[ARM] 3141/1: OMAP 1/5: Update omap1 specific files

Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Omap1 serial pport and framebuffer init updates by Imre Deak - Add support for omap310 processor and Palm Tungsten E PDA by Laurent Gonzales, Romain Goyet, et al. Omap310 and omap1510 processors are now handled as omap15xx. - Omap1 specific changes to shared omap clock framework by Tony Lindgren - Omap1 specific changes to shared omap pin mux framework by Tony Lindgren - Other misc fixes, such as update memory timings for smc91x, omap1 specific device initialization etc. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
git-mirror · Nov 10, 2005 · 3179a01 · 3179a01
1 parent a7918f3
commit 3179a01
Show file tree

Hide file tree

Showing 23 changed files with 2,157 additions and 316 deletions.
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
@@ -6,10 +6,10 @@ config ARCH_OMAP730
 	bool "OMAP730 Based System"
 	select ARCH_OMAP_OTG
 
-config ARCH_OMAP1510
+config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
-	bool "OMAP1510 Based System"
+	bool "OMAP15xx Based System"
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
@@ -21,7 +21,7 @@ comment "OMAP Board Type"
 
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
@@ -64,20 +64,30 @@ config MACH_OMAP_PERSEUS2
 
 config MACH_VOICEBLUE
 	bool "Voiceblue"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
 	  such a board.
 
 config MACH_NETSTAR
 	bool "NetStar"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for NetStar PBX. Say Y here if you have such a board.
 
+config MACH_OMAP_PALMTE
+	bool "Palm Tungsten E"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+          Support for the Palm Tungsten E PDA. Currently only the LCD panel
+          is supported. To boot the kernel, you'll need a PalmOS compatible
+          bootloader; check out http://palmtelinux.sourceforge.net for more
+          informations.
+          Say Y here if you have such a PDA, say NO otherwise.
+
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
           Support for generic OMAP-1510, 1610 or 1710 board with
           no FPGA. Can be used as template for porting Linux to
@@ -121,32 +131,32 @@ config OMAP_ARM_182MHZ
 
 config OMAP_ARM_168MHZ
 	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 168MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_150MHZ
 	bool "OMAP ARM 150 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Enable 150MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_120MHZ
 	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
         default y
 	help
           Enable 60MHz clock for OMAP CPU. If unsure, say Y.
 
 config OMAP_ARM_30MHZ
 	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o irq.o time.o serial.o devices.o
+obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o
 led-y := leds.o
 
 # Specific board support
@@ -15,8 +15,9 @@ obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_NETSTAR)		+= board-netstar.o
+obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 
-ifeq ($(CONFIG_ARCH_OMAP1510),y)
+ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
 endif

diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
@@ -15,7 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -28,16 +28,14 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 
-static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static void __init omap_generic_init_irq(void)
 {
 	omap_init_irq();
 }
 
 /* assume no Mini-AB port */
 
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config generic1510_usb_config __initdata = {
 	.register_host	= 1,
 	.register_dev	= 1,
@@ -76,21 +74,19 @@ static struct omap_mmc_config generic_mmc_config __initdata = {
 
 #endif
 
+static struct omap_uart_config generic_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
 static struct omap_board_config_kernel generic_config[] = {
 	{ OMAP_TAG_USB,           NULL },
 	{ OMAP_TAG_MMC,           &generic_mmc_config },
+	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
 {
-	const struct omap_uart_config *uart_conf;
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
-	 */
-#ifdef CONFIG_ARCH_OMAP1510
+#ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		generic_config[0].data = &generic1510_usb_config;
 	}
@@ -101,20 +97,9 @@ static void __init omap_generic_init(void)
 	}
 #endif
 
-	uart_conf = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (uart_conf != NULL) {
-		unsigned int enabled_ports, i;
-
-		enabled_ports = uart_conf->enabled_uarts;
-		for (i = 0; i < 3; i++) {
-			if (!(enabled_ports & (1 << i)))
-				generic_serial_ports[i] = 0;
-		}
-	}
-
 	omap_board_config = generic_config;
 	omap_board_config_size = ARRAY_SIZE(generic_config);
-	omap_serial_init(generic_serial_ports);
+	omap_serial_init();
 }
 
 static void __init omap_generic_map_io(void)

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
@@ -40,8 +40,6 @@
 
 extern int omap_gpio_init(void);
 
-static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h2_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -160,9 +158,20 @@ static struct omap_mmc_config h2_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config h2_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h2_lcd_config __initdata = {
+	.panel_name	= "h2",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel h2_config[] = {
 	{ OMAP_TAG_USB,           &h2_usb_config },
 	{ OMAP_TAG_MMC,           &h2_mmc_config },
+	{ OMAP_TAG_UART,	&h2_uart_config },
+	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
 static void __init h2_init(void)
@@ -180,12 +189,12 @@ static void __init h2_init(void)
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
 	omap_board_config_size = ARRAY_SIZE(h2_config);
+	omap_serial_init();
 }
 
 static void __init h2_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(h2_serial_ports);
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")

diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
@@ -41,8 +41,6 @@
 
 extern int omap_gpio_init(void);
 
-static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
-
 static struct mtd_partition h3_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -168,9 +166,20 @@ static struct omap_mmc_config h3_mmc_config __initdata = {
 	},
 };
 
+static struct omap_uart_config h3_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config h3_lcd_config __initdata = {
+	.panel_name	= "h3",
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel h3_config[] = {
-	{ OMAP_TAG_USB,	 &h3_usb_config },
-	{ OMAP_TAG_MMC,  &h3_mmc_config },
+	{ OMAP_TAG_USB,		&h3_usb_config },
+	{ OMAP_TAG_MMC,		&h3_mmc_config },
+	{ OMAP_TAG_UART,	&h3_uart_config },
+	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
 static void __init h3_init(void)
@@ -180,6 +189,7 @@ static void __init h3_init(void)
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 	omap_board_config = h3_config;
 	omap_board_config_size = ARRAY_SIZE(h3_config);
+	omap_serial_init();
 }
 
 static void __init h3_init_smc91x(void)
@@ -201,7 +211,6 @@ void h3_init_irq(void)
 static void __init h3_map_io(void)
 {
 	omap_map_common_io();
-	omap_serial_init(h3_serial_ports);
 }
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")