Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux…

…-2.6.git

Documentation/acpi-hotkey.txt

@@ -33,3 +33,6 @@ The result of the execution of this aml method is
 attached to /proc/acpi/hotkey/poll_method, which is dnyamically
 created.  Please use command "cat /proc/acpi/hotkey/polling_method" 
 to retrieve it.
+
+Note: Use cmdline "acpi_generic_hotkey" to over-ride
+loading any platform specific drivers.

Documentation/arm/Samsung-S3C24XX/USB-Host.txt

@@ -0,0 +1,93 @@
+			S3C24XX USB Host support
+			========================
+
+
+
+Introduction
+------------
+
+  This document details the S3C2410/S3C2440 in-built OHCI USB host support.
+
+Configuration
+-------------
+
+  Enable at least the following kernel options:
+
+  menuconfig:
+
+   Device Drivers  --->
+     USB support  --->
+       <*> Support for Host-side USB
+       <*>   OHCI HCD support
+
+
+  .config:
+    CONFIG_USB
+    CONFIG_USB_OHCI_HCD
+
+
+  Once these options are configured, the standard set of USB device
+  drivers can be configured and used.
+
+
+Board Support
+-------------
+
+  The driver attaches to a platform device, which will need to be
+  added by the board specific support file in linux/arch/arm/mach-s3c2410,
+  such as mach-bast.c or mach-smdk2410.c
+
+  The platform device's platform_data field is only needed if the
+  board implements extra power control or over-current monitoring.
+
+  The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
+  register, so if both ports are to be used for the host, then it is
+  the board support file's responsibility to ensure that the second
+  port is configured to be connected to the OHCI core.
+
+
+Platform Data
+-------------
+
+  See linux/include/asm-arm/arch-s3c2410/usb-control.h for the
+  descriptions of the platform device data. An implementation
+  can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
+
+  The `struct s3c2410_hcd_info` contains a pair of functions
+  that get called to enable over-current detection, and to
+  control the port power status.
+
+  The ports are numbered 0 and 1.
+
+  power_control:
+
+    Called to enable or disable the power on the port.
+
+  enable_oc:
+
+    Called to enable or disable the over-current monitoring.
+    This should claim or release the resources being used to
+    check the power condition on the port, such as an IRQ.
+
+  report_oc:
+
+    The OHCI driver fills this field in for the over-current code
+    to call when there is a change to the over-current state on
+    an port. The ports argument is a bitmask of 1 bit per port,
+    with bit X being 1 for an over-current on port X.
+
+    The function s3c2410_usb_report_oc() has been provided to
+    ensure this is called correctly.
+
+  port[x]:
+
+    This is struct describes each port, 0 or 1. The platform driver
+    should set the flags field of each port to S3C_HCDFLG_USED if
+    the port is enabled.
+
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2005 Simtec Electronics

Documentation/kernel-parameters.txt

@@ -159,6 +159,11 @@ running once the system is up.
 
 	acpi_fake_ecdt	[HW,ACPI] Workaround failure due to BIOS lacking ECDT
 
+	acpi_generic_hotkey [HW,ACPI]
+			Allow consolidated generic hotkey driver to
+			over-ride platform specific driver.
+			See also Documentation/acpi-hotkey.txt.
+
 	ad1816=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
 			See also Documentation/sound/oss/AD1816.

Documentation/pci.txt

@@ -266,20 +266,6 @@ port an old driver to the new PCI interface.  They are no longer present
 in the kernel as they aren't compatible with hotplug or PCI domains or
 having sane locking.
 
-pcibios_present() and		Since ages, you don't need to test presence
-pci_present()			of PCI subsystem when trying to talk to it.
-				If it's not there, the list of PCI devices
-				is empty and all functions for searching for
-				devices just return NULL.
-pcibios_(read|write)_*		Superseded by their pci_(read|write)_*
-				counterparts.
-pcibios_find_*			Superseded by their pci_get_* counterparts.
-pci_for_each_dev()		Superseded by pci_get_device()
-pci_for_each_dev_reverse()	Superseded by pci_find_device_reverse()
-pci_for_each_bus()		Superseded by pci_find_next_bus()
 pci_find_device()		Superseded by pci_get_device()
 pci_find_subsys()		Superseded by pci_get_subsys()
 pci_find_slot()			Superseded by pci_get_slot()
-pcibios_find_class()		Superseded by pci_get_class()
-pci_find_class()		Superseded by pci_get_class()
-pci_(read|write)_*_nodev()	Superseded by pci_bus_(read|write)_*()

MAINTAINERS

@@ -787,7 +787,7 @@ DVB SUBSYSTEM AND DRIVERS
 P:	LinuxTV.org Project
 M: 	linux-dvb-maintainer@linuxtv.org
 L: 	linux-dvb@linuxtv.org (subscription required)
-W:	http://linuxtv.org/developer/dvb.xml
+W:	http://linuxtv.org/
 S:	Supported
 
 EATA-DMA SCSI DRIVER
@@ -1828,6 +1828,12 @@ P:	Greg Kroah-Hartman
 M:	greg@kroah.com
 S:	Maintained
 
+PCIE HOTPLUG DRIVER
+P:	Kristen Carlson Accardi
+M:	kristen.c.accardi@intel.com
+L:	pcihpd-discuss@lists.sourceforge.net
+S:	Maintained
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	http://lists.infradead.org/mailman/listinfo/linux-pcmcia
@@ -2204,6 +2210,12 @@ W:	http://projects.buici.com/arm
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
 
+SHPC HOTPLUG DRIVER
+P:	Kristen Carlson Accardi
+M:	kristen.c.accardi@intel.com
+L:	pcihpd-discuss@lists.sourceforge.net
+S:	Maintained
+
 SPARC (sparc32):
 P:	William L. Irwin
 M:	wli@holomorphy.com

arch/arm/kernel/entry-armv.S

@@ -533,6 +533,13 @@ ENTRY(__switch_to)
 	ldr	r3, [r2, #TI_TP_VALUE]
 	stmia	ip!, {r4 - sl, fp, sp, lr}	@ Store most regs on stack
 	ldr	r6, [r2, #TI_CPU_DOMAIN]!
+#if __LINUX_ARM_ARCH__ >= 6
+#ifdef CONFIG_CPU_MPCORE
+	clrex
+#else
+	strex	r3, r4, [ip]			@ Clear exclusive monitor
+#endif
+#endif
 #if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
 	mra	r4, r5, acc0
 	stmia   ip, {r4, r5}

arch/arm/lib/bitops.h

@@ -1,4 +1,6 @@
-#if __LINUX_ARM_ARCH__ >= 6
+#include <linux/config.h>
+
+#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE)
 	.macro	bitop, instr
 	mov	r2, #1
 	and	r3, r0, #7		@ Get bit offset

arch/arm/mach-s3c2410/usb-simtec.c

@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2004,2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -14,6 +14,8 @@
  * Modifications:
  *	14-Sep-2004 BJD  Created
  *	18-Oct-2004 BJD  Cleanups, and added code to report OC cleared
+ *	09-Aug-2005 BJD  Renamed s3c2410_report_oc to s3c2410_usb_report_oc
+ *	09-Aug-2005 BJD  Ports powered only if both are enabled
 */
 
 #define DEBUG
@@ -47,13 +49,19 @@
  * designed boards.
 */
 
+static unsigned int power_state[2];
+
 static void
 usb_simtec_powercontrol(int port, int to)
 {
 	pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
 
-	if (port == 1)
-		s3c2410_gpio_setpin(S3C2410_GPB4, to ? 0:1);
+	power_state[port] = to;
+
+	if (power_state[0] && power_state[1])
+		s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+	else
+		s3c2410_gpio_setpin(S3C2410_GPB4, 1);
 }
 
 static irqreturn_t
@@ -63,10 +71,10 @@ usb_simtec_ocirq(int irq, void *pw, struct pt_regs *regs)
 
 	if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
-		s3c2410_report_oc(info, 3);
+		s3c2410_usb_report_oc(info, 3);
 	} else {
 		pr_debug("usb_simtec: over-current irq (oc cleared)\n");
-		s3c2410_report_oc(info, 0);
+		s3c2410_usb_report_oc(info, 0);
 	}
 
 	return IRQ_HANDLED;

arch/arm/mm/mm-armv.c

@@ -383,6 +383,7 @@ static void __init build_mem_type_table(void)
 {
 	struct cachepolicy *cp;
 	unsigned int cr = get_cr();
+	unsigned int user_pgprot;
 	int cpu_arch = cpu_architecture();
 	int i;
 
@@ -408,6 +409,9 @@ static void __init build_mem_type_table(void)
 		}
 	}
 
+	cp = &cache_policies[cachepolicy];
+	user_pgprot = cp->pte;
+
 	/*
 	 * ARMv6 and above have extended page tables.
 	 */
@@ -426,11 +430,18 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 
+		/*
+		 * Mark the device area as "shared device"
+		 */
 		mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
 		mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
-	}
 
-	cp = &cache_policies[cachepolicy];
+		/*
+		 * User pages need to be mapped with the ASID
+		 * (iow, non-global)
+		 */
+		user_pgprot |= L_PTE_ASID;
+	}
 
 	if (cpu_arch >= CPU_ARCH_ARMv5) {
 		mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE;
@@ -448,7 +459,7 @@ static void __init build_mem_type_table(void)
 
 	for (i = 0; i < 16; i++) {
 		unsigned long v = pgprot_val(protection_map[i]);
-		v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | cp->pte;
+		v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
 		protection_map[i] = __pgprot(v);
 	}
 

arch/arm/mm/proc-v6.S

@@ -111,12 +111,6 @@ ENTRY(cpu_v6_switch_mm)
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
 	mov	pc, lr
 
-#define nG	(1 << 11)
-#define APX	(1 << 9)
-#define AP1	(1 << 5)
-#define AP0	(1 << 4)
-#define XN	(1 << 0)
-
 /*
  *	cpu_v6_set_pte(ptep, pte)
  *
@@ -139,24 +133,24 @@ ENTRY(cpu_v6_switch_mm)
 ENTRY(cpu_v6_set_pte)
 	str	r1, [r0], #-2048		@ linux version
 
-	bic	r2, r1, #0x00000ff0
+	bic	r2, r1, #0x000007f0
 	bic	r2, r2, #0x00000003
-	orr	r2, r2, #AP0 | 2
+	orr	r2, r2, #PTE_EXT_AP0 | 2
 
 	tst	r1, #L_PTE_WRITE
 	tstne	r1, #L_PTE_DIRTY
-	orreq	r2, r2, #APX
+	orreq	r2, r2, #PTE_EXT_APX
 
 	tst	r1, #L_PTE_USER
-	orrne	r2, r2, #AP1 | nG
-	tstne	r2, #APX
-	bicne	r2, r2, #APX | AP0
+	orrne	r2, r2, #PTE_EXT_AP1
+	tstne	r2, #PTE_EXT_APX
+	bicne	r2, r2, #PTE_EXT_APX | PTE_EXT_AP0
 
 	tst	r1, #L_PTE_YOUNG
-	biceq	r2, r2, #APX | AP1 | AP0
+	biceq	r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK
 
 @	tst	r1, #L_PTE_EXEC
-@	orreq	r2, r2, #XN
+@	orreq	r2, r2, #PTE_EXT_XN
 
 	tst	r1, #L_PTE_PRESENT
 	moveq	r2, #0

arch/ia64/kernel/domain.c

@@ -341,7 +341,7 @@ void build_sched_domains(const cpumask_t *cpu_map)
 #endif
 
 	/* Attach the domains */
-	for_each_online_cpu(i) {
+	for_each_cpu_mask(i, *cpu_map) {
 		struct sched_domain *sd;
 #ifdef CONFIG_SCHED_SMT
 		sd = &per_cpu(cpu_domains, i);

arch/ia64/kernel/process.c

@@ -179,7 +179,7 @@ static int can_do_pal_halt = 1;
 
 static int __init nohalt_setup(char * str)
 {
-	pal_halt = 0;
+	pal_halt = can_do_pal_halt = 0;
 	return 1;
 }
 __setup("nohalt", nohalt_setup);