---

yaml
---
r: 141318
b: refs/heads/master
c: 14c0b3e
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0564200d3d6e21882581eb72f560c850c6c7d8b2
+refs/heads/master: 14c0b3ed4cab5ea79de091e22d42d6677f7cfefa

trunk/drivers/staging/Kconfig

@@ -97,5 +97,7 @@ source "drivers/staging/dst/Kconfig"
 
 source "drivers/staging/pohmelfs/Kconfig"
 
+source "drivers/staging/stlc45xx/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING

trunk/drivers/staging/Makefile

@@ -31,3 +31,4 @@ obj-$(CONFIG_EPL)		+= epl/
 obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_DST)		+= dst/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/
+obj-$(CONFIG_STLC45XX)		+= stlc45xx/

trunk/drivers/staging/stlc45xx/Kconfig

@@ -0,0 +1,8 @@
+config STLC45XX
+	tristate "stlc4550/4560 support"
+	depends on MAC80211 && WLAN_80211 && SPI_MASTER
+	---help---
+	  This is a driver for stlc4550 and stlc4560 chipsets.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called stlc45xx.  If unsure, say N.

trunk/drivers/staging/stlc45xx/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_STLC45XX)	+= stlc45xx.o

trunk/drivers/staging/stlc45xx/stlc45xx.h

@@ -0,0 +1,283 @@
+/*
+ * This file is part of stlc45xx
+ *
+ * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <net/mac80211.h>
+
+#include "stlc45xx_lmac.h"
+
+#define DRIVER_NAME "stlc45xx"
+#define DRIVER_VERSION "0.1.3"
+
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+	DEBUG_NONE = 0,
+	DEBUG_FUNC = 1 << 0,
+	DEBUG_IRQ = 1 << 1,
+	DEBUG_BH = 1 << 2,
+	DEBUG_RX = 1 << 3,
+	DEBUG_RX_CONTENT = 1 << 5,
+	DEBUG_TX = 1 << 6,
+	DEBUG_TX_CONTENT = 1 << 8,
+	DEBUG_TXBUFFER = 1 << 9,
+	DEBUG_QUEUE = 1 << 10,
+	DEBUG_BOOT = 1 << 11,
+	DEBUG_PSM = 1 << 12,
+	DEBUG_ALL = ~0,
+};
+
+#define DEBUG_LEVEL DEBUG_NONE
+/* #define DEBUG_LEVEL DEBUG_ALL */
+/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_RX | DEBUG_IRQ) */
+/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_MEMREGION | DEBUG_QUEUE) */
+/* #define DEBUG_LEVEL (DEBUG_MEMREGION | DEBUG_QUEUE) */
+
+#define stlc45xx_error(fmt, arg...) \
+	printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define stlc45xx_warning(fmt, arg...) \
+	printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define stlc45xx_info(fmt, arg...) \
+	printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+
+#define stlc45xx_debug(level, fmt, arg...) \
+	do { \
+		if (level & DEBUG_LEVEL) \
+			printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+	} while (0)
+
+#define stlc45xx_dump(level, buf, len)		\
+	do { \
+		if (level & DEBUG_LEVEL) \
+			print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \
+				       16, 1, buf, len, 1);		\
+	} while (0)
+
+#define MAC2STR(a) ((a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5])
+#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
+
+/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */
+#define ADDR_READ_BIT_15  0x8000
+
+#define SPI_ADRS_ARM_INTERRUPTS     0x00
+#define SPI_ADRS_ARM_INT_EN	    0x04
+
+#define SPI_ADRS_HOST_INTERRUPTS    0x08
+#define SPI_ADRS_HOST_INT_EN	    0x0c
+#define SPI_ADRS_HOST_INT_ACK	    0x10
+
+#define SPI_ADRS_GEN_PURP_1   	    0x14
+#define SPI_ADRS_GEN_PURP_2   	    0x18
+
+/* high word */
+#define SPI_ADRS_DEV_CTRL_STAT      0x26
+
+#define SPI_ADRS_DMA_DATA      	    0x28
+
+#define SPI_ADRS_DMA_WRITE_CTRL     0x2c
+#define SPI_ADRS_DMA_WRITE_LEN      0x2e
+#define SPI_ADRS_DMA_WRITE_BASE     0x30
+
+#define SPI_ADRS_DMA_READ_CTRL      0x34
+#define SPI_ADRS_DMA_READ_LEN       0x36
+#define SPI_ADRS_DMA_READ_BASE      0x38
+
+#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000
+#define SPI_CTRL_STAT_START_HALTED  0x4000
+#define SPI_CTRL_STAT_RAM_BOOT      0x2000
+#define SPI_CTRL_STAT_HOST_RESET    0x1000
+#define SPI_CTRL_STAT_HOST_CPU_EN   0x0800
+
+#define SPI_DMA_WRITE_CTRL_ENABLE   0x0001
+#define SPI_DMA_READ_CTRL_ENABLE    0x0001
+#define HOST_ALLOWED                (1 << 7)
+
+#define FIRMWARE_ADDRESS                        0x20000
+
+#define SPI_TIMEOUT                             100         /* msec */
+
+#define SPI_MAX_TX_PACKETS                      32
+
+#define SPI_MAX_PACKET_SIZE                     32767
+
+#define SPI_TARGET_INT_WAKEUP                   0x00000001
+#define SPI_TARGET_INT_SLEEP                    0x00000002
+#define SPI_TARGET_INT_RDDONE                   0x00000004
+
+#define SPI_TARGET_INT_CTS                      0x00004000
+#define SPI_TARGET_INT_DR                       0x00008000
+
+#define SPI_HOST_INT_READY                      0x00000001
+#define SPI_HOST_INT_WR_READY                   0x00000002
+#define SPI_HOST_INT_SW_UPDATE                  0x00000004
+#define SPI_HOST_INT_UPDATE                     0x10000000
+
+/* clear to send */
+#define SPI_HOST_INT_CTS	                0x00004000
+
+/* data ready */
+#define SPI_HOST_INT_DR	                        0x00008000
+
+#define SPI_HOST_INTS_DEFAULT \
+	(SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)
+
+#define TARGET_BOOT_SLEEP 50
+
+/* The firmware buffer is divided into three areas:
+ *
+ * o config area (for control commands)
+ * o tx buffer
+ * o rx buffer
+ */
+#define FIRMWARE_BUFFER_START 0x20200
+#define FIRMWARE_BUFFER_END 0x27c60
+#define FIRMWARE_BUFFER_LEN (FIRMWARE_BUFFER_END - FIRMWARE_BUFFER_START)
+#define FIRMWARE_MTU 3240
+#define FIRMWARE_CONFIG_PAYLOAD_LEN 1024
+#define FIRMWARE_CONFIG_START FIRMWARE_BUFFER_START
+#define FIRMWARE_CONFIG_LEN (sizeof(struct s_lm_control) + \
+			     FIRMWARE_CONFIG_PAYLOAD_LEN)
+#define FIRMWARE_CONFIG_END (FIRMWARE_CONFIG_START + FIRMWARE_CONFIG_LEN - 1)
+#define FIRMWARE_RXBUFFER_LEN (5 * FIRMWARE_MTU + 1024)
+#define FIRMWARE_RXBUFFER_START (FIRMWARE_BUFFER_END - FIRMWARE_RXBUFFER_LEN)
+#define FIRMWARE_RXBUFFER_END (FIRMWARE_RXBUFFER_START + \
+			       FIRMWARE_RXBUFFER_LEN - 1)
+#define FIRMWARE_TXBUFFER_START (FIRMWARE_BUFFER_START + FIRMWARE_CONFIG_LEN)
+#define FIRMWARE_TXBUFFER_LEN (FIRMWARE_BUFFER_LEN - FIRMWARE_CONFIG_LEN - \
+			       FIRMWARE_RXBUFFER_LEN)
+#define FIRMWARE_TXBUFFER_END (FIRMWARE_TXBUFFER_START + \
+			       FIRMWARE_TXBUFFER_LEN - 1)
+
+#define FIRMWARE_TXBUFFER_HEADER 100
+#define FIRMWARE_TXBUFFER_TRAILER 4
+
+/* FIXME: come up with a proper value */
+#define MAX_FRAME_LEN 2500
+
+/* unit is ms */
+#define TX_FRAME_LIFETIME 2000
+#define TX_TIMEOUT 4000
+
+#define SUPPORTED_CHANNELS 13
+
+/* FIXME */
+/* #define CHANNEL_CAL_LEN offsetof(struct s_lmo_scan, bratemask) - \ */
+/* 	offsetof(struct s_lmo_scan, channel) */
+#define CHANNEL_CAL_LEN 292
+#define CHANNEL_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * CHANNEL_CAL_LEN)
+/* FIXME */
+/* #define RSSI_CAL_LEN sizeof(struct s_lmo_scan) - \ */
+/* 	offsetof(struct s_lmo_scan, rssical) */
+#define RSSI_CAL_LEN 8
+#define RSSI_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * RSSI_CAL_LEN)
+
+struct s_dma_regs {
+	unsigned short cmd;
+	unsigned short len;
+	unsigned long addr;
+};
+
+struct stlc45xx_ie_tim {
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bmap_control;
+	u8 pvbmap[251];
+};
+
+struct txbuffer {
+	/* can be removed when switched to skb queue */
+	struct list_head tx_list;
+
+	struct list_head buffer_list;
+
+	int start;
+	int frame_start;
+	int end;
+
+	struct sk_buff *skb;
+	u32 handle;
+
+	bool status_needed;
+
+	int header_len;
+
+	/* unit jiffies */
+	unsigned long lifetime;
+};
+
+enum fw_state {
+	FW_STATE_OFF,
+	FW_STATE_BOOTING,
+	FW_STATE_READY,
+	FW_STATE_RESET,
+	FW_STATE_RESETTING,
+};
+
+struct stlc45xx {
+	struct ieee80211_hw *hw;
+	struct spi_device *spi;
+	struct work_struct work;
+	struct work_struct work_reset;
+	struct delayed_work work_tx_timeout;
+	struct mutex mutex;
+	struct completion fw_comp;
+
+
+	u8 bssid[ETH_ALEN];
+	u8 mac_addr[ETH_ALEN];
+	int channel;
+
+	u8 *cal_rssi;
+	u8 *cal_channels;
+
+	enum fw_state fw_state;
+
+	spinlock_t tx_lock;
+
+	/* protected by tx_lock */
+	struct list_head txbuffer;
+
+	/* protected by tx_lock */
+	struct list_head tx_pending;
+
+	/* protected by tx_lock */
+	int tx_queue_stopped;
+
+	/* protected by mutex */
+	struct list_head tx_sent;
+
+	int tx_frames;
+
+	u8 *fw;
+	int fw_len;
+
+	bool psm;
+	bool associated;
+	int aid;
+	bool pspolling;
+};
+
+