Merge tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/broonie/regulator into next

Pull regulator updates from Mark Brown:
 "The bulk of the changes for this release are a few new drivers however
  there are a couple of noticable core changes and the usual stream of
  cleanups and fixes:

   - move disable of unused regulators later in init so it comes after
     deferred probe has iterated making startup smoother.
   - fixes to reference counting of the DT nodes for constraints from
     Charles Keepax.  This has little practical impact since all real
     users of the regulator bindings use FDT which doesn't need the
     reference counting.
   - lots of cleanups, especially to the Samsung drivers.
   - support for Linear Technologies LTC3589, Texas Instruments
     TPS658640 and X-Powers AXP20x"

* tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (64 commits)
  regulator: pbias: remove unnecessary OOM messages
  regulator: max8649: remove unnecessary OOM messages
  regulator: core: Fix the init of DT defined fixed regulators
  regulator: core: Disable unused regulators after deferred probing is done
  regulator: Don't disable unused regulators we don't have permission for
  regulator: axp20x: Use regulator_map_voltage_ascend for LDO4
  regulator: use of_property_read_{bool|u32}()
  regulator: Fix regulator_get_{optional,exclusive}() documentation
  regulators: Add definition of regulator_set_voltage_time() for !CONFIG_REGULATOR
  regulator: arizona-ldo1: add missing #include
  regulator: pfuze100: Support enable/disable for fixed regulator
  regulator: ltc3589: Remove ltc3589_list_voltage_fixed function
  regulator: ltc3589: Fix module dependency
  regulator: tps6586x: Remove unused to_tps6586x_dev() function
  regulator: tps65218: Convert to use regulator_set_voltage_time_sel
  regulator: tps6586x: Add support for the TPS658640
  regulator: tps6586x: Prepare supporting fixed regulators
  regulator: pfuze100: Don't allocate an invalid gpio
  regulator: pfuze100: Support SWB enable/disable
  regulator: fixed: use of_property_read_{bool|u32}()
  ...

Documentation/devicetree/bindings/mfd/bcm590xx.txt

@@ -19,7 +19,9 @@ Optional child nodes:
   The valid regulator node names for BCM59056 are:
   	rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
 	mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
-	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr
+	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
+	gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
+	vbus
 
 Example:
 	pmu: bcm59056@8 {

Documentation/devicetree/bindings/mfd/s2mps11.txt

@@ -56,6 +56,20 @@ for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
 Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6],
 BUCK[3, 4], and BUCK[7, 8, 10]
 
+On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control
+over GPIO. To turn this feature on this property must be added to the regulator
+sub-node:
+	- samsung,ext-control-gpios: GPIO specifier for one GPIO
+		controlling this regulator (enable/disable);
+Example:
+	LDO12 {
+		regulator-name = "V_EMMC_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		samsung,ext-control-gpios = <&gpk0 2 0>;
+	};
+
+
 The regulator constraints inside the regulator nodes use the standard regulator
 bindings which are documented elsewhere.
 

Documentation/devicetree/bindings/regulator/ltc3589.txt

@@ -0,0 +1,99 @@
+Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators
+
+Required properties:
+- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2"
+- reg: I2C slave address
+
+Required child node:
+- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out,
+  ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
+  documented in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators. The
+nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify
+the resistor values of their external feedback voltage dividers:
+
+Required properties (not on ldo3, ldo4):
+- lltc,fb-voltage-divider: An array of two integers containing the resistor
+  values R1 and R2 of the feedback voltage divider in ohms.
+
+Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from
+0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between
+0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1
+have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3
+regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4
+regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V
+and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not
+be disabled and thus should have the regulator-always-on property set.
+
+Example:
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-1";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};

Documentation/devicetree/bindings/regulator/tps65090.txt

@@ -21,6 +21,10 @@ Optional properties:
   number should be provided. If it is externally controlled and no GPIO
   entry then driver will just configure this rails as external control
   and will not provide any enable/disable APIs.
+- ti,overcurrent-wait: This is applicable to FET registers, which have a
+  poorly defined "overcurrent wait" field.  If this property is present it
+  should be between 0 - 3.  If this property isn't present we won't touch the
+  "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with.
 
 Each regulator is defined using the standard binding for regulators.
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -74,6 +74,7 @@ lantiq	Lantiq Semiconductor
 lg	LG Corporation
 linux	Linux-specific binding
 lsi	LSI Corp. (LSI Logic)
+lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
 microchip	Microchip Technology Inc.

drivers/mfd/arizona-core.c

@@ -508,19 +508,31 @@ int arizona_of_get_type(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(arizona_of_get_type);
 
+int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop,
+			      bool mandatory)
+{
+	int gpio;
+
+	gpio = of_get_named_gpio(arizona->dev->of_node, prop, 0);
+	if (gpio < 0) {
+		if (mandatory)
+			dev_err(arizona->dev,
+				"Mandatory DT gpio %s missing/malformed: %d\n",
+				prop, gpio);
+
+		gpio = 0;
+	}
+
+	return gpio;
+}
+EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
+
 static int arizona_of_get_core_pdata(struct arizona *arizona)
 {
+	struct arizona_pdata *pdata = &arizona->pdata;
 	int ret, i;
 
-	arizona->pdata.reset = of_get_named_gpio(arizona->dev->of_node,
-						 "wlf,reset", 0);
-	if (arizona->pdata.reset < 0)
-		arizona->pdata.reset = 0;
-
-	arizona->pdata.ldoena = of_get_named_gpio(arizona->dev->of_node,
-						  "wlf,ldoena", 0);
-	if (arizona->pdata.ldoena < 0)
-		arizona->pdata.ldoena = 0;
+	pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);
 
 	ret = of_property_read_u32_array(arizona->dev->of_node,
 					 "wlf,gpio-defaults",
@@ -652,6 +664,9 @@ int arizona_dev_init(struct arizona *arizona)
 		return -EINVAL;
 	}
 
+	/* Mark DCVDD as external, LDO1 driver will clear if internal */
+	arizona->external_dcvdd = true;
+
 	ret = mfd_add_devices(arizona->dev, -1, early_devs,
 			      ARRAY_SIZE(early_devs), NULL, 0, NULL);
 	if (ret != 0) {
@@ -851,14 +866,6 @@ int arizona_dev_init(struct arizona *arizona)
 			     arizona->pdata.gpio_defaults[i]);
 	}
 
-	/*
-	 * LDO1 can only be used to supply DCVDD so if it has no
-	 * consumers then DCVDD is supplied externally.
-	 */
-	if (arizona->pdata.ldo1 &&
-	    arizona->pdata.ldo1->num_consumer_supplies == 0)
-		arizona->external_dcvdd = true;
-
 	pm_runtime_set_autosuspend_delay(arizona->dev, 100);
 	pm_runtime_use_autosuspend(arizona->dev);
 	pm_runtime_enable(arizona->dev);

drivers/mfd/bcm590xx.c

@@ -28,39 +28,71 @@ static const struct mfd_cell bcm590xx_devs[] = {
 	},
 };
 
-static const struct regmap_config bcm590xx_regmap_config = {
+static const struct regmap_config bcm590xx_regmap_config_pri = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
-	.max_register	= BCM590XX_MAX_REGISTER,
+	.max_register	= BCM590XX_MAX_REGISTER_PRI,
 	.cache_type	= REGCACHE_RBTREE,
 };
 
-static int bcm590xx_i2c_probe(struct i2c_client *i2c,
+static const struct regmap_config bcm590xx_regmap_config_sec = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= BCM590XX_MAX_REGISTER_SEC,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
 			      const struct i2c_device_id *id)
 {
 	struct bcm590xx *bcm590xx;
 	int ret;
 
-	bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL);
+	bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL);
 	if (!bcm590xx)
 		return -ENOMEM;
 
-	i2c_set_clientdata(i2c, bcm590xx);
-	bcm590xx->dev = &i2c->dev;
-	bcm590xx->i2c_client = i2c;
+	i2c_set_clientdata(i2c_pri, bcm590xx);
+	bcm590xx->dev = &i2c_pri->dev;
+	bcm590xx->i2c_pri = i2c_pri;
 
-	bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config);
-	if (IS_ERR(bcm590xx->regmap)) {
-		ret = PTR_ERR(bcm590xx->regmap);
-		dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+	bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
+						 &bcm590xx_regmap_config_pri);
+	if (IS_ERR(bcm590xx->regmap_pri)) {
+		ret = PTR_ERR(bcm590xx->regmap_pri);
+		dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret);
 		return ret;
 	}
 
-	ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs,
+	/* Secondary I2C slave address is the base address with A(2) asserted */
+	bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter,
+					  i2c_pri->addr | BIT(2));
+	if (IS_ERR_OR_NULL(bcm590xx->i2c_sec)) {
+		dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
+		return -ENODEV;
+	}
+	i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
+
+	bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec,
+						&bcm590xx_regmap_config_sec);
+	if (IS_ERR(bcm590xx->regmap_sec)) {
+		ret = PTR_ERR(bcm590xx->regmap_sec);
+		dev_err(&bcm590xx->i2c_sec->dev,
+			"secondary regmap init failed: %d\n", ret);
+		goto err;
+	}
+
+	ret = mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs,
 			      ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
-	if (ret < 0)
-		dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
+	if (ret < 0) {
+		dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
 
+err:
+	i2c_unregister_device(bcm590xx->i2c_sec);
 	return ret;
 }
 

drivers/mfd/tps65090.c

@@ -32,14 +32,6 @@
 #define NUM_INT_REG 2
 #define TOTAL_NUM_REG 0x18
 
-/* interrupt status registers */
-#define TPS65090_INT_STS	0x0
-#define TPS65090_INT_STS2	0x1
-
-/* interrupt mask registers */
-#define TPS65090_INT_MSK	0x2
-#define TPS65090_INT_MSK2	0x3
-
 #define TPS65090_INT1_MASK_VAC_STATUS_CHANGE		1
 #define TPS65090_INT1_MASK_VSYS_STATUS_CHANGE		2
 #define TPS65090_INT1_MASK_BAT_STATUS_CHANGE		3
@@ -64,11 +56,16 @@ static struct resource charger_resources[] = {
 	}
 };
 
-static const struct mfd_cell tps65090s[] = {
-	{
+enum tps65090_cells {
+	PMIC = 0,
+	CHARGER = 1,
+};
+
+static struct mfd_cell tps65090s[] = {
+	[PMIC] = {
 		.name = "tps65090-pmic",
 	},
-	{
+	[CHARGER] = {
 		.name = "tps65090-charger",
 		.num_resources = ARRAY_SIZE(charger_resources),
 		.resources = &charger_resources[0],
@@ -139,17 +136,26 @@ static struct regmap_irq_chip tps65090_irq_chip = {
 	.irqs = tps65090_irqs,
 	.num_irqs = ARRAY_SIZE(tps65090_irqs),
 	.num_regs = NUM_INT_REG,
-	.status_base = TPS65090_INT_STS,
-	.mask_base = TPS65090_INT_MSK,
+	.status_base = TPS65090_REG_INTR_STS,
+	.mask_base = TPS65090_REG_INTR_MASK,
 	.mask_invert = true,
 };
 
 static bool is_volatile_reg(struct device *dev, unsigned int reg)
 {
-	if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS2))
-		return true;
-	else
+	/* Nearly all registers have status bits mixed in, except a few */
+	switch (reg) {
+	case TPS65090_REG_INTR_MASK:
+	case TPS65090_REG_INTR_MASK2:
+	case TPS65090_REG_CG_CTRL0:
+	case TPS65090_REG_CG_CTRL1:
+	case TPS65090_REG_CG_CTRL2:
+	case TPS65090_REG_CG_CTRL3:
+	case TPS65090_REG_CG_CTRL4:
+	case TPS65090_REG_CG_CTRL5:
 		return false;
+	}
+	return true;
 }
 
 static const struct regmap_config tps65090_regmap_config = {
@@ -211,6 +217,9 @@ static int tps65090_i2c_probe(struct i2c_client *client,
 					"IRQ init failed with err: %d\n", ret);
 			return ret;
 		}
+	} else {
+		/* Don't tell children they have an IRQ that'll never fire */
+		tps65090s[CHARGER].num_resources = 0;
 	}
 
 	ret = mfd_add_devices(tps65090->dev, -1, tps65090s,

drivers/mfd/tps6586x.c

@@ -495,6 +495,10 @@ static void tps6586x_print_version(struct i2c_client *client, int version)
 	case TPS658623:
 		name = "TPS658623";
 		break;
+	case TPS658640:
+	case TPS658640v2:
+		name = "TPS658640";
+		break;
 	case TPS658643:
 		name = "TPS658643";
 		break;