Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/arm/arm-soc

Pull ARM SoC multiplatform support from Arnd Bergmann:
 "Converting more ARM platforms to multiplatform support.  This time,
  OMAP gets converted, which is a major step since this is by far the
  largest platform in terms of code size.  The same thing happens to the
  vt8500 platform."

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  net: cwdavinci_cpdma: export symbols for cpsw
  remoteproc: omap: depend on OMAP_MBOX_FWK
  [media] davinci: do not include mach/hardware.h
  ARM: OMAP2+: Make sure files with omap initcalls include soc.h
  ARM: OMAP2+: Include soc.h to drm.c to fix compiling
  ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall
  ARM: multi_v7_defconfig: add ARCH_ZYNQ
  ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB
  arm: vt8500: Remove remaining mach includes
  arm: vt8500: Convert debug-macro.S to be multiplatform friendly
  arm: vt8500: Remove single platform Kconfig options
  ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
  ARM: OMAP2+: Add minimal support for booting vexpress
  ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
  ARM: OMAP2+: Disable code that currently does not work with multiplaform
  ARM: OMAP2+: Add multiplatform debug_ll support
  ARM: OMAP: Fix dmaengine init for multiplatform
  ARM: OMAP: Fix i2c cmdline initcall for multiplatform
  ARM: OMAP2+: Use omap initcalls
  ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels

arch/arm/Kconfig

@@ -932,32 +932,24 @@ config ARCH_DAVINCI
 	help
 	  Support for TI's DaVinci platform.
 
-config ARCH_OMAP
-	bool "TI OMAP"
+config ARCH_OMAP1
+	bool "TI OMAP1"
 	depends on MMU
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Support for TI's OMAP platform (OMAP1/2/3/4).
-
-config ARCH_VT8500_SINGLE
-	bool "VIA/WonderMedia 85xx"
-	select ARCH_HAS_CPUFREQ
+	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select COMMON_CLK
-	select CPU_ARM926T
+	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
 	select HAVE_CLK
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select USE_OF
+	select HAVE_IDE
+	select IRQ_DOMAIN
+	select NEED_MACH_IO_H if PCCARD
+	select NEED_MACH_MEMORY_H
 	help
-	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
+	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
 
 endchoice
 

arch/arm/Kconfig.debug

@@ -291,6 +291,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MVEBU based platforms.
 
+	config DEBUG_OMAP2PLUS_UART
+		bool "Kernel low-level debugging messages via OMAP2PLUS UART"
+		depends on ARCH_OMAP2PLUS
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on OMAP2PLUS based platforms.
+
 	config DEBUG_PICOXCELL_UART
 		depends on ARCH_PICOXCELL
 		bool "Use PicoXcell UART for low-level debug"
@@ -412,6 +419,13 @@ choice
 		  of the tiles using the RS1 memory map, including all new A-class
 		  core tiles, FPGA-based SMMs and software models.
 
+	config DEBUG_VT8500_UART0
+		bool "Use UART0 on VIA/Wondermedia SoCs"
+		depends on ARCH_VT8500
+		help
+		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
+		  devices, including VT8500, WM8505, WM8650 and WM8850.
+
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
 		depends on !ARCH_MULTIPLATFORM
@@ -459,6 +473,54 @@ config DEBUG_IMX6Q_UART_PORT
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
 
+choice
+	prompt "Low-level debug console UART"
+	depends on DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_OMAP2UART1
+		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
+		help
+		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
+		  omap3 torpedo and 3530 lv som.
+
+	config DEBUG_OMAP2UART2
+		bool "OMAP2/3/4 UART2"
+
+	config DEBUG_OMAP2UART3
+		bool "OMAP2 UART3 (n8x0)"
+
+	config DEBUG_OMAP3UART3
+		bool "OMAP3 UART3 (most omap3 boards)"
+		help
+		  This covers at least cm_t3x, beagle, crane, devkit8000,
+		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
+		  and 3517evm.
+
+	config DEBUG_OMAP4UART3
+		bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
+
+	config DEBUG_OMAP3UART4
+		bool "OMAP36XX UART4"
+
+	config DEBUG_OMAP4UART4
+		bool "OMAP4/5 UART4"
+
+	config DEBUG_TI81XXUART1
+		bool "TI81XX UART1 (ti8148evm)"
+
+	config DEBUG_TI81XXUART2
+		bool "TI81XX UART2"
+
+	config DEBUG_TI81XXUART3
+		bool "TI81XX UART3 (ti8168evm)"
+
+	config DEBUG_AM33XXUART1
+		bool "AM33XX UART1"
+
+	config DEBUG_ZOOM_UART
+		bool "Zoom2/3 UART"
+endchoice
+
 choice
 	prompt "Low-level debug console UART"
 	depends on DEBUG_LL && DEBUG_TEGRA_UART
@@ -501,11 +563,13 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
+	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
 		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "mach/debug-macro.S"

arch/arm/configs/multi_v7_defconfig

@@ -8,6 +8,7 @@ CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_SOCFPGA=y
 CONFIG_ARCH_SUNXI=y
 # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
+CONFIG_ARCH_ZYNQ=y
 CONFIG_ARM_ERRATA_754322=y
 CONFIG_SMP=y
 CONFIG_ARM_ARCH_TIMER=y
@@ -39,7 +40,6 @@ CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
-CONFIG_GPIOLIB=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y

arch/arm/configs/omap2plus_defconfig

@@ -20,9 +20,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_ARCH_VEXPRESS_CA9X4=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
@@ -121,6 +122,8 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
@@ -194,6 +197,7 @@ CONFIG_USB_ZERO=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_SDIO_UART=y
+CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_RTC_CLASS=y

arch/arm/mach-omap2/include/mach/debug-macro.S → arch/arm/include/debug/omap2plus.S

@@ -1,5 +1,4 @@
-/* arch/arm/mach-omap2/include/mach/debug-macro.S
- *
+/*
  * Debugging macro include header
  *
  *  Copyright (C) 1994-1999 Russell King
@@ -13,7 +12,49 @@
 
 #include <linux/serial_reg.h>
 
-#include <mach/serial.h>
+/* OMAP2 serial ports */
+#define OMAP2_UART1_BASE	0x4806a000
+#define OMAP2_UART2_BASE	0x4806c000
+#define OMAP2_UART3_BASE	0x4806e000
+
+/* OMAP3 serial ports */
+#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE	0x49020000
+#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
+
+/* OMAP4 serial ports */
+#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE	0x48020000
+#define OMAP4_UART4_BASE	0x4806e000
+
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE	0x48020000
+#define TI81XX_UART2_BASE	0x48022000
+#define TI81XX_UART3_BASE	0x48024000
+
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
+
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE	0x44E09000
+
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE	0x48066000
+#define OMAP5_UART6_BASE	0x48068000
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE		0x10000000
+#define ZOOM_UART_VIRT		0xfa400000
+
+#define OMAP_PORT_SHIFT		2
+#define ZOOM_PORT_SHIFT		1
 
 #define UART_OFFSET(addr)	((addr) & 0x00ffffff)
 
@@ -23,12 +64,6 @@ omap_uart_virt:	.word	0
 omap_uart_lsr:	.word	0
 		.popsection
 
-		/*
-		 * Note that this code won't work if the bootloader passes
-		 * a wrong machine ID number in r1. To debug, just hardcode
-		 * the desired UART phys and virt addresses temporarily into
-		 * the omap_uart_phys and omap_uart_virt above.
-		 */
 		.macro	addruart, rp, rv, tmp
 
 		/* Use omap_uart_phys/virt if already configured */
@@ -43,74 +78,64 @@ omap_uart_lsr:	.word	0
 		cmpne	\rv, #0
 		bne	100f			@ already configured
 
-		/* Check the debug UART configuration set in uncompress.h */
-		mov	\rp, pc
-		ldr	\rv, =OMAP_UART_INFO_OFS
-		and	\rp, \rp, #0xff000000
-		ldr	\rp, [\rp, \rv]
-
-		/* Select the UART to use based on the UART1 scratchpad value */
-		cmp	\rp, #0			@ no port configured?
-		beq	21f			@ if none, try to use UART1
-		cmp	\rp, #OMAP2UART1	@ OMAP2/3/4UART1
-		beq	21f			@ configure OMAP2/3/4UART1
-		cmp	\rp, #OMAP2UART2	@ OMAP2/3/4UART2
-		beq	22f			@ configure OMAP2/3/4UART2
-		cmp	\rp, #OMAP2UART3	@ only on 24xx
-		beq	23f			@ configure OMAP2UART3
-		cmp	\rp, #OMAP3UART3	@ only on 34xx
-		beq	33f			@ configure OMAP3UART3
-		cmp	\rp, #OMAP4UART3	@ only on 44xx/54xx
-		beq	43f			@ configure OMAP4/5UART3
-		cmp	\rp, #OMAP3UART4	@ only on 36xx
-		beq	34f			@ configure OMAP3UART4
-		cmp	\rp, #OMAP4UART4	@ only on 44xx/54xx
-		beq	44f			@ configure OMAP4/5UART4
-		cmp	\rp, #TI81XXUART1	@ ti81Xx UART offsets different
-		beq	81f			@ configure UART1
-		cmp	\rp, #TI81XXUART2	@ ti81Xx UART offsets different
-		beq	82f			@ configure UART2
-		cmp	\rp, #TI81XXUART3	@ ti81Xx UART offsets different
-		beq	83f			@ configure UART3
-		cmp	\rp, #AM33XXUART1	@ AM33XX UART offsets different
-		beq	84f			@ configure UART1
-		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
-		beq	95f			@ configure ZOOM_UART
-
 		/* Configure the UART offset from the phys/virt base */
-21:		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
+#ifdef CONFIG_DEBUG_OMAP2UART1
+		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
 		b	98f
-22:		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
+#endif
+#ifdef CONFIG_DEBUG_OMAP2UART2
+		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
 		b	98f
-23:		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
+#endif
+#ifdef CONFIG_DEBUG_OMAP2UART3
+		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
 		b	98f
-33:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+#endif
+#ifdef CONFIG_DEBUG_OMAP3UART3
+		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
 		add	\rp, \rp, #0x00fb0000
 		add	\rp, \rp, #0x00006000		@ OMAP3_UART3_BASE
 		b	98f
-34:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+#endif
+#ifdef CONFIG_DEBUG_OMAP4UART3
+		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
+		b	98f
+#endif
+#ifdef CONFIG_DEBUG_OMAP3UART4
+		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
 		add	\rp, \rp, #0x00fb0000
 		add	\rp, \rp, #0x00028000		@ OMAP3_UART4_BASE
 		b	98f
-43:		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
-		b	98f
-44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
+#endif
+#ifdef CONFIG_DEBUG_OMAP4UART4
+		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
-81:		mov	\rp, #UART_OFFSET(TI81XX_UART1_BASE)
+#endif
+#ifdef CONFIG_DEBUG_TI81XXUART1
+		mov	\rp, #UART_OFFSET(TI81XX_UART1_BASE)
 		b	98f
-82:		mov	\rp, #UART_OFFSET(TI81XX_UART2_BASE)
+#endif
+#ifdef CONFIG_DEBUG_TI81XXUART2
+		mov	\rp, #UART_OFFSET(TI81XX_UART2_BASE)
 		b	98f
-83:		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
+#endif
+#ifdef CONFIG_DEBUG_TI81XXUART3
+		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
 		b	98f
-84:		ldr	\rp, =AM33XX_UART1_BASE
+#endif
+#ifdef CONFIG_DEBUG_AM33XXUART1
+		ldr	\rp, =AM33XX_UART1_BASE
 		and	\rp, \rp, #0x00ffffff
 		b	97f
-95:		ldr	\rp, =ZOOM_UART_BASE
+#endif
+#ifdef CONFIG_DEBUG_ZOOM_UART
+		ldr	\rp, =ZOOM_UART_BASE
 		str	\rp, [\tmp, #0]		@ omap_uart_phys
 		ldr	\rp, =ZOOM_UART_VIRT
 		str	\rp, [\tmp, #4]		@ omap_uart_virt
 		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
 		str	\rp, [\tmp, #8]		@ omap_uart_lsr
+#endif
 		b	10b
 
 		/* AM33XX: Store both phys and virt address for the uart */