_connected();
@@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 	struct pxa25x_udc	*udc;
 
 	udc = container_of(_gadget, struct pxa25x_udc, gadget);
-	udc->vbus = (is_active != 0);
+	udc->vbus = is_active;
 	DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
 	pullup(udc);
 	return 0;
@@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev)
 static irqreturn_t udc_vbus_irq(int irq, void *_dev)
 {
 	struct pxa25x_udc	*dev = _dev;
-	int			vbus = gpio_get_value(dev->mach->gpio_vbus);
 
-	if (dev->mach->gpio_vbus_inverted)
-		vbus = !vbus;
-
-	pxa25x_udc_vbus_session(&dev->gadget, vbus);
+	pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
 	return IRQ_HANDLED;
 }
 

trunk/drivers/video/omap/Makefile

@@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
 objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
 objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
 objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
 
 omapfb-objs := $(objs-yy)