---

yaml
---
r: 340405
b: refs/heads/master
c: 6a05004
h: refs/heads/master
i:
  340403: c9dfff2
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0c2cc02e571aee1f2193a004508d4d604eff6a8f
+refs/heads/master: 6a05004a8a65f187fa5493821d3115397209ae76

trunk/drivers/net/ethernet/intel/igb/e1000_82575.h

@@ -172,10 +172,13 @@ struct e1000_adv_tx_context_desc {
 #define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
 #define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
 #define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
 
 #define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
 #define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */
 #define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */
 
 /* Additional DCA related definitions, note change in position of CPUID */
 #define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */

trunk/drivers/net/ethernet/intel/igb/igb_main.c

@@ -4851,45 +4851,63 @@ static irqreturn_t igb_msix_ring(int irq, void *data)
 }
 
 #ifdef CONFIG_IGB_DCA
+static void igb_update_tx_dca(struct igb_adapter *adapter,
+			      struct igb_ring *tx_ring,
+			      int cpu)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
+
+	if (hw->mac.type != e1000_82575)
+		txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT;
+
+	/*
+	 * We can enable relaxed ordering for reads, but not writes when
+	 * DCA is enabled.  This is due to a known issue in some chipsets
+	 * which will cause the DCA tag to be cleared.
+	 */
+	txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN |
+		  E1000_DCA_TXCTRL_DATA_RRO_EN |
+		  E1000_DCA_TXCTRL_DESC_DCA_EN;
+
+	wr32(E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl);
+}
+
+static void igb_update_rx_dca(struct igb_adapter *adapter,
+			      struct igb_ring *rx_ring,
+			      int cpu)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu);
+
+	if (hw->mac.type != e1000_82575)
+		rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT;
+
+	/*
+	 * We can enable relaxed ordering for reads, but not writes when
+	 * DCA is enabled.  This is due to a known issue in some chipsets
+	 * which will cause the DCA tag to be cleared.
+	 */
+	rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN |
+		  E1000_DCA_RXCTRL_DESC_DCA_EN;
+
+	wr32(E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl);
+}
+
 static void igb_update_dca(struct igb_q_vector *q_vector)
 {
 	struct igb_adapter *adapter = q_vector->adapter;
-	struct e1000_hw *hw = &adapter->hw;
 	int cpu = get_cpu();
 
 	if (q_vector->cpu == cpu)
 		goto out_no_update;
 
-	if (q_vector->tx.ring) {
-		int q = q_vector->tx.ring->reg_idx;
-		u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
-		if (hw->mac.type == e1000_82575) {
-			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
-			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
-		} else {
-			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
-			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
-			              E1000_DCA_TXCTRL_CPUID_SHIFT;
-		}
-		dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
-		wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
-	}
-	if (q_vector->rx.ring) {
-		int q = q_vector->rx.ring->reg_idx;
-		u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
-		if (hw->mac.type == e1000_82575) {
-			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
-			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
-		} else {
-			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
-			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
-			              E1000_DCA_RXCTRL_CPUID_SHIFT;
-		}
-		dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
-		dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
-		dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
-		wr32(E1000_DCA_RXCTRL(q), dca_rxctrl);
-	}
+	if (q_vector->tx.ring)
+		igb_update_tx_dca(adapter, q_vector->tx.ring, cpu);
+
+	if (q_vector->rx.ring)
+		igb_update_rx_dca(adapter, q_vector->rx.ring, cpu);
+
 	q_vector->cpu = cpu;
 out_no_update:
 	put_cpu();