---

yaml
---
r: 181115
b: refs/heads/master
c: bb29c67
h: refs/heads/master
i:
  181113: 4896a3a
  181111: e565ff3
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 046581f9623b53f551a93864bb74e15ad2514f0c
+refs/heads/master: bb29c677b366fdf4f6522cd82228a32567aa98c7

trunk/arch/sh/include/asm/tlb.h

@@ -98,49 +98,9 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
-#ifdef CONFIG_CPU_SH4
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SUPERH64)
 extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
 extern void tlb_unwire_entry(void);
-#elif defined(CONFIG_SUPERH64)
-static int dtlb_entry;
-static unsigned long long dtlb_entries[64];
-
-static inline void tlb_wire_entry(struct vm_area_struct *vma,
-				  unsigned long addr, pte_t pte)
-{
-	unsigned long long entry;
-	unsigned long paddr, flags;
-
-	BUG_ON(dtlb_entry == 64);
-
-	local_irq_save(flags);
-
-	entry = sh64_get_wired_dtlb_entry();
-	dtlb_entries[dtlb_entry++] = entry;
-
-	paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK;
-	paddr &= ~PAGE_MASK;
-
-	sh64_setup_tlb_slot(entry, addr, get_asid(), paddr);
-
-	local_irq_restore(flags);
-}
-
-static inline void tlb_unwire_entry(void)
-{
-	unsigned long long entry;
-	unsigned long flags;
-
-	BUG_ON(!dtlb_entry);
-
-	local_irq_save(flags);
-	entry = dtlb_entries[dtlb_entry--];
-
-	sh64_teardown_tlb_slot(entry);
-	sh64_put_wired_dtlb_entry(entry);
-
-	local_irq_restore(flags);
-}
 #else
 static inline void tlb_wire_entry(struct vm_area_struct *vma ,
 				  unsigned long addr, pte_t pte)
@@ -152,7 +112,7 @@ static inline void tlb_unwire_entry(void)
 {
 	BUG();
 }
-#endif /* CONFIG_CPU_SH4 */
+#endif
 
 #else /* CONFIG_MMU */
 

trunk/arch/sh/mm/Makefile

@@ -26,9 +26,9 @@ endif
 
 ifdef CONFIG_MMU
 tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
-tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
+tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o tlb-urb.o
 tlb-$(CONFIG_CPU_SH5)		:= tlb-sh5.o
-tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o tlb-urb.o
 obj-y				+= $(tlb-y)
 endif
 

trunk/arch/sh/mm/tlb-pteaex.c

@@ -76,69 +76,3 @@ void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
 	__raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
 	back_to_cached();
 }
-
-/*
- * Load the entry for 'addr' into the TLB and wire the entry.
- */
-void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
-	unsigned long status, flags;
-	int urb;
-
-	local_irq_save(flags);
-
-	/* Load the entry into the TLB */
-	__update_tlb(vma, addr, pte);
-
-	/* ... and wire it up. */
-	status = ctrl_inl(MMUCR);
-	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
-	status &= ~MMUCR_URB;
-
-	/*
-	 * Make sure we're not trying to wire the last TLB entry slot.
-	 */
-	BUG_ON(!--urb);
-
-	urb = urb % MMUCR_URB_NENTRIES;
-
-	status |= (urb << MMUCR_URB_SHIFT);
-	ctrl_outl(status, MMUCR);
-	ctrl_barrier();
-
-	local_irq_restore(flags);
-}
-
-/*
- * Unwire the last wired TLB entry.
- *
- * It should also be noted that it is not possible to wire and unwire
- * TLB entries in an arbitrary order. If you wire TLB entry N, followed
- * by entry N+1, you must unwire entry N+1 first, then entry N. In this
- * respect, it works like a stack or LIFO queue.
- */
-void tlb_unwire_entry(void)
-{
-	unsigned long status, flags;
-	int urb;
-
-	local_irq_save(flags);
-
-	status = ctrl_inl(MMUCR);
-	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
-	status &= ~MMUCR_URB;
-
-	/*
-	 * Make sure we're not trying to unwire a TLB entry when none
-	 * have been wired.
-	 */
-	BUG_ON(urb++ == MMUCR_URB_NENTRIES);
-
-	urb = urb % MMUCR_URB_NENTRIES;
-
-	status |= (urb << MMUCR_URB_SHIFT);
-	ctrl_outl(status, MMUCR);
-	ctrl_barrier();
-
-	local_irq_restore(flags);
-}

trunk/arch/sh/mm/tlb-sh4.c

@@ -81,69 +81,3 @@ void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
 	ctrl_outl(data, addr);
 	back_to_cached();
 }
-
-/*
- * Load the entry for 'addr' into the TLB and wire the entry.
- */
-void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
-	unsigned long status, flags;
-	int urb;
-
-	local_irq_save(flags);
-
-	/* Load the entry into the TLB */
-	__update_tlb(vma, addr, pte);
-
-	/* ... and wire it up. */
-	status = ctrl_inl(MMUCR);
-	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
-	status &= ~MMUCR_URB;
-
-	/*
-	 * Make sure we're not trying to wire the last TLB entry slot.
-	 */
-	BUG_ON(!--urb);
-
-	urb = urb % MMUCR_URB_NENTRIES;
-
-	status |= (urb << MMUCR_URB_SHIFT);
-	ctrl_outl(status, MMUCR);
-	ctrl_barrier();
-
-	local_irq_restore(flags);
-}
-
-/*
- * Unwire the last wired TLB entry.
- *
- * It should also be noted that it is not possible to wire and unwire
- * TLB entries in an arbitrary order. If you wire TLB entry N, followed
- * by entry N+1, you must unwire entry N+1 first, then entry N. In this
- * respect, it works like a stack or LIFO queue.
- */
-void tlb_unwire_entry(void)
-{
-	unsigned long status, flags;
-	int urb;
-
-	local_irq_save(flags);
-
-	status = ctrl_inl(MMUCR);
-	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
-	status &= ~MMUCR_URB;
-
-	/*
-	 * Make sure we're not trying to unwire a TLB entry when none
-	 * have been wired.
-	 */
-	BUG_ON(urb++ == MMUCR_URB_NENTRIES);
-
-	urb = urb % MMUCR_URB_NENTRIES;
-
-	status |= (urb << MMUCR_URB_SHIFT);
-	ctrl_outl(status, MMUCR);
-	ctrl_barrier();
-
-	local_irq_restore(flags);
-}

trunk/arch/sh/mm/tlb-sh5.c

@@ -143,3 +143,42 @@ void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
  */
 void sh64_teardown_tlb_slot(unsigned long long config_addr)
 	__attribute__ ((alias("__flush_tlb_slot")));
+
+static int dtlb_entry;
+static unsigned long long dtlb_entries[64];
+
+void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+	unsigned long long entry;
+	unsigned long paddr, flags;
+
+	BUG_ON(dtlb_entry == ARRAY_SIZE(dtlb_entries));
+
+	local_irq_save(flags);
+
+	entry = sh64_get_wired_dtlb_entry();
+	dtlb_entries[dtlb_entry++] = entry;
+
+	paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK;
+	paddr &= ~PAGE_MASK;
+
+	sh64_setup_tlb_slot(entry, addr, get_asid(), paddr);
+
+	local_irq_restore(flags);
+}
+
+void tlb_unwire_entry(void)
+{
+	unsigned long long entry;
+	unsigned long flags;
+
+	BUG_ON(!dtlb_entry);
+
+	local_irq_save(flags);
+	entry = dtlb_entries[dtlb_entry--];
+
+	sh64_teardown_tlb_slot(entry);
+	sh64_put_wired_dtlb_entry(entry);
+
+	local_irq_restore(flags);
+}

trunk/arch/sh/mm/tlb-urb.c

@@ -0,0 +1,81 @@
+/*
+ * arch/sh/mm/tlb-urb.c
+ *
+ * TLB entry wiring helpers for URB-equipped parts.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+
+/*
+ * Load the entry for 'addr' into the TLB and wire the entry.
+ */
+void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+	unsigned long status, flags;
+	int urb;
+
+	local_irq_save(flags);
+
+	/* Load the entry into the TLB */
+	__update_tlb(vma, addr, pte);
+
+	/* ... and wire it up. */
+	status = __raw_readl(MMUCR);
+	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
+	status &= ~MMUCR_URB;
+
+	/*
+	 * Make sure we're not trying to wire the last TLB entry slot.
+	 */
+	BUG_ON(!--urb);
+
+	urb = urb % MMUCR_URB_NENTRIES;
+
+	status |= (urb << MMUCR_URB_SHIFT);
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Unwire the last wired TLB entry.
+ *
+ * It should also be noted that it is not possible to wire and unwire
+ * TLB entries in an arbitrary order. If you wire TLB entry N, followed
+ * by entry N+1, you must unwire entry N+1 first, then entry N. In this
+ * respect, it works like a stack or LIFO queue.
+ */
+void tlb_unwire_entry(void)
+{
+	unsigned long status, flags;
+	int urb;
+
+	local_irq_save(flags);
+
+	status = __raw_readl(MMUCR);
+	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
+	status &= ~MMUCR_URB;
+
+	/*
+	 * Make sure we're not trying to unwire a TLB entry when none
+	 * have been wired.
+	 */
+	BUG_ON(urb++ == MMUCR_URB_NENTRIES);
+
+	urb = urb % MMUCR_URB_NENTRIES;
+
+	status |= (urb << MMUCR_URB_SHIFT);
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	local_irq_restore(flags);
+}