---

yaml
---
r: 117560
b: refs/heads/master
c: a3bee42
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1d3ba686ed706a0e8563878b2ec415e125178607
+refs/heads/master: a3bee42f058c2f9fe281df942eff397924630a12

trunk/arch/avr32/Kconfig

@@ -122,6 +122,7 @@ config BOARD_ATNGW100
 endchoice
 
 source "arch/avr32/boards/atstk1000/Kconfig"
+source "arch/avr32/boards/atngw100/Kconfig"
 
 choice
 	prompt "Boot loader type"

trunk/arch/avr32/boards/atngw100/Kconfig

@@ -0,0 +1,35 @@
+# NGW100 customization
+
+if BOARD_ATNGW100
+
+config BOARD_ATNGW100_EVKLCD10X
+	bool "Add support for EVKLCD10X addon board"
+	help
+	  This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
+	  addon board for the NGW100. By enabling this the LCD controller and
+	  AC97 controller is added as platform devices.
+
+	  This choice disables the detect pin and the write-protect pin for the
+	  MCI platform device, since it conflicts with the LCD platform device.
+	  The MCI pins can be reenabled by editing the "add device function" but
+	  this may break the setup for other displays that use these pins.
+
+	  Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100.
+
+choice
+	prompt "LCD panel resolution on EVKLCD10X"
+	depends on BOARD_ATNGW100_EVKLCD10X
+	default BOARD_ATNGW100_EVKLCD10X_VGA
+
+config BOARD_ATNGW100_EVKLCD10X_QVGA
+	bool "QVGA (320x240)"
+
+config BOARD_ATNGW100_EVKLCD10X_VGA
+	bool "VGA (640x480)"
+
+config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
+	bool "Powertip QVGA (320x240)"
+
+endchoice
+
+endif	# BOARD_ATNGW100

trunk/arch/avr32/boards/atngw100/Makefile

@@ -1 +1,2 @@
-obj-y				+= setup.o flash.o
+obj-y					+= setup.o flash.o
+obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X)	+= evklcd10x.o

trunk/arch/avr32/boards/atngw100/evklcd10x.c

@@ -0,0 +1,155 @@
+/*
+ * Board-specific setup code for the ATEVKLCD10X addon board to the ATNGW100
+ * Network Gateway
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+
+static struct ac97c_platform_data __initdata ac97c0_data = {
+	.dma_rx_periph_id	= 3,
+	.dma_tx_periph_id	= 4,
+	.dma_controller_id	= 0,
+	.reset_pin		= GPIO_PIN_PB(19),
+};
+
+#ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA
+static struct fb_videomode __initdata tcg057vglad_modes[] = {
+	{
+		.name		= "640x480 @ 60",
+		.refresh	= 60,
+		.xres		= 640,		.yres		= 480,
+		.pixclock	= KHZ2PICOS(25180),
+
+		.left_margin	= 64,		.right_margin	= 31,
+		.upper_margin	= 34,		.lower_margin	= 2,
+		.hsync_len	= 96,		.vsync_len	= 4,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "KYO",
+	.monitor		= "TCG057VGLAD",
+	.modedb			= tcg057vglad_modes,
+	.modedb_len		= ARRAY_SIZE(tcg057vglad_modes),
+	.hfmin			= 19948,
+	.hfmax			= 31478,
+	.vfmin			= 50,
+	.vfmax			= 67,
+	.dclkmax		= 28330000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA
+static struct fb_videomode __initdata tcg057qvlad_modes[] = {
+	{
+		.name		= "320x240 @ 60",
+		.refresh	= 60,
+		.xres		= 320,		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6300),
+
+		.left_margin	= 52,		.right_margin	= 28,
+		.upper_margin	= 7,		.lower_margin	= 2,
+		.hsync_len	= 96,		.vsync_len	= 4,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "KYO",
+	.monitor		= "TCG057QVLAD",
+	.modedb			= tcg057qvlad_modes,
+	.modedb_len		= ARRAY_SIZE(tcg057qvlad_modes),
+	.hfmin			= 19948,
+	.hfmax			= 31478,
+	.vfmin			= 50,
+	.vfmax			= 67,
+	.dclkmax		= 7000000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#elif CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA
+static struct fb_videomode __initdata ph320240t_modes[] = {
+	{
+		.name		= "320x240 @ 60",
+		.refresh	= 60,
+		.xres		= 320,		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6300),
+
+		.left_margin	= 38,		.right_margin	= 20,
+		.upper_margin	= 15,		.lower_margin	= 5,
+		.hsync_len	= 30,		.vsync_len	= 3,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
+	.manufacturer		= "POW",
+	.monitor		= "PH320240T",
+	.modedb			= ph320240t_modes,
+	.modedb_len		= ARRAY_SIZE(ph320240t_modes),
+	.hfmin			= 14400,
+	.hfmax			= 21600,
+	.vfmin			= 50,
+	.vfmax			= 90,
+	.dclkmax		= 6400000,
+};
+
+static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+	.default_bpp		= 16,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &atevklcd10x_default_monspecs,
+	.guard_time		= 2,
+};
+#endif
+
+static int __init atevklcd10x_init(void)
+{
+	at32_add_device_ac97c(0, &ac97c0_data);
+
+	at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,
+			fbmem_start, fbmem_size, 1);
+	return 0;
+}
+postcore_initcall(atevklcd10x_init);

trunk/arch/avr32/boards/atngw100/setup.c

@@ -56,8 +56,13 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 static struct mci_platform_data __initdata mci0_data = {
 	.slot[0] = {
 		.bus_width	= 4,
+#ifndef CONFIG_BOARD_ATNGW100_EVKLCD10X
 		.detect_pin	= GPIO_PIN_PC(25),
 		.wp_pin		= GPIO_PIN_PE(0),
+#else
+		.detect_pin	= GPIO_PIN_NONE,
+		.wp_pin		= GPIO_PIN_NONE,
+#endif
 	},
 };