---

yaml
---
r: 313331
b: refs/heads/master
c: feb7b8d
h: refs/heads/master
i:
  313329: 5f91edc
  313327: 0636cdf
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 79989ba3e201f3bf992e600a0745ecaf256f08f5
+refs/heads/master: feb7b8d6d2b2eedbca5a55b5dc74d9d967c91151

trunk/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt

@@ -0,0 +1,27 @@
+* TI Common Platform Interrupt Controller
+
+Common Platform Interrupt Controller (cp_intc) is used on
+OMAP-L1x SoCs and can support several configurable number
+of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+	"ti,cp-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The type shall be a <u32> and the value shall be 1.
+
+  The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+	intc: interrupt-controller@1 {
+		compatible = "ti,cp-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		ti,intc-size = <101>;
+		reg = <0xfffee000 0x2000>;
+	};

trunk/Documentation/devicetree/bindings/arm/olimex.txt

@@ -0,0 +1,6 @@
+Olimex i.MX Platforms Device Tree Bindings
+------------------------------------------
+
+i.MX23 Olinuxino Low Cost Board
+Required root node properties:
+    - compatible = "olimex,imx23-olinuxino", "fsl,imx23";

trunk/Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -47,3 +47,6 @@ Boards:
 
 - AM335X EVM : Software Developement Board for AM335x
   compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+
+- AM335X Bone : Low cost community board
+  compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"

trunk/Documentation/devicetree/bindings/arm/tegra/emc.txt → trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt

@@ -15,7 +15,7 @@ Child device nodes describe the memory settings for different configurations and
 
 Example:
 
-	emc@7000f400 {
+	memory-controller@7000f400 {
 		#address-cells = < 1 >;
 		#size-cells = < 0 >;
 		compatible = "nvidia,tegra20-emc";

trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	mc {
+	memory-controller@0x7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;

trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	mc {
+	memory-controller {
 		compatible = "nvidia,tegra30-mc";
 		reg = <0x7000f000 0x010
 		       0x7000f03c 0x1b4

trunk/Documentation/devicetree/bindings/fb/mxsfb.txt

@@ -0,0 +1,19 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-lcdif".  Supported chips include
+  imx23 and imx28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+
+Optional properties:
+- panel-enable-gpios : Should specify the gpio for panel enable
+
+Examples:
+
+lcdif@80030000 {
+	compatible = "fsl,imx28-lcdif";
+	reg = <0x80030000 2000>;
+	interrupts = <38 86>;
+	panel-enable-gpios = <&gpio3 30 0>;
+};

trunk/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt

@@ -8,8 +8,16 @@ Required properties:
   by low 16 pins and the second one is for high 16 pins.
 - gpio-controller : Marks the device node as a gpio controller.
 - #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify optional parameters (currently
-  unused).
+  the second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
+  The second cell bits[3:0] is used to specify trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
 
 Example:
 
@@ -19,4 +27,6 @@ gpio0: gpio@73f84000 {
 	interrupts = <50 51>;
 	gpio-controller;
 	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
 };

trunk/Documentation/devicetree/bindings/gpio/gpio-mxs.txt

@@ -13,8 +13,9 @@ Required properties for GPIO node:
 - interrupts : Should be the port interrupt shared by all 32 pins.
 - gpio-controller : Marks the device node as a gpio controller.
 - #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify optional parameters (currently
-  unused).
+  the second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
 - interrupt-controller: Marks the device node as an interrupt controller.
 - #interrupt-cells : Should be 2.  The first cell is the GPIO number.
   The second cell bits[3:0] is used to specify trigger type and level flags:

trunk/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt

@@ -0,0 +1,16 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+rtc@80056000 {
+	compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+	reg = <0x80056000 2000>;
+	interrupts = <29>;
+};

trunk/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt

@@ -0,0 +1,27 @@
+* Freescale MXS Application UART (AUART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
+  imx23 and imx28.
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the auart interrupt numbers
+
+Example:
+auart0: serial@8006a000 {
+	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+	reg = <0x8006a000 0x2000>;
+	interrupts = <112 70 71>;
+};
+
+Note: Each auart port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+	serial0 = &auart0;
+	serial1 = &auart1;
+	serial2 = &auart2;
+	serial3 = &auart3;
+	serial4 = &auart4;
+};

trunk/Documentation/devicetree/bindings/watchdog/omap-wdt.txt

@@ -0,0 +1,14 @@
+TI Watchdog Timer (WDT) Controller for OMAP
+
+Required properties:
+compatible:
+- "ti,omap3-wdt" for OMAP3
+- "ti,omap4-wdt" for OMAP4
+- ti,hwmods: Name of the hwmod associated to the WDT
+
+Examples:
+
+wdt2: wdt@4a314000 {
+	compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+	ti,hwmods = "wd_timer2";
+};

trunk/arch/arm/Kconfig

@@ -913,7 +913,7 @@ config ARCH_NOMADIK
 	select ARM_AMBA
 	select ARM_VIC
 	select CPU_ARM926T
-	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select PINCTRL
 	select MIGHT_HAVE_CACHE_L2X0
@@ -1021,8 +1021,6 @@ source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/mach-ks8695/Kconfig"
 
-source "arch/arm/mach-lpc32xx/Kconfig"
-
 source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"

trunk/arch/arm/boot/dts/aks-cdu.dts

@@ -0,0 +1,113 @@
+/*
+ * aks-cdu.dts - Device Tree file for AK signal CDU
+ *
+ * Copyright (C) 2012 AK signal Brno a.s.
+ *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "ge863-pro3.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
+	};
+
+	ahb {
+		apb {
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+				};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 15 0>;
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			uboot@40000 {
+				label = "uboot";
+				reg = <0x40000 0x80000>;
+			};
+			ubootenv@c0000 {
+				label = "ubootenv";
+				reg = <0xc0000 0x40000>;
+			};
+			kernel@100000 {
+				label = "kernel";
+				reg = <0x100000 0x400000>;
+			};
+			rootfs@500000 {
+				label = "rootfs";
+				reg = <0x500000 0x7b00000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&pioC 10 0>;
+			linux,default-trigger = "none";
+		};
+
+		green {
+			gpios = <&pioA 5 1>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		yellow {
+			gpios = <&pioB 20 1>;
+			linux,default-trigger = "none";
+		};
+
+		blue {
+			gpios = <&pioB 21 1>;
+			linux,default-trigger = "none";
+		};
+	};
+};

trunk/arch/arm/boot/dts/am335x-bone.dts

@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+};

trunk/arch/arm/boot/dts/am335x-evm.dts

@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+	model = "TI AM335x EVM";
+	compatible = "ti,am335x-evm", "ti,am33xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+};