---

yaml
---
r: 349591
b: refs/heads/master
c: 08337fd
h: refs/heads/master
i:
  349589: d2a7039
  349587: 2545f02
  349583: 5c63e0f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e04702c8b275019944b2768981445ca0bee294e6
+refs/heads/master: 08337fdac215d8583770c34e7449c88947aceda8

trunk/Documentation/device-mapper/dm-raid.txt

@@ -141,4 +141,3 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
-1.3.2   Fix/improve redundancy checking for RAID10

trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt

@@ -81,8 +81,7 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
-  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
+  The PERIPH 0 means gpio.
 
 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@@ -127,7 +126,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
 		};
 	};
 };

trunk/Documentation/filesystems/f2fs.txt

@@ -175,9 +175,9 @@ consists of multiple segments as described below.
                                             align with the zone size <-|
                  |-> align with the segment size
      _________________________________________________________________________
-    |            |            |   Segment   |    Node     |   Segment  |      |
-    | Superblock | Checkpoint |    Info.    |   Address   |   Summary  | Main |
-    |    (SB)    |   (CP)     | Table (SIT) | Table (NAT) | Area (SSA) |      |
+    |            |            |    Node     |   Segment   |   Segment  |      |
+    | Superblock | Checkpoint |   Address   |    Info.    |   Summary  | Main |
+    |    (SB)    |   (CP)     | Table (NAT) | Table (SIT) | Area (SSA) |      |
     |____________|_____2______|______N______|______N______|______N_____|__N___|
                                                                        .      .
                                                              .                .
@@ -200,14 +200,14 @@ consists of multiple segments as described below.
  : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
    inode lists, and summary entries of current active segments.
 
-- Segment Information Table (SIT)
- : It contains segment information such as valid block count and bitmap for the
-   validity of all the blocks.
-
 - Node Address Table (NAT)
  : It is composed of a block address table for all the node blocks stored in
    Main area.
 
+- Segment Information Table (SIT)
+ : It contains segment information such as valid block count and bitmap for the
+   validity of all the blocks.
+
 - Segment Summary Area (SSA)
  : It contains summary entries which contains the owner information of all the
    data and node blocks stored in Main area.
@@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
 valid, as shown as below.
 
   +--------+----------+---------+
-  |   CP   |    SIT   |   NAT   |
+  |   CP   |    NAT   |   SIT   |
   +--------+----------+---------+
   .         .          .          .
   .            .              .              .
   .               .                 .                 .
   +-------+-------+--------+--------+--------+--------+
-  | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
+  | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
   +-------+-------+--------+--------+--------+--------+
      |             ^                          ^
      |             |                          |

trunk/Documentation/x86/boot.txt

@@ -57,10 +57,6 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
-Protocol 2.12:	(Kernel 3.9) Added the xloadflags field and extension fields
-	 	to struct boot_params for for loading bzImage and ramdisk
-		above 4G in 64bit.
-
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -186,7 +182,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	2.12+	xloadflags	Boot protocol option flags
+0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -586,27 +582,6 @@ Protocol:	2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
-Field name:     xloadflags
-Type:           read
-Offset/size:    0x236/2
-Protocol:       2.12+
-
-  This field is a bitmask.
-
-  Bit 0 (read):	XLF_KERNEL_64
-	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
-
-  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
-        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
-
-  Bit 2 (read):	XLF_EFI_HANDOVER_32
-	- If 1, the kernel supports the 32-bit EFI handoff entry point
-          given at handover_offset.
-
-  Bit 3 (read): XLF_EFI_HANDOVER_64
-	- If 1, the kernel supports the 64-bit EFI handoff entry point
-          given at handover_offset + 0x200.
-
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4

trunk/Documentation/x86/zero-page.txt

@@ -19,9 +19,6 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
-0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
-0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
-0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@@ -30,7 +27,6 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
-1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)

trunk/MAINTAINERS

@@ -2966,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -4905,7 +4905,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -5180,7 +5180,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -6585,7 +6585,7 @@ F:	drivers/media/platform/s3c-camif/
 F:	include/media/s3c_camif.h
 
 SERIAL DRIVERS
-M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Alan Cox <alan@linux.intel.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial
@@ -7088,7 +7088,7 @@ F:	include/uapi/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lgirdwood@gmail.com>
+M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

trunk/Makefile

@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
-NAME = Unicycling Gorilla
+EXTRAVERSION = -rc4
+NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
 				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
+				  -e s/sh[234].*/sh/ )
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------

trunk/arch/arm/boot/dts/armada-370-db.dts

@@ -26,7 +26,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
+		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
 
 	soc {

trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -50,25 +50,27 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
+			interrupts = <16>, <17>, <18>, <19>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
 			ngpios = <17>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>;
+			interrupts = <20>, <21>, <22>;
 		};
 	};
 };

trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -51,36 +51,39 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
+			interrupts = <16>, <17>, <18>, <19>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
+			interrupts = <20>, <21>, <22>, <23>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <91>;
+			interrupts = <24>;
 		};
 
 		ethernet@d0034000 {

trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -66,36 +66,39 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
+			interrupts = <16>, <17>, <18>, <19>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
+			interrupts = <20>, <21>, <22>, <23>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <91>;
+			interrupts = <24>;
 		};
 
 		ethernet@d0034000 {

trunk/arch/arm/boot/dts/at91rm9200.dtsi

@@ -336,8 +336,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 25 0 /* sda */
-			 &pioA 26 0 /* scl */
+		gpios = <&pioA 23 0 /* sda */
+			 &pioA 24 0 /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;