Merge branch 'amd-xgbe-next'

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2014-11-04

The following series of patches includes functional updates to the
driver as well as some trivial changes for function renaming and
spelling fixes.

- Move channel and ring structure allocation into the device open path
- Rename the pre_xmit function to dev_xmit
- Explicitly use the u32 data type for the device descriptors
- Use page allocation for the receive buffers
- Add support for split header/payload receive
- Add support for per DMA channel interrupts
- Add support for receive side scaling (RSS)
- Add support for ethtool receive side scaling commands
- Fix the spelling of descriptors
- After a PCS reset, sync the PCS and PHY modes
- Add dependency on HAS_IOMEM to both the amd-xgbe and amd-xgbe-phy
  drivers

This patch series is based on net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/amd-xgbe.txt

@@ -7,7 +7,10 @@ Required properties:
    - PCS registers
 - interrupt-parent: Should be the phandle for the interrupt controller
   that services interrupts for this device
-- interrupts: Should contain the amd-xgbe interrupt
+- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
+  listed is required and is the general device interrupt. If the optional
+  amd,per-channel-interrupt property is specified, then one additional
+  interrupt for each DMA channel supported by the device should be specified
 - clocks:
    - DMA clock for the amd-xgbe device (used for calculating the
      correct Rx interrupt watchdog timer value on a DMA channel
@@ -23,14 +26,19 @@ Optional properties:
 - mac-address: mac address to be assigned to the device. Can be overridden
   by UEFI.
 - dma-coherent: Present if dma operations are coherent
+- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
+  a unique interrupt for each DMA channel - this requires an additional
+  interrupt be configured for each DMA channel
 
 Example:
 	xgbe@e0700000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0700000 0 0x80000>,
 		      <0 0xe0780000 0 0x80000>;
 		interrupt-parent = <&gic>;
-		interrupts = <0 325 4>;
+		interrupts = <0 325 4>,
+			     <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>;
+		amd,per-channel-interrupt;
 		clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
 		clock-names = "dma_clk", "ptp_clk";
 		phy-handle = <&phy>;

drivers/net/ethernet/amd/Kconfig

@@ -179,7 +179,7 @@ config SUNLANCE
 
 config AMD_XGBE
 	tristate "AMD 10GbE Ethernet driver"
-	depends on OF_NET
+	depends on OF_NET && HAS_IOMEM
 	select PHYLIB
 	select AMD_XGBE_PHY
 	select BITREVERSE

drivers/net/ethernet/amd/xgbe/xgbe-common.h

@@ -207,6 +207,8 @@
 /* DMA channel register entry bit positions and sizes */
 #define DMA_CH_CR_PBLX8_INDEX		16
 #define DMA_CH_CR_PBLX8_WIDTH		1
+#define DMA_CH_CR_SPH_INDEX		24
+#define DMA_CH_CR_SPH_WIDTH		1
 #define DMA_CH_IER_AIE_INDEX		15
 #define DMA_CH_IER_AIE_WIDTH		1
 #define DMA_CH_IER_FBEE_INDEX		12
@@ -306,6 +308,9 @@
 #define MAC_MACA0LR			0x0304
 #define MAC_MACA1HR			0x0308
 #define MAC_MACA1LR			0x030c
+#define MAC_RSSCR			0x0c80
+#define MAC_RSSAR			0x0c88
+#define MAC_RSSDR			0x0c8c
 #define MAC_TSCR			0x0d00
 #define MAC_SSIR			0x0d04
 #define MAC_STSR			0x0d08
@@ -429,6 +434,8 @@
 #define MAC_RCR_CST_WIDTH		1
 #define MAC_RCR_DCRCC_INDEX		3
 #define MAC_RCR_DCRCC_WIDTH		1
+#define MAC_RCR_HDSMS_INDEX		12
+#define MAC_RCR_HDSMS_WIDTH		3
 #define MAC_RCR_IPC_INDEX		9
 #define MAC_RCR_IPC_WIDTH		1
 #define MAC_RCR_JE_INDEX		8
@@ -445,6 +452,24 @@
 #define MAC_RFCR_UP_WIDTH		1
 #define MAC_RQC0R_RXQ0EN_INDEX		0
 #define MAC_RQC0R_RXQ0EN_WIDTH		2
+#define MAC_RSSAR_ADDRT_INDEX		2
+#define MAC_RSSAR_ADDRT_WIDTH		1
+#define MAC_RSSAR_CT_INDEX		1
+#define MAC_RSSAR_CT_WIDTH		1
+#define MAC_RSSAR_OB_INDEX		0
+#define MAC_RSSAR_OB_WIDTH		1
+#define MAC_RSSAR_RSSIA_INDEX		8
+#define MAC_RSSAR_RSSIA_WIDTH		8
+#define MAC_RSSCR_IP2TE_INDEX		1
+#define MAC_RSSCR_IP2TE_WIDTH		1
+#define MAC_RSSCR_RSSE_INDEX		0
+#define MAC_RSSCR_RSSE_WIDTH		1
+#define MAC_RSSCR_TCP4TE_INDEX		2
+#define MAC_RSSCR_TCP4TE_WIDTH		1
+#define MAC_RSSCR_UDP4TE_INDEX		3
+#define MAC_RSSCR_UDP4TE_WIDTH		1
+#define MAC_RSSDR_DMCH_INDEX		0
+#define MAC_RSSDR_DMCH_WIDTH		4
 #define MAC_SSIR_SNSINC_INDEX		8
 #define MAC_SSIR_SNSINC_WIDTH		8
 #define MAC_SSIR_SSINC_INDEX		16
@@ -844,9 +869,13 @@
 #define RX_PACKET_ATTRIBUTES_CONTEXT_WIDTH	1
 #define RX_PACKET_ATTRIBUTES_RX_TSTAMP_INDEX	5
 #define RX_PACKET_ATTRIBUTES_RX_TSTAMP_WIDTH	1
+#define RX_PACKET_ATTRIBUTES_RSS_HASH_INDEX	6
+#define RX_PACKET_ATTRIBUTES_RSS_HASH_WIDTH	1
 
 #define RX_NORMAL_DESC0_OVT_INDEX		0
 #define RX_NORMAL_DESC0_OVT_WIDTH		16
+#define RX_NORMAL_DESC2_HL_INDEX		0
+#define RX_NORMAL_DESC2_HL_WIDTH		10
 #define RX_NORMAL_DESC3_CDA_INDEX		27
 #define RX_NORMAL_DESC3_CDA_WIDTH		1
 #define RX_NORMAL_DESC3_CTXT_INDEX		30
@@ -855,14 +884,27 @@
 #define RX_NORMAL_DESC3_ES_WIDTH		1
 #define RX_NORMAL_DESC3_ETLT_INDEX		16
 #define RX_NORMAL_DESC3_ETLT_WIDTH		4
+#define RX_NORMAL_DESC3_FD_INDEX		29
+#define RX_NORMAL_DESC3_FD_WIDTH		1
 #define RX_NORMAL_DESC3_INTE_INDEX		30
 #define RX_NORMAL_DESC3_INTE_WIDTH		1
+#define RX_NORMAL_DESC3_L34T_INDEX		20
+#define RX_NORMAL_DESC3_L34T_WIDTH		4
 #define RX_NORMAL_DESC3_LD_INDEX		28
 #define RX_NORMAL_DESC3_LD_WIDTH		1
 #define RX_NORMAL_DESC3_OWN_INDEX		31
 #define RX_NORMAL_DESC3_OWN_WIDTH		1
 #define RX_NORMAL_DESC3_PL_INDEX		0
 #define RX_NORMAL_DESC3_PL_WIDTH		14
+#define RX_NORMAL_DESC3_RSV_INDEX		26
+#define RX_NORMAL_DESC3_RSV_WIDTH		1
+
+#define RX_DESC3_L34T_IPV4_TCP			1
+#define RX_DESC3_L34T_IPV4_UDP			2
+#define RX_DESC3_L34T_IPV4_ICMP			3
+#define RX_DESC3_L34T_IPV6_TCP			9
+#define RX_DESC3_L34T_IPV6_UDP			10
+#define RX_DESC3_L34T_IPV6_ICMP			11
 
 #define RX_CONTEXT_DESC3_TSA_INDEX		4
 #define RX_CONTEXT_DESC3_TSA_WIDTH		1