---

yaml --- r: 138712 b: refs/heads/master c: bb6d59c h: refs/heads/master v: v3
git-mirror · Mar 11, 2009 · 2e553ea · 2e553ea
1 parent e51ebee
commit 2e553ea
Show file tree

Hide file tree

Showing 90 changed files with 764 additions and 1,614 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8229d754383e8cd905c38b56bd7365c7fc10dfc1
+refs/heads/master: bb6d59ca927d855ffac567b35c0a790c67016103
diff --git a/trunk/Documentation/RCU/checklist.txt b/trunk/Documentation/RCU/checklist.txt
@@ -298,3 +298,15 @@ over a rather long period of time, but improvements are always welcome!
 
 	Note that, rcu_assign_pointer() and rcu_dereference() relate to
 	SRCU just as they do to other forms of RCU.
+
+15.	The whole point of call_rcu(), synchronize_rcu(), and friends
+	is to wait until all pre-existing readers have finished before
+	carrying out some otherwise-destructive operation.  It is
+	therefore critically important to -first- remove any path
+	that readers can follow that could be affected by the
+	destructive operation, and -only- -then- invoke call_rcu(),
+	synchronize_rcu(), or friends.
+
+	Because these primitives only wait for pre-existing readers,
+	it is the caller's responsibility to guarantee safety to
+	any subsequent readers.
diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
@@ -335,3 +335,12 @@ Why:	In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
 	Secmark, it is time to deprecate the older mechanism and start the
 	process of removing the old code.
 Who:	Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:	sysfs ui for changing p4-clockmod parameters
+When:	September 2009
+Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+	e088e4c9cdb618675874becb91b2fd581ee707e6.
+	Removal is subject to fixing any remaining bugs in ACPI which may
+	cause the thermal throttling not to happen at the right time.
+Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
diff --git a/trunk/Documentation/networking/ipv6.txt b/trunk/Documentation/networking/ipv6.txt
@@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+	Specifies whether to load the IPv6 module, but disable all
+	its functionality.  This might be used when another module
+	has a dependency on the IPv6 module being loaded, but no
+	IPv6 addresses or operations are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled.
+
+		No IPv6 addresses will be added to interfaces, and
+		it will not be possible to open an IPv6 socket.
+
+		A reboot is required to enable IPv6.
+
diff --git a/trunk/arch/arm/mach-omap2/board-ldp.c b/trunk/arch/arm/mach-omap2/board-ldp.c
@@ -81,7 +81,7 @@ static inline void __init ldp_init_smc911x(void)
 	}
 
 	ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
-	ldp_smc911x_resources[0].end   = cs_mem_base + 0xf;
+	ldp_smc911x_resources[0].end   = cs_mem_base + 0xff;
 	udelay(100);
 
 	eth_gpio = LDP_SMC911X_GPIO;

diff --git a/trunk/arch/m68knommu/platform/5206e/config.c b/trunk/arch/m68knommu/platform/5206e/config.c
@@ -17,6 +17,7 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
 
 /***************************************************************************/
 

diff --git a/trunk/arch/m68knommu/platform/528x/config.c b/trunk/arch/m68knommu/platform/528x/config.c
@@ -24,7 +24,6 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 #include <linux/mtd/partitions.h>
@@ -33,233 +32,6 @@
 /***************************************************************************/
 
 void coldfire_reset(void);
-static void coldfire_qspi_cs_control(u8 cs, u8 command);
-
-/***************************************************************************/
-
-#if defined(CONFIG_SPI)
-
-#if defined(CONFIG_WILDFIRE)
-#define SPI_NUM_CHIPSELECTS 	0x02
-#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK		0x18
-
-#define FLASH_BLOCKSIZE		(1024*64)
-#define FLASH_NUMBLOCKS		16
-#define FLASH_TYPE		"m25p80"
-
-#define M25P80_CS		0
-#define MMC_CS			1
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-	/* sflash */
-	[0] = {
-		.name = "stm25p80",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-		.mask_flags = 0
-	}
-};
-
-#endif
-
-#elif defined(CONFIG_WILDFIREMOD)
-
-#define SPI_NUM_CHIPSELECTS	0x08
-#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK		0x78
-
-#define FLASH_BLOCKSIZE		(1024*64)
-#define FLASH_NUMBLOCKS		64
-#define FLASH_TYPE		"m25p32"
-/* Reserve 1M for the kernel parition */
-#define FLASH_KERNEL_SIZE   (1024 * 1024)
-
-#define M25P80_CS		5
-#define MMC_CS			6
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-	/* sflash */
-	[0] = {
-		.name = "kernel",
-		.offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-		.size = FLASH_KERNEL_SIZE,
-		.mask_flags = 0
-	},
-	[1] = {
-		.name = "image",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-		.mask_flags = 0
-	},
-	[2] = {
-		.name = "all",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-		.mask_flags = 0
-	}
-};
-#endif
-
-#else
-#define SPI_NUM_CHIPSELECTS 	0x04
-#define SPI_PAR_VAL		0x7F  /* Enable DIN, DOUT, CLK, CS0 - CS4 */
-#endif
-
-#ifdef MMC_CS
-static struct coldfire_spi_chip flash_chip_info = {
-	.mode = SPI_MODE_0,
-	.bits_per_word = 16,
-	.del_cs_to_clk = 17,
-	.del_after_trans = 1,
-	.void_write_data = 0
-};
-
-static struct coldfire_spi_chip mmc_chip_info = {
-	.mode = SPI_MODE_0,
-	.bits_per_word = 16,
-	.del_cs_to_clk = 17,
-	.del_after_trans = 1,
-	.void_write_data = 0xFFFF
-};
-#endif
-
-#ifdef M25P80_CS
-static struct flash_platform_data stm25p80_platform_data = {
-	.name = "ST M25P80 SPI Flash chip",
-#ifdef CONFIG_MTD_PARTITIONS
-	.parts = stm25p_partitions,
-	.nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
-#endif
-	.type = FLASH_TYPE
-};
-#endif
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#ifdef M25P80_CS
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 16000000,
-		.bus_num = 1,
-		.chip_select = M25P80_CS,
-		.platform_data = &stm25p80_platform_data,
-		.controller_data = &flash_chip_info
-	},
-#endif
-#ifdef MMC_CS
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 16000000,
-		.bus_num = 1,
-		.chip_select = MMC_CS,
-		.controller_data = &mmc_chip_info
-	}
-#endif
-};
-
-static struct coldfire_spi_master coldfire_master_info = {
-	.bus_num = 1,
-	.num_chipselect = SPI_NUM_CHIPSELECTS,
-	.irq_source = MCF5282_QSPI_IRQ_SOURCE,
-	.irq_vector = MCF5282_QSPI_IRQ_VECTOR,
-	.irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
-	.irq_lp = 0x2B,  /* Level 5 and Priority 3 */
-	.par_val = SPI_PAR_VAL,
-	.cs_control = coldfire_qspi_cs_control,
-};
-
-static struct resource coldfire_spi_resources[] = {
-	[0] = {
-		.name = "qspi-par",
-		.start = MCF5282_QSPI_PAR,
-		.end = MCF5282_QSPI_PAR,
-		.flags = IORESOURCE_MEM
-	},
-
-	[1] = {
-		.name = "qspi-module",
-		.start = MCF5282_QSPI_QMR,
-		.end = MCF5282_QSPI_QMR + 0x18,
-		.flags = IORESOURCE_MEM
-	},
-
-	[2] = {
-		.name = "qspi-int-level",
-		.start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-		.end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-		.flags = IORESOURCE_MEM
-	},
-
-	[3] = {
-		.name = "qspi-int-mask",
-		.start = MCF5282_INTC0 + MCFINTC_IMRL,
-		.end = MCF5282_INTC0 + MCFINTC_IMRL,
-		.flags = IORESOURCE_MEM
-	}
-};
-
-static struct platform_device coldfire_spi = {
-	.name = "spi_coldfire",
-	.id = -1,
-	.resource = coldfire_spi_resources,
-	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
-	.dev = {
-		.platform_data = &coldfire_master_info,
-	}
-};
-
-static void coldfire_qspi_cs_control(u8 cs, u8 command)
-{
-	u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
-
-#if defined(CONFIG_WILDFIRE)
-	u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
-#endif
-#if defined(CONFIG_WILDFIREMOD)
-	u8 cs_mask = (cs << 3) & SPI_CS_MASK;
-#endif
-
-	/*
-	 * Don't do anything if the chip select is not
-	 * one of the port qs pins.
-	 */
-	if (command & QSPI_CS_INIT) {
-#if defined(CONFIG_WILDFIRE)
-		MCF5282_GPIO_DDRQS  |= cs_bit;
-		MCF5282_GPIO_PQSPAR &= ~cs_bit;
-#endif
-
-#if defined(CONFIG_WILDFIREMOD)
-		MCF5282_GPIO_DDRQS  |= SPI_CS_MASK;
-		MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
-#endif
-	}
-
-	if (command & QSPI_CS_ASSERT) {
-		MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
-		MCF5282_GPIO_PORTQS |= cs_mask;
-	} else if (command & QSPI_CS_DROP) {
-		MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
-	}
-}
-
-static int __init spi_dev_init(void)
-{
-	int retval;
-
-	retval = platform_device_register(&coldfire_spi);
-	if (retval < 0)
-		return retval;
-
-	if (ARRAY_SIZE(spi_board_info))
-		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	return retval;
-}
-
-#endif /* CONFIG_SPI */
 
 /***************************************************************************/
 

diff --git a/trunk/arch/sh/boards/board-ap325rxa.c b/trunk/arch/sh/boards/board-ap325rxa.c
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
+#include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>

diff --git a/trunk/arch/x86/Kconfig b/trunk/arch/x86/Kconfig
@@ -931,12 +931,6 @@ config X86_CPUID
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
 	  /dev/cpu/31/cpuid.
 
-config X86_CPU_DEBUG
-	tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
-	---help---
-	  If you select this option, this will provide various x86 CPUs
-	  information through debugfs.
-
 choice
 	prompt "High Memory Support"
 	default HIGHMEM4G if !X86_NUMAQ
@@ -1437,7 +1431,7 @@ config CRASH_DUMP
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on KEXEC && HIBERNATION && X86_32
+	depends on KEXEC && HIBERNATION
 	---help---
 	  Jump between original kernel and kexeced kernel and invoke
 	  code in physical address mode via KEXEC