Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-…

…linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Workaround for a sparse warning in include/asm-mips/mach-tx4927/ioremap.h
  [MIPS] Make show_code static and add __user tag
  [MIPS] Workaround for a sparse warning in include/asm-mips/compat.h
  [MIPS] Add some __user tags
  [MIPS] math-emu minor cleanup
  [MIPS] Kill CONFIG_TX4927BUG_WORKAROUND
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_FB_XPERT98
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1000_SRC_CLK
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1000_USE32K
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1XXX_PSC_SPI
  [CHAR] Delete leftovers of old Alchemy UART driver

arch/mips/au1000/common/setup.c

@@ -103,12 +103,6 @@ void __init plat_mem_setup(void)
     }
 #endif
 
-#ifdef CONFIG_FB_XPERT98
-	if ((argptr = strstr(argptr, "video=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " video=atyfb:1024x768-8@70");
-	}
-#endif
 
 #if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
 	/* au1000 does not support vra, au1500 and au1100 do */

arch/mips/au1000/common/time.c

@@ -203,11 +203,7 @@ wakeup_counter0_set(int ticks)
 /* I haven't found anyone that doesn't use a 12 MHz source clock,
  * but just in case.....
  */
-#ifdef CONFIG_AU1000_SRC_CLK
-#define AU1000_SRC_CLK	CONFIG_AU1000_SRC_CLK
-#else
 #define AU1000_SRC_CLK	12000000
-#endif
 
 /*
  * We read the real processor speed from the PLL.  This is important
@@ -247,33 +243,8 @@ unsigned long cal_r4koff(void)
 		au_writel (0, SYS_TOYWRITE);
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
 
-#if defined(CONFIG_AU1000_USE32K)
-		{
-			unsigned long start, end, count;
-
-			start = au_readl(SYS_RTCREAD);
-			start += 2;
-			/* wait for the beginning of a new tick
-			*/
-			while (au_readl(SYS_RTCREAD) < start);
-
-			/* Start r4k counter.
-			*/
-			write_c0_count(0);
-
-			/* Wait 0.5 seconds.
-			*/
-			end = start + (32768 / trim_divide)/2;
-
-			while (end > au_readl(SYS_RTCREAD));
-
-			count = read_c0_count();
-			cpu_speed = count * 2;
-		}
-#else
 		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
 			AU1000_SRC_CLK;
-#endif
 	}
 	else {
 		/* The 32KHz oscillator isn't running, so assume there

arch/mips/au1000/pb1200/board_setup.c

@@ -131,14 +131,7 @@ void __init board_setup(void)
 	/* The Pb1200 development board uses external MUX for PSC0 to
 	support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
 	*/
-#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
-	#error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
-			Refer to Pb1200/Db1200 documentation.
-#elif defined( CONFIG_AU1XXX_PSC_SPI )
-	bcsr->resets |= BCSR_RESETS_PCS0MUX;
-	/*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/
-	  bcsr->resets =0x900f;
-#elif defined( CONFIG_I2C_AU1550 )
+#ifdef CONFIG_I2C_AU1550
 	bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
 #endif
 	au_sync();

arch/mips/kernel/branch.c

@@ -22,7 +22,8 @@
  */
 int __compute_return_epc(struct pt_regs *regs)
 {
-	unsigned int *addr, bit, fcr31, dspcontrol;
+	unsigned int __user *addr;
+	unsigned int bit, fcr31, dspcontrol;
 	long epc;
 	union mips_instruction insn;
 
@@ -33,7 +34,7 @@ int __compute_return_epc(struct pt_regs *regs)
 	/*
 	 * Read the instruction
 	 */
-	addr = (unsigned int *) epc;
+	addr = (unsigned int __user *) epc;
 	if (__get_user(insn.word, addr)) {
 		force_sig(SIGSEGV, current);
 		return -EFAULT;

arch/mips/kernel/traps.c

@@ -131,7 +131,7 @@ static void show_stacktrace(struct task_struct *task, struct pt_regs *regs)
 	const int field = 2 * sizeof(unsigned long);
 	long stackdata;
 	int i;
-	unsigned long *sp = (unsigned long *)regs->regs[29];
+	unsigned long __user *sp = (unsigned long __user *)regs->regs[29];
 
 	printk("Stack :");
 	i = 0;
@@ -187,7 +187,7 @@ void dump_stack(void)
 
 EXPORT_SYMBOL(dump_stack);
 
-void show_code(unsigned int *pc)
+static void show_code(unsigned int __user *pc)
 {
 	long i;
 
@@ -305,7 +305,7 @@ void show_registers(struct pt_regs *regs)
 	printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n",
 	        current->comm, current->pid, current_thread_info(), current);
 	show_stacktrace(current, regs);
-	show_code((unsigned int *) regs->cp0_epc);
+	show_code((unsigned int __user *) regs->cp0_epc);
 	printk("\n");
 }
 
@@ -865,7 +865,7 @@ asmlinkage void do_mcheck(struct pt_regs *regs)
 		dump_tlb_all();
 	}
 
-	show_code((unsigned int *) regs->cp0_epc);
+	show_code((unsigned int __user *) regs->cp0_epc);
 
 	/*
 	 * Some chips may have other causes of machine check (e.g. SB1

arch/mips/math-emu/cp1emu.c

@@ -205,7 +205,7 @@ static int isBranchInstr(mips_instruction * i)
 static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 {
 	mips_instruction ir;
-	void * emulpc, *contpc;
+	unsigned long emulpc, contpc;
 	unsigned int cond;
 
 	if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
@@ -230,7 +230,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 		 * Linux MIPS branch emulator operates on context, updating the
 		 * cp0_epc.
 		 */
-		emulpc = (void *) (xcp->cp0_epc + 4);	/* Snapshot emulation target */
+		emulpc = xcp->cp0_epc + 4;	/* Snapshot emulation target */
 
 		if (__compute_return_epc(xcp)) {
 #ifdef CP1DBG
@@ -244,12 +244,12 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 			return SIGBUS;
 		}
 		/* __compute_return_epc() will have updated cp0_epc */
-		contpc = (void *)  xcp->cp0_epc;
+		contpc = xcp->cp0_epc;
 		/* In order not to confuse ptrace() et al, tweak context */
-		xcp->cp0_epc = (unsigned long) emulpc - 4;
+		xcp->cp0_epc = emulpc - 4;
 	} else {
-		emulpc = (void *)  xcp->cp0_epc;
-		contpc = (void *) (xcp->cp0_epc + 4);
+		emulpc = xcp->cp0_epc;
+		contpc = xcp->cp0_epc + 4;
 	}
 
       emul:
@@ -427,8 +427,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 				 * instruction
 				 */
 				xcp->cp0_epc += 4;
-				contpc = (void *)
-					(xcp->cp0_epc +
+				contpc = (xcp->cp0_epc +
 					(MIPSInst_SIMM(ir) << 2));
 
 				if (get_user(ir,
@@ -462,7 +461,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 				 * Single step the non-cp1
 				 * instruction in the dslot
 				 */
-				return mips_dsemul(xcp, ir, (unsigned long) contpc);
+				return mips_dsemul(xcp, ir, contpc);
 			}
 			else {
 				/* branch not taken */
@@ -521,7 +520,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 	}
 
 	/* we did it !! */
-	xcp->cp0_epc = (unsigned long) contpc;
+	xcp->cp0_epc = contpc;
 	xcp->cp0_cause &= ~CAUSEF_BD;
 
 	return 0;

arch/mips/math-emu/dsemul.c

@@ -54,8 +54,7 @@ struct emuframe {
 int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 {
 	extern asmlinkage void handle_dsemulret(void);
-	mips_instruction *dsemul_insns;
-	struct emuframe *fr;
+	struct emuframe __user *fr;
 	int err;
 
 	if (ir == 0) {		/* a nop is easy */
@@ -87,8 +86,8 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 	 */
 
 	/* Ensure that the two instructions are in the same cache line */
-	dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
-	fr = (struct emuframe *) dsemul_insns;
+	fr = (struct emuframe __user *)
+		((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
 
 	/* Verify that the stack pointer is not competely insane */
 	if (unlikely(!access_ok(VERIFY_WRITE, fr, sizeof(struct emuframe))))
@@ -113,12 +112,13 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 
 int do_dsemulret(struct pt_regs *xcp)
 {
-	struct emuframe *fr;
+	struct emuframe __user *fr;
 	unsigned long epc;
 	u32 insn, cookie;
 	int err = 0;
 
-	fr = (struct emuframe *) (xcp->cp0_epc - sizeof(mips_instruction));
+	fr = (struct emuframe __user *)
+		(xcp->cp0_epc - sizeof(mips_instruction));
 
 	/*
 	 * If we can't even access the area, something is very wrong, but we'll

arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c

@@ -138,7 +138,6 @@ extern void toshiba_rbtx4927_irq_setup(void);
 char *prom_getcmdline(void);
 
 #ifdef CONFIG_PCI
-#define CONFIG_TX4927BUG_WORKAROUND
 #undef TX4927_SUPPORT_COMMAND_IO
 #undef  TX4927_SUPPORT_PCI_66
 int tx4927_cpu_clock = 100000000;	/* 100MHz */
@@ -669,15 +668,7 @@ void tx4927_pci_setup(void)
 
 	/* PCI->GB mappings (MEM 16MB) -not used */
 	tx4927_pcicptr->p2gm1plbase = 0xffffffff;
-#ifdef CONFIG_TX4927BUG_WORKAROUND
-	/*
-	 * TX4927-PCIC-BUG: P2GM1PUBASE must be 0
-	 * if P2GM0PUBASE was 0.
-	 */
-	tx4927_pcicptr->p2gm1pubase = 0;
-#else
 	tx4927_pcicptr->p2gm1pubase = 0xffffffff;
-#endif
 	tx4927_pcicptr->p2gmgbase[1] = 0;
 
 	/* PCI->GB mappings (MEM 1MB) -not used */
@@ -910,16 +901,6 @@ void __init toshiba_rbtx4927_setup(void)
 	if (tx4927_ccfg_toeon)
 		tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE;
 
-	/* SDRAMC fixup */
-#ifdef CONFIG_TX4927BUG_WORKAROUND
-	/*
-	 * TX4927-BUG: INF 01-01-18/ BUG 01-01-22
-	 * G-bus timeout error detection is incorrect
-	 */
-	if (tx4927_ccfg_toeon)
-		tx4927_sdramcptr->tr |= 0x02000000;	/* RCD:3tck */
-#endif
-
 	tx4927_pci_setup();
 	if (tx4927_using_backplane == 1)
 		printk("backplane board IS installed\n");

drivers/char/Kconfig

@@ -374,20 +374,6 @@ config ISTALLION
 	  To compile this driver as a module, choose M here: the
 	  module will be called istallion.
 
-config AU1000_UART
-	bool "Enable Au1000 UART Support"
-	depends on SERIAL_NONSTANDARD && MIPS
-	help
-	  If you have an Alchemy AU1000 processor (MIPS based) and you want
-	  to use serial ports, say Y.  Otherwise, say N.
-
-config AU1000_SERIAL_CONSOLE
-	bool "Enable Au1000 serial console"
-	depends on AU1000_UART
-	help
-	  If you have an Alchemy AU1000 processor (MIPS based) and you want
-	  to use a console on a serial port, say Y.  Otherwise, say N.
-
 config SERIAL_DEC
 	bool "DECstation serial support"
 	depends on MACH_DECSTATION

include/asm-mips/compat.h

@@ -132,7 +132,8 @@ typedef u32		compat_uptr_t;
 
 static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
-	return (void __user *)(long)uptr;
+	/* cast to a __user pointer via "unsigned long" makes sparse happy */
+	return (void __user *)(unsigned long)(long)uptr;
 }
 
 static inline compat_uptr_t ptr_to_compat(void __user *uptr)

include/asm-mips/mach-tx49xx/ioremap.h

@@ -36,7 +36,8 @@ static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
 
 static inline int plat_iounmap(const volatile void __iomem *addr)
 {
-	return (unsigned long)addr >= (unsigned long)(int)TXX9_DIRECTMAP_BASE;
+	return (unsigned long)addr >=
+		(unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff);
 }
 
 #endif /* __ASM_MACH_TX49XX_IOREMAP_H */