Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This is a large set of updates, mostly for drivers (qla2xxx [including
  support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa,
  be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas).

  There's also a rework for tape adding virtually unlimited numbers of
  tape drives plus a set of dif fixes for sd and a fix for a live lock
  on hot remove of SCSI devices.

  This round includes a signed tag pull of isci-for-3.6

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI
helper function use in a function that was removed by this pull.

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits)
  [SCSI] st: remove st_mutex
  [SCSI] sd: Ensure we correctly disable devices with unknown protection type
  [SCSI] hpsa: gen8plus Smart Array IDs
  [SCSI] qla4xxx: Update driver version to 5.03.00-k1
  [SCSI] qla4xxx: Disable generating pause frames for ISP83XX
  [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX
  [SCSI] qla4xxx: IDC implementation for Loopback
  [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx
  [SCSI] qla4xxx: Fix panic while rmmod
  [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails
  [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX
  [SCSI] qla4xxx: Update idc reg in case of PCI AER
  [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery
  [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX
  [SCSI] qla4xxx: Print correct IDC version
  [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW
  [SCSI] scsi_dh_alua: Enable STPG for unavailable ports
  [SCSI] scsi_remove_target: fix softlockup regression on hot remove
  [SCSI] ibmvscsi: Fix host config length field overflow
  [SCSI] ibmvscsi: Remove backend abstraction
  ...

Documentation/kernel-parameters.txt

@@ -1350,6 +1350,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			* nohrst, nosrst, norst: suppress hard, soft
                           and both resets.
 
+			* rstonce: only attempt one reset during
+			  hot-unplug link recovery
+
 			* dump_id: dump IDENTIFY data.
 
 			If there are multiple matching configurations changing

Documentation/scsi/ChangeLog.megaraid_sas

@@ -1,3 +1,13 @@
+Release Date    : Tue. Jun 17, 2012 17:00:00 PST 2012 -
+			(emaild-id:megaraidlinux@lsi.com)
+			Adam Radford/Kashyap Desai
+Current Version : 00.00.06.18-rc1
+Old Version     : 00.00.06.15-rc1
+    1. Fix Copyright dates.
+    2. Add throttlequeuedepth module parameter.
+    3. Add resetwaittime module parameter.
+    4. Move poll_aen_lock initializer.
+-------------------------------------------------------------------------------
 Release Date    : Mon. Mar 19, 2012 17:00:00 PST 2012 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Adam Radford

Documentation/scsi/LICENSE.qla2xxx

@@ -1,4 +1,4 @@
-Copyright (c) 2003-2011 QLogic Corporation
+Copyright (c) 2003-2012 QLogic Corporation
 QLogic Linux FC-FCoE Driver
 
 This program includes a device driver for Linux 3.x.

Documentation/scsi/LICENSE.qla4xxx

@@ -1,4 +1,4 @@
-Copyright (c) 2003-2011 QLogic Corporation
+Copyright (c) 2003-2012 QLogic Corporation
 QLogic Linux iSCSI Driver
 
 This program includes a device driver for Linux 3.x.

Documentation/scsi/st.txt

@@ -112,10 +112,8 @@ attempted).
 
 MINOR NUMBERS
 
-The tape driver currently supports 128 drives by default. This number
-can be increased by editing st.h and recompiling the driver if
-necessary. The upper limit is 2^17 drives if 4 modes for each drive
-are used.
+The tape driver currently supports up to 2^17 drives if 4 modes for
+each drive are used.
 
 The minor numbers consist of the following bit fields:
 

MAINTAINERS

@@ -1650,7 +1650,6 @@ F:	drivers/bcma/
 F:	include/linux/bcma/
 
 BROCADE BFA FC SCSI DRIVER
-M:	Jing Huang <huangj@brocade.com>
 M:	Krishna C Gudipati <kgudipat@brocade.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
@@ -3438,6 +3437,13 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/ibm/ibmveth.*
 
+IBM Power Virtual SCSI/FC Device Drivers
+M:	Robert Jennings <rcj@linux.vnet.ibm.com>
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	drivers/scsi/ibmvscsi/
+X:	drivers/scsi/ibmvscsi/ibmvstgt.c
+
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer
 M:	Dave Jeffery <ipslinux@adaptec.com>

drivers/ata/libata-core.c

@@ -5273,16 +5273,20 @@ bool ata_link_offline(struct ata_link *link)
 #ifdef CONFIG_PM
 static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 			       unsigned int action, unsigned int ehi_flags,
-			       int wait)
+			       int *async)
 {
 	struct ata_link *link;
 	unsigned long flags;
-	int rc;
+	int rc = 0;
 
 	/* Previous resume operation might still be in
 	 * progress.  Wait for PM_PENDING to clear.
 	 */
 	if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+		if (async) {
+			*async = -EAGAIN;
+			return 0;
+		}
 		ata_port_wait_eh(ap);
 		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
 	}
@@ -5291,10 +5295,10 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 	spin_lock_irqsave(ap->lock, flags);
 
 	ap->pm_mesg = mesg;
-	if (wait) {
-		rc = 0;
+	if (async)
+		ap->pm_result = async;
+	else
 		ap->pm_result = &rc;
-	}
 
 	ap->pflags |= ATA_PFLAG_PM_PENDING;
 	ata_for_each_link(link, ap, HOST_FIRST) {
@@ -5307,17 +5311,16 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	/* wait and check result */
-	if (wait) {
+	if (!async) {
 		ata_port_wait_eh(ap);
 		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
 	}
 
 	return rc;
 }
 
-static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
+static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int *async)
 {
-	struct ata_port *ap = to_ata_port(dev);
 	unsigned int ehi_flags = ATA_EHI_QUIET;
 	int rc;
 
@@ -5332,10 +5335,17 @@ static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
 	if (mesg.event == PM_EVENT_SUSPEND)
 		ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
 
-	rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, 1);
+	rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, async);
 	return rc;
 }
 
+static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
+{
+	struct ata_port *ap = to_ata_port(dev);
+
+	return __ata_port_suspend_common(ap, mesg, NULL);
+}
+
 static int ata_port_suspend(struct device *dev)
 {
 	if (pm_runtime_suspended(dev))
@@ -5360,16 +5370,22 @@ static int ata_port_poweroff(struct device *dev)
 	return ata_port_suspend_common(dev, PMSG_HIBERNATE);
 }
 
-static int ata_port_resume_common(struct device *dev)
+static int __ata_port_resume_common(struct ata_port *ap, int *async)
 {
-	struct ata_port *ap = to_ata_port(dev);
 	int rc;
 
 	rc = ata_port_request_pm(ap, PMSG_ON, ATA_EH_RESET,
-		ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 1);
+		ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, async);
 	return rc;
 }
 
+static int ata_port_resume_common(struct device *dev)
+{
+	struct ata_port *ap = to_ata_port(dev);
+
+	return __ata_port_resume_common(ap, NULL);
+}
+
 static int ata_port_resume(struct device *dev)
 {
 	int rc;
@@ -5402,6 +5418,24 @@ static const struct dev_pm_ops ata_port_pm_ops = {
 	.runtime_idle = ata_port_runtime_idle,
 };
 
+/* sas ports don't participate in pm runtime management of ata_ports,
+ * and need to resume ata devices at the domain level, not the per-port
+ * level. sas suspend/resume is async to allow parallel port recovery
+ * since sas has multiple ata_port instances per Scsi_Host.
+ */
+int ata_sas_port_async_suspend(struct ata_port *ap, int *async)
+{
+	return __ata_port_suspend_common(ap, PMSG_SUSPEND, async);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_async_suspend);
+
+int ata_sas_port_async_resume(struct ata_port *ap, int *async)
+{
+	return __ata_port_resume_common(ap, async);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_async_resume);
+
+
 /**
  *	ata_host_suspend - suspend host
  *	@host: host to suspend
@@ -5947,24 +5981,18 @@ int ata_host_start(struct ata_host *host)
 }
 
 /**
- *	ata_sas_host_init - Initialize a host struct
+ *	ata_sas_host_init - Initialize a host struct for sas (ipr, libsas)
  *	@host:	host to initialize
  *	@dev:	device host is attached to
- *	@flags:	host flags
  *	@ops:	port_ops
  *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
- *
  */
-/* KILLME - the only user left is ipr */
 void ata_host_init(struct ata_host *host, struct device *dev,
-		   unsigned long flags, struct ata_port_operations *ops)
+		   struct ata_port_operations *ops)
 {
 	spin_lock_init(&host->lock);
 	mutex_init(&host->eh_mutex);
 	host->dev = dev;
-	host->flags = flags;
 	host->ops = ops;
 }
 
@@ -6408,6 +6436,7 @@ static int __init ata_parse_force_one(char **cur,
 		{ "nohrst",	.lflags		= ATA_LFLAG_NO_HRST },
 		{ "nosrst",	.lflags		= ATA_LFLAG_NO_SRST },
 		{ "norst",	.lflags		= ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
+		{ "rstonce",	.lflags		= ATA_LFLAG_RST_ONCE },
 	};
 	char *start = *cur, *p = *cur;
 	char *id, *val, *endp;

drivers/ata/libata-eh.c

@@ -2625,6 +2625,8 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	 */
 	while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
 		max_tries++;
+	if (link->flags & ATA_LFLAG_RST_ONCE)
+		max_tries = 1;
 	if (link->flags & ATA_LFLAG_NO_HRST)
 		hardreset = NULL;
 	if (link->flags & ATA_LFLAG_NO_SRST)

drivers/message/fusion/mptbase.c

@@ -1666,7 +1666,7 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 	if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
 		printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
 		    "MEM failed\n", ioc->name);
-		return r;
+		goto out_pci_disable_device;
 	}
 
 	if (sizeof(dma_addr_t) > 4) {
@@ -1690,8 +1690,7 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 		} else {
 			printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
 			    ioc->name, pci_name(pdev));
-			pci_release_selected_regions(pdev, ioc->bars);
-			return r;
+			goto out_pci_release_region;
 		}
 	} else {
 		if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
@@ -1704,8 +1703,7 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 		} else {
 			printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
 			    ioc->name, pci_name(pdev));
-			pci_release_selected_regions(pdev, ioc->bars);
-			return r;
+			goto out_pci_release_region;
 		}
 	}
 
@@ -1735,8 +1733,8 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 	if (mem == NULL) {
 		printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
 			" memory!\n", ioc->name);
-		pci_release_selected_regions(pdev, ioc->bars);
-		return -EINVAL;
+		r = -EINVAL;
+		goto out_pci_release_region;
 	}
 	ioc->memmap = mem;
 	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
@@ -1750,6 +1748,12 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 	ioc->pio_chip = (SYSIF_REGS __iomem *)port;
 
 	return 0;
+
+out_pci_release_region:
+	pci_release_selected_regions(pdev, ioc->bars);
+out_pci_disable_device:
+	pci_disable_device(pdev);
+	return r;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

drivers/s390/scsi/zfcp_aux.c

@@ -519,6 +519,7 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn,
 
 	rwlock_init(&port->unit_list_lock);
 	INIT_LIST_HEAD(&port->unit_list);
+	atomic_set(&port->units, 0);
 
 	INIT_WORK(&port->gid_pn_work, zfcp_fc_port_did_lookup);
 	INIT_WORK(&port->test_link_work, zfcp_fc_link_test_work);