---

yaml
---
r: 130415
b: refs/heads/master
c: ceb5eb0
h: refs/heads/master
i:
  130413: 802ec58
  130411: e0636df
  130407: 8fb5256
  130399: a229dfd
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1448d7c6a2ff96d3b52ecae49e2d0f046a097fe0
+refs/heads/master: ceb5eb0cb3fe61d488aa76aba748409775a56daa

trunk/Documentation/cgroups/memcg_test.txt

@@ -1,6 +1,6 @@
 Memory Resource Controller(Memcg)  Implementation Memo.
-Last Updated: 2008/12/15
-Base Kernel Version: based on 2.6.28-rc8-mm.
+Last Updated: 2009/1/19
+Base Kernel Version: based on 2.6.29-rc2.
 
 Because VM is getting complex (one of reasons is memcg...), memcg's behavior
 is complex. This is a document for memcg's internal behavior.
@@ -340,3 +340,23 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	# mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices
 
 	and do task move, mkdir, rmdir etc...under this.
+
+ 9.7 swapoff.
+	Besides management of swap is one of complicated parts of memcg,
+	call path of swap-in at swapoff is not same as usual swap-in path..
+	It's worth to be tested explicitly.
+
+	For example, test like following is good.
+	(Shell-A)
+	# mount -t cgroup none /cgroup -t memory
+	# mkdir /cgroup/test
+	# echo 40M > /cgroup/test/memory.limit_in_bytes
+	# echo 0 > /cgroup/test/tasks
+	Run malloc(100M) program under this. You'll see 60M of swaps.
+	(Shell-B)
+	# move all tasks in /cgroup/test to /cgroup
+	# /sbin/swapoff -a
+	# rmdir /test/cgroup
+	# kill malloc task.
+
+	Of course, tmpfs v.s. swapoff test should be tested, too.

trunk/Documentation/filesystems/nfs-rdma.txt

@@ -251,7 +251,7 @@ NFS/RDMA Setup
 
     Instruct the server to listen on the RDMA transport:
 
-    $ echo rdma 2050 > /proc/fs/nfsd/portlist
+    $ echo rdma 20049 > /proc/fs/nfsd/portlist
 
   - On the client system
 
@@ -263,7 +263,7 @@ NFS/RDMA Setup
     Regardless of how the client was built (module or built-in), use this
     command to mount the NFS/RDMA server:
 
-    $ mount -o rdma,port=2050 <IPoIB-server-name-or-address>:/<export> /mnt
+    $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt
 
     To verify that the mount is using RDMA, run "cat /proc/mounts" and check
     the "proto" field for the given mount.

trunk/Documentation/filesystems/proc.txt

@@ -2027,6 +2027,34 @@ increase the likelihood of this process being killed by the oom-killer.  Valid
 values are in the range -16 to +15, plus the special value -17, which disables
 oom-killing altogether for this process.
 
+The process to be killed in an out-of-memory situation is selected among all others
+based on its badness score. This value equals the original memory size of the process
+and is then updated according to its CPU time (utime + stime) and the
+run time (uptime - start time). The longer it runs the smaller is the score.
+Badness score is divided by the square root of the CPU time and then by
+the double square root of the run time.
+
+Swapped out tasks are killed first. Half of each child's memory size is added to
+the parent's score if they do not share the same memory. Thus forking servers
+are the prime candidates to be killed. Having only one 'hungry' child will make
+parent less preferable than the child.
+
+/proc/<pid>/oom_score shows process' current badness score.
+
+The following heuristics are then applied:
+ * if the task was reniced, its score doubles
+ * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE
+ 	or CAP_SYS_RAWIO) have their score divided by 4
+ * if oom condition happened in one cpuset and checked task does not belong
+ 	to it, its score is divided by 8
+ * the resulting score is multiplied by two to the power of oom_adj, i.e.
+	points <<= oom_adj when it is positive and
+	points >>= -(oom_adj) otherwise
+
+The task with the highest badness score is then selected and its children
+are killed, process itself will be killed in an OOM situation when it does
+not have children or some of them disabled oom like described above.
+
 2.13 /proc/<pid>/oom_score - Display current oom-killer score
 -------------------------------------------------------------
 

trunk/Documentation/kbuild/kbuild.txt

@@ -3,7 +3,7 @@ Environment variables
 KCPPFLAGS
 --------------------------------------------------
 Additional options to pass when preprocessing. The preprocessing options
-will be used in all cases where kbuild do preprocessing including
+will be used in all cases where kbuild does preprocessing including
 building C files and assembler files.
 
 KAFLAGS
@@ -16,7 +16,7 @@ Additional options to the C compiler.
 
 KBUILD_VERBOSE
 --------------------------------------------------
-Set the kbuild verbosity. Can be assinged same values as "V=...".
+Set the kbuild verbosity. Can be assigned same values as "V=...".
 See make help for the full list.
 Setting "V=..." takes precedence over KBUILD_VERBOSE.
 
@@ -35,14 +35,14 @@ KBUILD_OUTPUT
 --------------------------------------------------
 Specify the output directory when building the kernel.
 The output directory can also be specificed using "O=...".
-Setting "O=..." takes precedence over KBUILD_OUTPUT
+Setting "O=..." takes precedence over KBUILD_OUTPUT.
 
 ARCH
 --------------------------------------------------
 Set ARCH to the architecture to be built.
 In most cases the name of the architecture is the same as the
 directory name found in the arch/ directory.
-But some architectures suach as x86 and sparc has aliases.
+But some architectures such as x86 and sparc have aliases.
 x86: i386 for 32 bit, x86_64 for 64 bit
 sparc: sparc for 32 bit, sparc64 for 64 bit
 
@@ -63,7 +63,7 @@ CF is often used on the command-line like this:
 INSTALL_PATH
 --------------------------------------------------
 INSTALL_PATH specifies where to place the updated kernel and system map
-images. Default is /boot, but you can set it to other values
+images. Default is /boot, but you can set it to other values.
 
 
 MODLIB
@@ -90,7 +90,7 @@ INSTALL_MOD_STRIP will used as the options to the strip command.
 
 INSTALL_FW_PATH
 --------------------------------------------------
-INSTALL_FW_PATH specify where to install the firmware blobs.
+INSTALL_FW_PATH specifies where to install the firmware blobs.
 The default value is:
 
     $(INSTALL_MOD_PATH)/lib/firmware
@@ -99,7 +99,7 @@ The value can be overridden in which case the default value is ignored.
 
 INSTALL_HDR_PATH
 --------------------------------------------------
-INSTALL_HDR_PATH specify where to install user space headers when
+INSTALL_HDR_PATH specifies where to install user space headers when
 executing "make headers_*".
 The default value is:
 
@@ -112,22 +112,23 @@ The value can be overridden in which case the default value is ignored.
 
 KBUILD_MODPOST_WARN
 --------------------------------------------------
-KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
-symbols in the final module linking stage.
+KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined
+symbols in the final module linking stage. It changes such errors
+into warnings.
 
-KBUILD_MODPOST_FINAL
+KBUILD_MODPOST_NOFINAL
 --------------------------------------------------
 KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
-This is solely usefull to speed up test compiles.
+This is solely useful to speed up test compiles.
 
 KBUILD_EXTRA_SYMBOLS
 --------------------------------------------------
-For modules use symbols from another modules.
+For modules that use symbols from other modules.
 See more details in modules.txt.
 
 ALLSOURCE_ARCHS
 --------------------------------------------------
-For tags/TAGS/cscope targets, you can specify more than one archs
-to be included in the databases, separated by blankspace. e.g.
+For tags/TAGS/cscope targets, you can specify more than one arch
+to be included in the databases, separated by blank space. E.g.:
 
     $ make ALLSOURCE_ARCHS="x86 mips arm" tags

trunk/Documentation/kernel-parameters.txt

@@ -577,9 +577,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for a example.
 
-	cs4232=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
-
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -732,10 +729,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Default value is 0.
 			Value can be changed at runtime via /selinux/enforce.
 
-	es1371=		[HW,OSS]
-			Format: <spdif>,[<nomix>,[<amplifier>]]
-			See also header of sound/oss/es1371.c.
-
 	ether=		[HW,NET] Ethernet cards parameters
 			This option is obsoleted by the "netdev=" option, which
 			has equivalent usage. See its documentation for details.

trunk/Documentation/networking/netconsole.txt

@@ -51,7 +51,8 @@ Built-in netconsole starts immediately after the TCP stack is
 initialized and attempts to bring up the supplied dev at the supplied
 address.
 
-The remote host can run either 'netcat -u -l -p <port>' or syslogd.
+The remote host can run either 'netcat -u -l -p <port>',
+'nc -l -u <port>' or syslogd.
 
 Dynamic reconfiguration:
 ========================

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -349,6 +349,7 @@ STAC92HD73*
 STAC92HD83*
 ===========
   ref		Reference board
+  mic-ref	Reference board with power managment for ports
 
 STAC9872
 ========

trunk/MAINTAINERS

@@ -2102,7 +2102,8 @@ M:	khali@linux-fr.org
 P:	Ben Dooks (embedded platforms)
 M:	ben-linux@fluff.org
 L:	linux-i2c@vger.kernel.org
-T:	quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
+W:	http://i2c.wiki.kernel.org/
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
 S:	Maintained
 
 I2C-TINY-USB DRIVER

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
@@ -213,6 +213,10 @@ endif
 # Where to locate arch specific headers
 hdr-arch  := $(SRCARCH)
 
+ifeq ($(ARCH),m68knommu)
+       hdr-arch  := m68k
+endif
+
 KCONFIG_CONFIG	?= .config
 
 # SHELL used by kbuild
@@ -606,25 +610,20 @@ export	INSTALL_PATH ?= /boot
 MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 export MODLIB
 
-strip-symbols := $(srctree)/scripts/strip-symbols \
-		 $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols)
-
 #
-# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while
-# they get installed.  If INSTALL_MOD_STRIP is '1', then the default
-# options (see below) will be used.  Otherwise, INSTALL_MOD_STRIP will
-# be used as the option(s) to the objcopy command.
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP will used as the options to the strip command.
+
 ifdef INSTALL_MOD_STRIP
 ifeq ($(INSTALL_MOD_STRIP),1)
-mod_strip_cmd = $(OBJCOPY) --strip-debug
-ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED))
-mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols))
-endif
+mod_strip_cmd = $(STRIP) --strip-debug
 else
-mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP)
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 endif # INSTALL_MOD_STRIP=1
 else
-mod_strip_cmd = false
+mod_strip_cmd = true
 endif # INSTALL_MOD_STRIP
 export mod_strip_cmd
 
@@ -754,7 +753,6 @@ last_kallsyms := 2
 endif
 
 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
-kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h)
 
 define verify_kallsyms
 	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
@@ -779,41 +777,24 @@ endef
 
 # Generate .S file with all kernel symbols
 quiet_cmd_kallsyms = KSYM    $@
-      cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \
-		     | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@
+      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
 
-quiet_cmd_kstrip = STRIP   $@
-      cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@
-
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
 	$(call if_changed_dep,as_o_S)
 
-ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y)
-strip-ext := .stripped
-endif
-
-.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h)
+.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
 	$(call cmd,kallsyms)
 
-# make -jN seems to have problems with intermediate files, see bug #3330.
-.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped)
-.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h)
-	$(call cmd,kstrip)
-
-ifneq ($(CONFIG_DEBUG_INFO),y)
-.tmp_vmlinux%: LDFLAGS_vmlinux += -S
-endif
 # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE
-	$(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__))
+.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
+	$(call if_changed_rule,ksym_ld)
 
-.tmp_vmlinux0$(strip-ext):
-	$(Q)echo "placeholder" >$@
+.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
+	$(call if_changed,vmlinux__)
 
-.tmp_vmlinux1: .tmp_kallsyms0.o
-.tmp_vmlinux2: .tmp_kallsyms1.o
-.tmp_vmlinux3: .tmp_kallsyms2.o
+.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
+	$(call if_changed,vmlinux__)
 
 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 $(KALLSYMS): scripts ;

trunk/arch/alpha/Kconfig

@@ -8,6 +8,7 @@ config ALPHA
 	select HAVE_AOUT
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_SYSCALL_WRAPPERS
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,

trunk/arch/alpha/include/asm/bug.h

@@ -8,17 +8,12 @@
 
 /* ??? Would be nice to use .gprel32 here, but we can't be sure that the
    function loaded the GP, so this could fail in modules.  */
-static inline void ATTRIB_NORET __BUG(const char *file, int line)
-{
-	__asm__ __volatile__(
-		"call_pal %0  # bugchk\n\t"
-		".long %1\n\t.8byte %2"
-		       : : "i" (PAL_bugchk), "i"(line), "i"(file));
-	for ( ; ; )
-		;
-}
-
-#define BUG() __BUG(__FILE__, __LINE__)
+#define BUG()	{							\
+	__asm__ __volatile__(						\
+		"call_pal %0  # bugchk\n\t"				\
+		".long %1\n\t.8byte %2"					\
+		: : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__));	\
+	for ( ; ; ); }
 
 #define HAVE_ARCH_BUG
 #endif

trunk/arch/alpha/include/asm/dma-mapping.h

@@ -29,6 +29,8 @@
 
 #else	/* no PCI - no IOMMU. */
 
+#include <asm/io.h>	/* for virt_to_phys() */
+
 struct scatterlist;
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			 dma_addr_t *dma_handle, gfp_t gfp);

trunk/arch/alpha/kernel/entry.S

@@ -933,7 +933,7 @@ sys_execve:
 osf_sigprocmask:
 	.prologue 0
 	mov	$sp, $18
-	jmp	$31, do_osf_sigprocmask
+	jmp	$31, sys_osf_sigprocmask
 .end osf_sigprocmask
 
 	.align	4