Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6

MAINTAINERS

@@ -1405,20 +1405,30 @@ F:	arch/x86/include/asm/calgary.h
 F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
-M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+M:	Oliver Hartkopp <socketcan@hartkopp.net>
 M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+L:	socketcan-core@lists.berlios.de
+L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
-F:	drivers/net/can/
-F:	include/linux/can/
+F:	net/can/
 F:	include/linux/can.h
+F:	include/linux/can/core.h
+F:	include/linux/can/bcm.h
+F:	include/linux/can/raw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
-L:	socketcan-core@lists.berlios.de (subscribers-only)
+L:	socketcan-core@lists.berlios.de
+L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
+F:	drivers/net/can/
+F:	include/linux/can/dev.h
+F:	include/linux/can/error.h
+F:	include/linux/can/netlink.h
+F:	include/linux/can/platform/
 
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
@@ -2130,6 +2140,7 @@ F:	drivers/net/eexpress.*
 ETHERNET BRIDGE
 M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	bridge@lists.linux-foundation.org
+L:	netdev@vger.kernel.org
 W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
 F:	include/linux/netfilter_bridge/
@@ -4316,6 +4327,7 @@ PERFORMANCE EVENTS SUBSYSTEM
 M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
+M:	Arnaldo Carvalho de Melo <acme@redhat.com>
 S:	Supported
 F:	kernel/perf_event.c
 F:	include/linux/perf_event.h

arch/arm/kernel/perf_event.c

@@ -966,7 +966,7 @@ armv6pmu_handle_irq(int irq_num,
 	 */
 	armv6_pmcr_write(pmcr);
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx <= armpmu->num_events; ++idx) {
@@ -1946,7 +1946,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 	 */
 	regs = get_irq_regs();
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 	for (idx = 0; idx <= armpmu->num_events; ++idx) {

arch/arm/mach-shmobile/board-ap4evb.c

@@ -206,10 +206,32 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SDHI0 */
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0xe6850000,
+		.end    = 0xe68501ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+};
+
 static struct platform_device *ap4evb_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&keysc_device,
+	&sdhi0_device,
 };
 
 static struct map_desc ap4evb_io_desc[] __initdata = {
@@ -286,6 +308,16 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_KEYIN3_133, NULL);
 	gpio_request(GPIO_FN_KEYIN4,     NULL);
 
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHICD0, NULL);
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+
 	sh7372_add_standard_devices();
 
 	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));

arch/arm/mach-shmobile/board-g3evm.c

@@ -26,9 +26,12 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
 #include <mach/sh7367.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
@@ -127,9 +130,90 @@ static struct platform_device usb_host_device = {
 	.resource	= usb_host_resources,
 };
 
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_5,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes = {
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
+		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
+		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
+		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
+		KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "system",
+		.offset	= 0,
+		.size	= 64 * 1024 * 1024,
+	},
+	{
+		.name	= "userdata",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 128 * 1024 * 1024,
+	},
+	{
+		.name	= "cache",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64 * 1024 * 1024,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xe6a30000,
+		.end	= 0xe6a3009b,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E
+			| SHBUSSEL | SEL_16BIT,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
 static struct platform_device *g3evm_devices[] __initdata = {
 	&nor_flash_device,
 	&usb_host_device,
+	&keysc_device,
+	&nand_flash_device,
 };
 
 static struct map_desc g3evm_io_desc[] __initdata = {
@@ -196,6 +280,44 @@ static void __init g3evm_init(void)
 	__raw_writew(0x6010, 0xe60581c6);	/* CGPOSR */
 	__raw_writew(0x8a0a, 0xe605810c);	/* USBCR2 */
 
+	/* KEYSC @ CN7 */
+	gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL);
+	gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL);
+	gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL);
+	gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL);
+	gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL);
+	gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL);
+	gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL);
+
+	/* FLCTL */
+	gpio_request(GPIO_FN_FCE0, NULL);
+	gpio_request(GPIO_FN_D0_ED0_NAF0, NULL);
+	gpio_request(GPIO_FN_D1_ED1_NAF1, NULL);
+	gpio_request(GPIO_FN_D2_ED2_NAF2, NULL);
+	gpio_request(GPIO_FN_D3_ED3_NAF3, NULL);
+	gpio_request(GPIO_FN_D4_ED4_NAF4, NULL);
+	gpio_request(GPIO_FN_D5_ED5_NAF5, NULL);
+	gpio_request(GPIO_FN_D6_ED6_NAF6, NULL);
+	gpio_request(GPIO_FN_D7_ED7_NAF7, NULL);
+	gpio_request(GPIO_FN_D8_ED8_NAF8, NULL);
+	gpio_request(GPIO_FN_D9_ED9_NAF9, NULL);
+	gpio_request(GPIO_FN_D10_ED10_NAF10, NULL);
+	gpio_request(GPIO_FN_D11_ED11_NAF11, NULL);
+	gpio_request(GPIO_FN_D12_ED12_NAF12, NULL);
+	gpio_request(GPIO_FN_D13_ED13_NAF13, NULL);
+	gpio_request(GPIO_FN_D14_ED14_NAF14, NULL);
+	gpio_request(GPIO_FN_D15_ED15_NAF15, NULL);
+	gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+	/* FOE, FCDE, FSC on dedicated pins */
+	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
+
 	sh7367_add_standard_devices();
 
 	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));

arch/arm/mach-shmobile/board-g4evm.c

@@ -28,6 +28,8 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/io.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
 #include <linux/gpio.h>
 #include <mach/sh7377.h>
 #include <mach/common.h>
@@ -128,9 +130,49 @@ static struct platform_device usb_host_device = {
 	.resource	= usb_host_resources,
 };
 
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_5,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes = {
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+		KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
+		KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
+		KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
+		KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
+		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+		KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
 static struct platform_device *g4evm_devices[] __initdata = {
 	&nor_flash_device,
 	&usb_host_device,
+	&keysc_device,
 };
 
 static struct map_desc g4evm_io_desc[] __initdata = {
@@ -196,6 +238,21 @@ static void __init g4evm_init(void)
 	__raw_writew(0x6010, 0xe60581c6);       /* CGPOSR */
 	__raw_writew(0x8a0a, 0xe605810c);       /* USBCR2 */
 
+	/* KEYSC @ CN31 */
+	gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
+	gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
+	gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
+	gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
+	gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
+	gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
+	gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
+
 	sh7377_add_standard_devices();
 
 	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));

arch/arm/mach-shmobile/clock-sh7367.c

@@ -75,13 +75,20 @@ static struct clk usb0_clk = {
 	.name	    = "usb0",
 };
 
+/* a static keysc0 clk for now - enough to get sh_keysc working */
+static struct clk keysc0_clk = {
+	.name	    = "keysc0",
+};
+
 static struct clk_lookup lookups[] = {
 	{
 		.clk = &peripheral_clk,
 	}, {
 		.clk = &r_clk,
 	}, {
 		.clk = &usb0_clk,
+	}, {
+		.clk = &keysc0_clk,
 	}
 };