---

yaml
---
r: 365135
b: refs/heads/master
c: 5f19a85
h: refs/heads/master
i:
  365133: 5928257
  365131: bae560a
  365127: 3d6cf65
  365119: dbb181f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: eb8ad609912cd468b23467892a1c80ff2d610716
+refs/heads/master: 5f19a85ba728de8a1eca8b8ae239cc27f9449985

trunk/CREDITS

@@ -1510,6 +1510,14 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project

trunk/Documentation/DocBook/device-drivers.tmpl

@@ -227,7 +227,7 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250/8250.c
+!Edrivers/tty/serial/8250/8250_core.c
   </chapter>
 
   <chapter id="fbdev">

trunk/Documentation/devicetree/bindings/mfd/mc13xxx.txt

@@ -10,10 +10,40 @@ Optional properties:
 - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
 
 Sub-nodes:
-- regulators : Contain the regulator nodes.  The MC13892 regulators are
-  bound using their names as listed below with their registers and bits
-  for enabling.
+- regulators : Contain the regulator nodes. The regulators are bound using
+  their names as listed below with their registers and bits for enabling.
 
+MC13783 regulators:
+    sw1a      : regulator SW1A      (register 24, bit 0)
+    sw1b      : regulator SW1B      (register 25, bit 0)
+    sw2a      : regulator SW2A      (register 26, bit 0)
+    sw2b      : regulator SW2B      (register 27, bit 0)
+    sw3       : regulator SW3       (register 29, bit 20)
+    vaudio    : regulator VAUDIO    (register 32, bit 0)
+    viohi     : regulator VIOHI     (register 32, bit 3)
+    violo     : regulator VIOLO     (register 32, bit 6)
+    vdig      : regulator VDIG      (register 32, bit 9)
+    vgen      : regulator VGEN      (register 32, bit 12)
+    vrfdig    : regulator VRFDIG    (register 32, bit 15)
+    vrfref    : regulator VRFREF    (register 32, bit 18)
+    vrfcp     : regulator VRFCP     (register 32, bit 21)
+    vsim      : regulator VSIM      (register 33, bit 0)
+    vesim     : regulator VESIM     (register 33, bit 3)
+    vcam      : regulator VCAM      (register 33, bit 6)
+    vrfbg     : regulator VRFBG     (register 33, bit 9)
+    vvib      : regulator VVIB      (register 33, bit 11)
+    vrf1      : regulator VRF1      (register 33, bit 12)
+    vrf2      : regulator VRF2      (register 33, bit 15)
+    vmmc1     : regulator VMMC1     (register 33, bit 18)
+    vmmc2     : regulator VMMC2     (register 33, bit 21)
+    gpo1      : regulator GPO1      (register 34, bit 6)
+    gpo2      : regulator GPO2      (register 34, bit 8)
+    gpo3      : regulator GPO3      (register 34, bit 10)
+    gpo4      : regulator GPO4      (register 34, bit 12)
+    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
+    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
+
+MC13892 regulators:
     vcoincell : regulator VCOINCELL (register 13, bit 23)
     sw1       : regulator SW1	    (register 24, bit 0)
     sw2       : regulator SW2	    (register 25, bit 0)

trunk/Documentation/hwmon/lm75

@@ -23,7 +23,7 @@ Supported chips:
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/
   * Microchip (TelCom) TCN75
-    Prefix: 'lm75'
+    Prefix: 'tcn75'
     Addresses scanned: none
     Datasheet: Publicly available at the Microchip website
                http://www.microchip.com/

trunk/Documentation/i2c/busses/i2c-diolan-u2c

@@ -5,7 +5,7 @@ Supported adapters:
     Documentation:
 	http://www.diolan.com/i2c/u2c12.html
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 Description
 -----------

trunk/Documentation/kernel-parameters.txt

@@ -596,16 +596,33 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			is selected automatically. Check
 			Documentation/kdump/kdump.txt for further details.
 
-	crashkernel_low=size[KMG]
-			[KNL, x86] parts under 4G.
-
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for an example.
 
+	crashkernel=size[KMG],high
+			[KNL, x86_64] range could be above 4G. Allow kernel
+			to allocate physical memory region from top, so could
+			be above 4G if system have more than 4G ram installed.
+			Otherwise memory region will be allocated below 4G, if
+			available.
+			It will be ignored if crashkernel=X is specified.
+	crashkernel=size[KMG],low
+			[KNL, x86_64] range under 4G. When crashkernel=X,high
+			is passed, kernel could allocate physical memory region
+			above 4G, that cause second kernel crash on system
+			that require some amount of low memory, e.g. swiotlb
+			requires at least 64M+32K low memory.  Kernel would
+			try to allocate 72M below 4G automatically.
+			This one let user to specify own low range under 4G
+			for second kernel instead.
+			0: to disable low allocation.
+			It will be ignored when crashkernel=X,high is not used
+			or memory reserved is below 4G.
+
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -788,6 +805,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	edd=		[EDD]
 			Format: {"off" | "on" | "skip[mbr]"}
 
+	efi_no_storage_paranoia [EFI; X86]
+			Using this parameter you can use more than 50% of
+			your efi variable storage. Use this parameter only if
+			you are really sure that your UEFI does sane gc and
+			fulfills the spec otherwise your board may brick.
+
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
 

trunk/Documentation/networking/ipvs-sysctl.txt

@@ -15,6 +15,13 @@ amemthresh - INTEGER
         enabled and the variable is automatically set to 2, otherwise
         the strategy is disabled and the variable is  set  to 1.
 
+backup_only - BOOLEAN
+	0 - disabled (default)
+	not 0 - enabled
+
+	If set, disable the director function while the server is
+	in backup mode to avoid packet loops for DR/TUN methods.
+
 conntrack - BOOLEAN
 	0 - disabled (default)
 	not 0 - enabled

trunk/Documentation/scsi/LICENSE.qla2xxx

@@ -1,4 +1,4 @@
-Copyright (c) 2003-2012 QLogic Corporation
+Copyright (c) 2003-2013 QLogic Corporation
 QLogic Linux FC-FCoE Driver
 
 This program includes a device driver for Linux 3.x.

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
     power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
-    power_save_controller - Support runtime D3 of HD-audio controller
-		(-1 = on for supported chip (default), false = off,
-		 true = force to on even for unsupported hardware)
+    power_save_controller - Reset HD-audio controller in power-saving mode
+		(default = on)
     align_buffer_size - Force rounding of buffer/period sizes to multiples
     		      of 128 bytes. This is more efficient in terms of memory
 		      access but isn't required by the HDA spec and prevents
@@ -912,7 +911,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     models depending on the codec chip.  The list of available models
     is found in HD-Audio-Models.txt
 
-    The model name "genric" is treated as a special case.  When this
+    The model name "generic" is treated as a special case.  When this
     model is given, the driver uses the generic codec parser without
     "codec-patch".  It's sometimes good for testing and debugging.
 

trunk/Documentation/sound/alsa/seq_oss.html

@@ -285,7 +285,7 @@ <H4>
 <H4>
 7.2.4 Close Callback</H4>
 The <TT>close</TT> callback is called when this device is closed by the
-applicaion. If any private data was allocated in open callback, it must
+application. If any private data was allocated in open callback, it must
 be released in the close callback. The deletion of ALSA port should be
 done here, too. This callback must not be NULL.
 <H4>