merge Linus head tree into my drm tree and fix up conflicts

.gitignore

@@ -0,0 +1,30 @@
+#
+# NOTE! Don't add files that are generated in specific
+# subdirectories here. Add them in the ".gitignore" file
+# in that subdirectory instead.
+#
+# Normal rules
+#
+.*
+*.o
+*.a
+*.s
+*.ko
+*.mod.c
+
+#
+# Top-level generic files
+#
+vmlinux*
+System.map
+Module.symvers
+
+#
+# Generated include files
+#
+include/asm
+include/config
+include/linux/autoconf.h
+include/linux/compile.h
+include/linux/version.h
+

Documentation/Changes

@@ -237,6 +237,12 @@ udev
 udev is a userspace application for populating /dev dynamically with
 only entries for devices actually present. udev replaces devfs.
 
+FUSE
+----
+
+Needs libfuse 2.4.0 or later.  Absolute minimum is 2.3.0 but mount
+options 'direct_io' and 'kernel_cache' won't work.
+
 Networking
 ==========
 
@@ -390,6 +396,10 @@ udev
 ----
 o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
 
+FUSE
+----
+o <http://sourceforge.net/projects/fuse>
+
 Networking
 **********
 

Documentation/SubmittingPatches

@@ -301,15 +301,99 @@ now, but you can do this to mark internal company procedures or just
 point out some special detail about the sign-off. 
 
 
+12) The canonical patch format
 
-12) More references for submitting patches
+The canonical patch subject line is:
+
+    Subject: [PATCH 001/123] subsystem: summary phrase
+
+The canonical patch message body contains the following:
+
+  - A "from" line specifying the patch author.
+
+  - An empty line.
+
+  - The body of the explanation, which will be copied to the
+    permanent changelog to describe this patch.
+
+  - The "Signed-off-by:" lines, described above, which will
+    also go in the changelog.
+
+  - A marker line containing simply "---".
+
+  - Any additional comments not suitable for the changelog.
+
+  - The actual patch (diff output).
+
+The Subject line format makes it very easy to sort the emails
+alphabetically by subject line - pretty much any email reader will
+support that - since because the sequence number is zero-padded,
+the numerical and alphabetic sort is the same.
+
+The "subsystem" in the email's Subject should identify which
+area or subsystem of the kernel is being patched.
+
+The "summary phrase" in the email's Subject should concisely
+describe the patch which that email contains.  The "summary
+phrase" should not be a filename.  Do not use the same "summary
+phrase" for every patch in a whole patch series.
+
+Bear in mind that the "summary phrase" of your email becomes
+a globally-unique identifier for that patch.  It propagates
+all the way into the git changelog.  The "summary phrase" may
+later be used in developer discussions which refer to the patch.
+People will want to google for the "summary phrase" to read
+discussion regarding that patch.
+
+A couple of example Subjects:
+
+    Subject: [patch 2/5] ext2: improve scalability of bitmap searching
+    Subject: [PATCHv2 001/207] x86: fix eflags tracking
+
+The "from" line must be the very first line in the message body,
+and has the form:
+
+        From: Original Author <author@example.com>
+
+The "from" line specifies who will be credited as the author of the
+patch in the permanent changelog.  If the "from" line is missing,
+then the "From:" line from the email header will be used to determine
+the patch author in the changelog.
+
+The explanation body will be committed to the permanent source
+changelog, so should make sense to a competent reader who has long
+since forgotten the immediate details of the discussion that might
+have led to this patch.
+
+The "---" marker line serves the essential purpose of marking for patch
+handling tools where the changelog message ends.
+
+One good use for the additional comments after the "---" marker is for
+a diffstat, to show what files have changed, and the number of inserted
+and deleted lines per file.  A diffstat is especially useful on bigger
+patches.  Other comments relevant only to the moment or the maintainer,
+not suitable for the permanent changelog, should also go here.
+
+See more details on the proper patch format in the following
+references.
+
+
+13) More references for submitting patches
 
 Andrew Morton, "The perfect patch" (tpp).
   <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
 
 Jeff Garzik, "Linux kernel patch submission format."
   <http://linux.yyz.us/patch-format.html>
 
+Greg KH, "How to piss off a kernel subsystem maintainer"
+  <http://www.kroah.com/log/2005/03/31/>
+
+Kernel Documentation/CodingStyle
+  <http://sosdg.org/~coywolf/lxr/source/Documentation/CodingStyle>
+
+Linus Torvald's mail on the canonical patch format:
+  <http://lkml.org/lkml/2005/4/7/183>
 
 
 -----------------------------------

Documentation/connector/connector.txt

@@ -131,3 +131,47 @@ Netlink itself is not reliable protocol, that means that messages can
 be lost due to memory pressure or process' receiving queue overflowed,
 so caller is warned must be prepared. That is why struct cn_msg [main
 connector's message header] contains u32 seq and u32 ack fields.
+
+/*****************************************/
+Userspace usage.
+/*****************************************/
+2.6.14 has a new netlink socket implementation, which by default does not
+allow to send data to netlink groups other than 1.
+So, if to use netlink socket (for example using connector) 
+with different group number userspace application must subscribe to 
+that group. It can be achieved by following pseudocode:
+
+s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+
+l_local.nl_family = AF_NETLINK;
+l_local.nl_groups = 12345;
+l_local.nl_pid = 0;
+
+if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
+	perror("bind");
+	close(s);
+	return -1;
+}
+
+{
+	int on = l_local.nl_groups;
+	setsockopt(s, 270, 1, &on, sizeof(on));
+}
+
+Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
+option. To drop multicast subscription one should call above socket option
+with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
+
+2.6.14 netlink code only allows to select a group which is less or equal to
+the maximum group number, which is used at netlink_kernel_create() time.
+In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use
+group number 12345, you must increment CN_NETLINK_USERS to that number.
+Additional 0xf numbers are allocated to be used by non-in-kernel users.
+
+Due to this limitation, group 0xffffffff does not work now, so one can
+not use add/remove connector's group notifications, but as far as I know, 
+only cn_test.c test module used it.
+
+Some work in netlink area is still being done, so things can be changed in
+2.6.15 timeframe, if it will happen, documentation will be updated for that
+kernel.

Documentation/dell_rbu.txt

@@ -35,6 +35,7 @@ The driver load creates the following directories under the /sys file system.
 /sys/class/firmware/dell_rbu/data
 /sys/devices/platform/dell_rbu/image_type
 /sys/devices/platform/dell_rbu/data
+/sys/devices/platform/dell_rbu/packet_size
 
 The driver supports two types of update mechanism; monolithic and packetized.
 These update mechanism depends upon the BIOS currently running on the system.
@@ -47,8 +48,26 @@ By default the driver uses monolithic memory for the update type. This can be
 changed to packets during the driver load time by specifying the load
 parameter image_type=packet.  This can also be changed later as below
 echo packet > /sys/devices/platform/dell_rbu/image_type
-Also echoing either mono ,packet or init in to image_type will free up the
-memory allocated by the driver.
+
+In packet update mode the packet size has to be given before any packets can
+be downloaded. It is done as below
+echo XXXX > /sys/devices/platform/dell_rbu/packet_size
+In the packet update mechanism, the user neesd to create a new file having
+packets of data arranged back to back. It can be done as follows
+The user creates packets header, gets the chunk of the BIOS image and
+placs it next to the packetheader; now, the packetheader + BIOS image chunk
+added to geather should match the specified packet_size. This makes one
+packet, the user needs to create more such packets out of the entire BIOS
+image file and then arrange all these packets back to back in to one single
+file.
+This file is then copied to /sys/class/firmware/dell_rbu/data.
+Once this file gets to the driver, the driver extracts packet_size data from
+the file and spreads it accross the physical memory in contiguous packet_sized
+space.
+This method makes sure that all the packets get to the driver in a single operation.
+
+In monolithic update the user simply get the BIOS image (.hdr file) and copies
+to the data file as is without any change to the BIOS image itself.
 
 Do the steps below to download the BIOS image.
 1) echo 1 > /sys/class/firmware/dell_rbu/loading
@@ -58,23 +77,22 @@ Do the steps below to download the BIOS image.
 The /sys/class/firmware/dell_rbu/ entries will remain till the following is
 done.
 echo -1 > /sys/class/firmware/dell_rbu/loading.
-Until this step is completed the drivr cannot be unloaded.
+Until this step is completed the driver cannot be unloaded.
+Also echoing either mono ,packet or init in to image_type will free up the
+memory allocated by the driver.
+
 If an user by accident executes steps 1 and 3 above without executing step 2;
 it will make the /sys/class/firmware/dell_rbu/ entries to disappear.
 The entries can be recreated by doing the following
 echo init > /sys/devices/platform/dell_rbu/image_type
 NOTE: echoing init in image_type does not change it original value.
 
 Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
-read back the image downloaded. This is useful in case of packet update
-mechanism where the above steps 1,2,3 will repeated for every packet.
-By reading the /sys/devices/platform/dell_rbu/data file all packet data
-downloaded can be verified in a single file.
-The packets are arranged in this file one after the other in a FIFO order.
+read back the image downloaded.
 
 NOTE:
-This driver requires a patch for firmware_class.c which has the addition
-of request_firmware_nowait_nohotplug function to wortk
+This driver requires a patch for firmware_class.c which has the modified
+request_firmware_nowait function.
 Also after updating the BIOS image an user mdoe application neeeds to execute
 code which message the BIOS update request to the BIOS. So on the next reboot
 the BIOS knows about the new image downloaded and it updates it self.