Merge branch 'topic/hda' into for-linus

* topic/hda: (92 commits)
  ALSA: hda - Use auto model for HP laptops with ALC268 codec
  ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital
  ALSA: hda - Add support of Alienware M17x laptop
  ALSA: hda - Remove dead codes from patch_sigmatel.c
  ALSA: hda - Fix input source selection of IDT92HD73xx
  ALSA: hda - Fix obsolete CONFIG_SND_DEBUG_DETECT
  ALSA: hda - Unmute docking line-out as default with AD1984A codec
  ALSA: hda - Add another entry for Nvidia HDMI device
  ALSA: hda - Add missing GPIO initialization for AD1984A laptop model
  ALSA: hda - Add support of docking auto-mute/mic for AD1984A laptop model
  ALSA: hda - Fix ALC268/ALC269 headphone pin routing
  ALSA: hda - Create "Digital Mic Capture Volume" correctly for IDT codecs
  ALSA: hda - Add more quirk for HP laptops with AD1984A
  ALSA: hda - Add / fix model entries for HD-audio driver
  ALSA: hda - Add full audio support on Acer Aspire 7730G notebook
  ALSA: hda - Improve auto-cfg mixer name for ALC662
  ALSA: hda - Improve auto-cfg mixer name for ALC861-VD
  ALSA: hda - Improve auto-cfg mixer name for ALC262
  ALSA: hda - Improve auto-cfg mixer name for ALC260
  ALSA: hda - Improve auto-cfg mixer name for ALC880
  ...

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -788,6 +788,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
 		Passing -1 will make the driver to choose the appropriate
 		value based on the controller chip.
+    patch	- Specifies the early "patch" files to modify the HD-audio
+    		setup before initializing the codecs.  This option is
+		available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
+		See HD-Audio.txt for details.
 
     [Single (global) options]
     single_cmd  - Use single immediate commands to communicate with

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -114,8 +114,8 @@ ALC662/663/272
   samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
-ALC882/885
-==========
+ALC882/883/885/888/889
+======================
   3stack-dig	3-jack with SPDIF I/O
   6stack-dig	6-jack digital with SPDIF I/O
   arima		Arima W820Di1
@@ -127,19 +127,16 @@ ALC882/885
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   w2jc		ASUS W2JC
-  auto		auto-config reading BIOS (default)
-
-ALC883/888
-==========
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
+  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
+  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
   3stack-6ch    3-jack 6-channel
   3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
   6stack-dig-demo  6-jack digital for Intel demo board
   acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
   acer-aspire	Acer Aspire 9810
   acer-aspire-4930g Acer Aspire 4930G
   acer-aspire-6530g Acer Aspire 6530G
+  acer-aspire-7730g Acer Aspire 7730G
   acer-aspire-8930g Acer Aspire 8930G
   medion	Medion Laptops
   medion-md2	Medion MD2
@@ -155,10 +152,13 @@ ALC883/888
   3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
   6stack-dell	Dell machines with 6stack (Inspiron 530)
   mitac		Mitac 8252D
+  clevo-m540r	Clevo M540R (6ch + digital)
   clevo-m720	Clevo M720 laptop series
   fujitsu-pi2515 Fujitsu AMILO Pi2515
   fujitsu-xa3530 Fujitsu AMILO XA3530
   3stack-6ch-intel Intel DG33* boards
+  intel-alc889a	Intel IbexPeak with ALC889A
+  intel-x58	Intel DX58 with ALC889
   asus-p5q	ASUS P5Q-EM boards
   mb31		MacBook 3,1
   sony-vaio-tt  Sony VAIO TT
@@ -229,7 +229,7 @@ AD1984
 ======
   basic		default configuration
   thinkpad	Lenovo Thinkpad T61/X61
-  dell		Dell T3400
+  dell_desktop	Dell T3400
 
 AD1986A
 =======
@@ -258,6 +258,7 @@ Conexant 5045
   laptop-micsense   Laptop with Mic sense (old model fujitsu)
   laptop-hpmicsense Laptop with HP and Mic senses
   benq		Benq R55E
+  laptop-hp530	HP 530 laptop
   test		for testing/debugging purpose, almost all controls
 		can be adjusted.  Appearing only when compiled with
 		$CONFIG_SND_DEBUG=y
@@ -278,9 +279,16 @@ Conexant 5051
   hp-dv6736	HP dv6736
   lenovo-x200	Lenovo X200 laptop
 
+Conexant 5066
+=============
+  laptop	Basic Laptop config (default)
+  dell-laptop	Dell laptops
+  olpc-xo-1_5	OLPC XO 1.5
+
 STAC9200
 ========
   ref		Reference board
+  oqo		OQO Model 2
   dell-d21	Dell (unknown)
   dell-d22	Dell (unknown)
   dell-d23	Dell (unknown)
@@ -368,10 +376,12 @@ STAC92HD73*
 ===========
   ref		Reference board
   no-jd		BIOS setup but without jack-detection
+  intel		Intel DG45* mobos
   dell-m6-amic	Dell desktops/laptops with analog mics
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
   dell-eq	Dell desktops/laptops
+  alienware	Alienware M17x
   auto		BIOS setup (default)
 
 STAC92HD83*
@@ -385,3 +395,8 @@ STAC9872
 ========
   vaio		VAIO laptop without SPDIF
   auto		BIOS setup (default)
+
+Cirrus Logic CS4206/4207
+========================
+  mbp55		MacBook Pro 5,5
+  auto		BIOS setup (default)

Documentation/sound/alsa/HD-Audio.txt

@@ -138,6 +138,10 @@ override the BIOS setup or to provide more comprehensive features.
 The driver checks PCI SSID and looks through the static configuration
 table until any matching entry is found.  If you have a new machine,
 you may see a message like below:
+------------------------------------------------------------------------
+    hda_codec: ALC880: BIOS auto-probing.
+------------------------------------------------------------------------
+Meanwhile, in the earlier versions, you would see a message like:
 ------------------------------------------------------------------------
     hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
 ------------------------------------------------------------------------
@@ -403,6 +407,66 @@ re-configure based on that state, run like below:
 ------------------------------------------------------------------------
 
 
+Early Patching
+~~~~~~~~~~~~~~
+When CONFIG_SND_HDA_PATCH_LOADER=y is set, you can pass a "patch" as a
+firmware file for modifying the HD-audio setup before initializing the
+codec.  This can work basically like the reconfiguration via sysfs in
+the above, but it does it before the first codec configuration.
+
+A patch file is a plain text file which looks like below:
+
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [model]
+  auto
+
+  [pincfg]
+  0x12 0x411111f0
+
+  [verb]
+  0x20 0x500 0x03
+  0x20 0x400 0xff
+
+  [hint]
+  hp_detect = yes
+------------------------------------------------------------------------
+
+The file needs to have a line `[codec]`.  The next line should contain
+three numbers indicating the codec vendor-id (0x12345678 in the
+example), the codec subsystem-id (0xabcd1234) and the address (2) of
+the codec.  The rest patch entries are applied to this specified codec
+until another codec entry is given.
+
+The `[model]` line allows to change the model name of the each codec.
+In the example above, it will be changed to model=auto.
+Note that this overrides the module option.
+
+After the `[pincfg]` line, the contents are parsed as the initial
+default pin-configurations just like `user_pin_configs` sysfs above.
+The values can be shown in user_pin_configs sysfs file, too.
+
+Similarly, the lines after `[verb]` are parsed as `init_verbs`
+sysfs entries, and the lines after `[hint]` are parsed as `hints`
+sysfs entries, respectively.
+
+The hd-audio driver reads the file via request_firmware().  Thus,
+a patch file has to be located on the appropriate firmware path,
+typically, /lib/firmware.  For example, when you pass the option
+`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+present.
+
+The patch module option is specific to each card instance, and you
+need to give one file name for each instance, separated by commas.
+For example, if you have two cards, one for an on-board analog and one 
+for an HDMI video board, you may pass patch option like below:
+------------------------------------------------------------------------
+    options snd-hda-intel patch=on-board-patch,hdmi-patch
+------------------------------------------------------------------------
+
+
 Power-Saving
 ~~~~~~~~~~~~
 The power-saving is a kind of auto-suspend of the device.  When the

sound/pci/hda/Kconfig

@@ -46,6 +46,20 @@ config SND_HDA_INPUT_JACK
 	  Say Y here to enable the jack plugging notification via
 	  input layer.
 
+config SND_HDA_PATCH_LOADER
+	bool "Support initialization patch loading for HD-audio"
+	depends on EXPERIMENTAL
+	select FW_LOADER
+	select SND_HDA_HWDEP
+	select SND_HDA_RECONFIG
+	help
+	  Say Y here to allow the HD-audio driver to load a pseudo
+	  firmware file ("patch") for overriding the BIOS setup at
+	  start up.  The "patch" file can be specified via patch module
+	  option, such as patch=hda-init.
+
+	  This option turns on hwdep and reconfig features automatically.
+
 config SND_HDA_CODEC_REALTEK
 	bool "Build Realtek HD-audio codec support"
 	default y
@@ -134,6 +148,19 @@ config SND_HDA_ELD
 	def_bool y
 	depends on SND_HDA_CODEC_INTELHDMI
 
+config SND_HDA_CODEC_CIRRUS
+	bool "Build Cirrus Logic codec support"
+	depends on SND_HDA_INTEL
+	default y
+	help
+	  Say Y here to include Cirrus Logic codec support in
+	  snd-hda-intel driver, such as CS4206.
+
+	  When the HD-audio driver is built as a module, the codec
+	  support code is also built as another module,
+	  snd-hda-codec-cirrus.
+	  This module is automatically loaded at probing.
+
 config SND_HDA_CODEC_CONEXANT
 	bool "Build Conexant HD-audio codec support"
 	default y

sound/pci/hda/Makefile

@@ -13,6 +13,7 @@ snd-hda-codec-analog-objs :=	patch_analog.o
 snd-hda-codec-idt-objs :=	patch_sigmatel.o
 snd-hda-codec-si3054-objs :=	patch_si3054.o
 snd-hda-codec-atihdmi-objs :=	patch_atihdmi.o
+snd-hda-codec-cirrus-objs :=	patch_cirrus.o
 snd-hda-codec-ca0110-objs :=	patch_ca0110.o
 snd-hda-codec-conexant-objs :=	patch_conexant.o
 snd-hda-codec-via-objs :=	patch_via.o
@@ -41,6 +42,9 @@ endif
 ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o
 endif
+ifdef CONFIG_SND_HDA_CODEC_CIRRUS
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-cirrus.o
+endif
 ifdef CONFIG_SND_HDA_CODEC_CA0110
 obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
 endif

sound/pci/hda/hda_beep.c

@@ -24,6 +24,7 @@
 #include <linux/workqueue.h>
 #include <sound/core.h>
 #include "hda_beep.h"
+#include "hda_local.h"
 
 enum {
 	DIGBEEP_HZ_STEP = 46875,	/* 46.875 Hz */
@@ -118,6 +119,9 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid)
 	struct hda_beep *beep;
 	int err;
 
+	if (!snd_hda_get_bool_hint(codec, "beep"))
+		return 0; /* disabled explicitly */
+
 	beep = kzalloc(sizeof(*beep), GFP_KERNEL);
 	if (beep == NULL)
 		return -ENOMEM;