---

yaml
---
r: 272647
b: refs/heads/master
c: 2db3fcf
h: refs/heads/master
i:
  272645: afd6a68
  272643: c8d1889
  272639: 3d05b2e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2f540738f8d228016c6cd0d3b303896c174ecee3
+refs/heads/master: 2db3fcf1b74ed2587a4072224a3c92da7dff5647

trunk/arch/arm/Kconfig

@@ -29,7 +29,6 @@ config ARM
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_SPARSE_IRQ
 	select GENERIC_IRQ_SHOW
-	select CPU_PM if (SUSPEND || CPU_IDLE)
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -831,7 +830,6 @@ config ARCH_U300
 	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
@@ -1809,38 +1807,6 @@ config ZBOOT_ROM_SH_MOBILE_SDHI
 
 endchoice
 
-config ARM_APPENDED_DTB
-	bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
-	depends on OF && !ZBOOT_ROM && EXPERIMENTAL
-	help
-	  With this option, the boot code will look for a device tree binary
-	  (DTB) appended to zImage
-	  (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
-
-	  This is meant as a backward compatibility convenience for those
-	  systems with a bootloader that can't be upgraded to accommodate
-	  the documented boot protocol using a device tree.
-
-	  Beware that there is very little in terms of protection against
-	  this option being confused by leftover garbage in memory that might
-	  look like a DTB header after a reboot if no actual DTB is appended
-	  to zImage.  Do not leave this option active in a production kernel
-	  if you don't intend to always append a DTB.  Proper passing of the
-	  location into r2 of a bootloader provided DTB is always preferable
-	  to this option.
-
-config ARM_ATAG_DTB_COMPAT
-	bool "Supplement the appended DTB with traditional ATAG information"
-	depends on ARM_APPENDED_DTB
-	help
-	  Some old bootloaders can't be updated to a DTB capable one, yet
-	  they provide ATAGs with memory configuration, the ramdisk address,
-	  the kernel cmdline string, etc.  Such information is dynamically
-	  provided by the bootloader and can't always be stored in a static
-	  DTB.  To allow a device tree enabled kernel to be used with such
-	  bootloaders, this option allows zImage to extract the information
-	  from the ATAG list and store it at run time into the appended DTB.
-
 config CMDLINE
 	string "Default kernel command string"
 	default ""

trunk/arch/arm/Kconfig.debug

@@ -129,10 +129,4 @@ config DEBUG_S3C_UART
 	  The uncompressor code port configuration is now handled
 	  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
-config ARM_KPROBES_TEST
-	tristate "Kprobes test module"
-	depends on KPROBES && MODULES
-	help
-	  Perform tests of kprobes API and instruction set simulation.
-
 endmenu

trunk/arch/arm/boot/compressed/.gitignore

@@ -5,12 +5,3 @@ piggy.lzo
 piggy.lzma
 vmlinux
 vmlinux.lds
-
-# borrowed libfdt files
-fdt.c
-fdt.h
-fdt_ro.c
-fdt_rw.c
-fdt_wip.c
-libfdt.h
-libfdt_internal.h

trunk/arch/arm/boot/compressed/Makefile

@@ -26,10 +26,6 @@ HEAD	= head.o
 OBJS	+= misc.o decompress.o
 FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
 
-# string library code (-Os is enforced to keep it much smaller)
-OBJS		+= string.o
-CFLAGS_string.o	:= -Os
-
 #
 # Architecture dependencies
 #
@@ -93,41 +89,21 @@ suffix_$(CONFIG_KERNEL_GZIP) = gzip
 suffix_$(CONFIG_KERNEL_LZO)  = lzo
 suffix_$(CONFIG_KERNEL_LZMA) = lzma
 
-# Borrowed libfdt files for the ATAG compatibility mode
-
-libfdt		:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
-libfdt_hdrs	:= fdt.h libfdt.h libfdt_internal.h
-
-libfdt_objs	:= $(addsuffix .o, $(basename $(libfdt)))
-
-$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
-	$(call cmd,shipped)
-
-$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
-	$(addprefix $(obj)/,$(libfdt_hdrs))
-
-ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
-OBJS	+= $(libfdt_objs) atags_to_fdt.o
-endif
-
 targets       := vmlinux vmlinux.lds \
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
-		 lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS)
+		 font.o font.c head.o misc.o $(OBJS)
 
 # Make sure files are removed during clean
-extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
-ccflags-y := -fpic -fno-builtin -I$(obj)
+ccflags-y := -fpic -fno-builtin
 asflags-y := -Wa,-march=all
 
-# Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
-LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
 LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
@@ -147,7 +123,7 @@ LDFLAGS_vmlinux += -T
 # For __aeabi_uidivmod
 lib1funcs = $(obj)/lib1funcs.o
 
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
 	$(call cmd,shipped)
 
 # We need to prevent any GOTOFF relocs being used with references